ALUMINUM ELECTROLYTIC CAPACITORS PT Miniature Sized, High Ripple Current, Long Life series PB High ripple current. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). Smaller PT Smaller PZ Specifications Item Performance Characteristics Category Temperature Range - 25 to +105C Rated Voltage Range 200 to 450V Rated Capacitance Range 15 to 820F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (A) Measurement frequency : 120Hz, Temperature : 20C Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) 200 0.12 220 0.12 250 0.12 400 0.15 420 0.20 450 0.20 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z- 25C / Z+20C 200 220 250 400 420 450 3 3 3 8 8 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 5000 hours at 105C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Type numbering system (Example : 250V 220F) Radial Lead Type 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U P T 2 E 2 2 1 M HD T d Size code Capacitance tolerance ( 20%) D+ P 0.5 MAX. Configuration Rated capacitance (220F) Rated voltage (250V) Series name Pressure relief vent L+ 15 MIN MAX. 4 MIN Type Configuration D (mm) D 10 12.5 16 18 20 22 25 P 5.0 5.0 7.5 7.5 10.0 10.0 12.5 d 0.6 0.6 0.8 0.8 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 1.0 1.0 Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 20 to 25 HD RD In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. (D < 20) : 1 .5 (D 20) : 2 .0 * Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS PT series Dimensions V Cap Code 200 220 250 400 420 450 2D 2P 2E 2G W6 2W 10 x 31.5 15 150 18 180 22 220 0.21 27 270 12.5 x 25 0.24 33 330 12.5 x 31.5 39 390 12.5 x 31.5 47 470 56 560 68 680 82 100 120 150 180 220 270 820 101 121 151 181 221 271 10 x 31.5 10 x 31.5 10 x 31.5 10 x 31.5 10 x 31.5 12.5 x 25 12.5 x 31.5 12.5 x 31.5 12.5 x 35.5 12.5 x 40 0.35 0.41 0.48 0.53 0.62 12.5 x 25 12.5 x 31.5 12.5 x 31.5 12.5 x 35.5 12.5 x 40 0.39 0.43 0.49 0.67 12.5 x 31.5 12.5 x 35.5 12.5 x 40 16 x 31.5 0.40 0.46 0.53 0.62 16 x 35.5 0.72 18 x 31.5 0.72 0.77 16 x 40 0.83 18 x 31.5 0.77 18 x 35.5 0.83 16 x 35.5 0.88 16 x 40 0.88 18 x 31.5 18 x 35.5 18 x 40 0.95 0.87 0.88 18 x 35.5 1.01 18 x 40 1.01 18 x 40 1.13 22 x 40 1.15 470 471 22 x 40 1.20 821 25 x 50 1.60 12.5 x 35.5 0.28 0.31 12.5 x 40 0.32 12.5 x 40 0.36 391 820 0.27 12.5 x 35.5 12.5 x 31.5 16 x 35.5 1.50 12.5 x 31.5 0.32 0.34 0.81 25 x 40 0.29 0.42 0.76 1.50 0.25 0.37 18 x 31.5 22 x 50 0.22 12.5 x 31.5 12.5 x 40 331 681 12.5 x 31.5 0.24 12.5 x 35.5 390 680 0.20 12.5 x 31.5 0.31 16 x 31.5 561 12.5 x 25 0.27 330 560 0.18 12.5 x 25 0.58 16 x 31.5 0.70 12.5 x 25 0.29 22 x 50 1.50 25 x 40 1.50 25 x 50 1.60 22 x 40 1.05 22 x 50 1.45 25 x 40 1.45 25 x 50 1.55 16 x 31.5 16 x 31.5 0.46 0.50 16 x 35.5 0.58 18 x 31.5 0.58 16 x 40 0.66 18 x 35.5 0.67 18 x 40 0.77 22 x 40 0.15 0.17 0.85 22 x 50 1.30 25 x 40 1.30 25 x 50 1.40 0.36 16 x 31.5 0.38 16 x 31.5 0.43 16 x 35.5 0.44 16 x 35.5 0.51 16 x 40 0.49 18 x 31.5 0.51 18 x 31.5 0.48 16 x 40 0.57 18 x 31.5 18 x 35.5 0.55 0.57 18 x 35.5 0.61 18 x 40 0.65 18 x 40 0.66 22 x 40 0.77 22 x 40 0.80 22 x 50 0.92 25 x 40 0.92 25 x 50 1.10 22 x 50 0.95 25 x 40 0.95 25 x 50 1.20 Case size D x L (mm) : Rated ripple current (Arms) at 105C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.80 1.00 1.25 1.40 1.60 CAT.8100Z