Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. DFB2505 - DFB25100 Glass-Passivated Bridge Rectifiers Features * * * * * * * * UL Certificate: # E258596 Glass-Passivated Junction Ideal for Printed Circuit Board Reliable Low-Cost Construction Plastic Material has Underwriters Laboratory Flammability Classification 94V-0 Surge Overload Rating: 350 A Peak High Case Dielectric Strength: 2500 VRMS Isolated Voltage from Case to Lead: > 2500 V + ~ ~ - TS-6P Ordering Informations Part Number Marking DFB2505 DFB2505 DFB2510 DFB2510 DFB2520 DFB2520 DFB2540 DFB2540 DFB2560 DFB2560 DFB2580 DFB2580 DFB25100 DFB25100 (c) 2009 Fairchild Semiconductor Corporation DFB2505 - DFB25100 Rev. 1.2.2 Package Packing Method TS-6P 4L Rail www.fairchildsemi.com 1 DFB2505 - DFB25100 -- Glass-Passivated Bridge Rectifiers November 2013 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Value Symbol Parameter DFB25 DFB25 DFB25 DFB25 DFB25 DFB25 DFB25 05 10 20 40 60 80 100 Unit VRRM Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Voltage 35 70 140 280 420 560 700 V VDC Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V I(AV) Maximum Average Forward Rectified Current 25 A IFSM Peak Forward Surge Current (8.3 ms Single Half-wave) 350 A RJC Typical Thermal Resistance(2) 4.75 C/W TJ Operating Temperature Range -55 to +150 C Storage Temperature Range -55 to +150 C TSTG Notes: 1. Single-phase, half-wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 2. Device mounted on 4 inch x 6 inch x 0.25 inch Al-plate heat sink. Electrical Characteristics Values are at TA = 25C unless otherwise specified. Symbol Parameter Conditions Value Unit Maximum Forward Voltage 12.5 A 1.0 Instantaneous Forward Voltage 25 A 1.1 IR Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25C 10 TA = 125C 500 I2t Rating for fusing (t < 8.3 ms) 508 A 2s CJ Typical Junction Capacitance per Leg(3) 110 pF VF V A Note: 3. Measured at 1 MHz and applied reverse bias of 4.0 V DC. (c) 2009 Fairchild Semiconductor Corporation DFB2505 - DFB25100 Rev. 1.2.2 www.fairchildsemi.com 2 DFB2505 - DFB25100 -- Glass-Passivated Bridge Rectifiers Absolute Maximum Ratings(1) Figure 1. Maximum Derating Curve for Output Current Figure 2. Maximum Forward Surge Current Figure 3. Typical Reverse Characteristics per Leg Figure 4. Typical Forward Characteristics per Leg Figure 5. Typical Junction Capacitance (c) 2009 Fairchild Semiconductor Corporation DFB2505 - DFB25100 Rev. 1.2.2 www.fairchildsemi.com 3 DFB2505 - DFB25100 -- Glass-Passivated Bridge Rectifiers Typical Performance Characteristics 30.30 29.70 CL 3.40 3.10 3.0 x45 11.20 10.80 4.20 3.80 + ~ ~ 4.80 4.40 4.80 3.80 3.40 20.30 19.70 - 2.50 2.40 (4X) 2.00 18.00 17.00 2.90 2.50 1.10 (4X) 0.90 10.20 9.80 7.70 7.30 7.70 7.30 0.70 0.60 NOTES: A. THIS PACKAGE DOES NOT CONFORM TO ANY STANDARDS. B. ALL DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. D. DRAWING FILE NAME: TS6P04AREV2 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com