MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 Preferred Devices SWITCHMODE Power Rectifiers . . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state-of-the-art devices have the following features: * * * * * * * * http://onsemi.com Ultrafast 25, 50 and 75 Nanosecond Recovery Time 175C Operating Junction Temperature Popular TO-220 Package Epoxy Meets UL94, VO @ 1/8 Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction Reverse Voltage to 600 Volts ULTRAFAST RECTIFIERS 8.0 AMPERES 50-600 VOLTS 1 4 3 Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 1.9 grams (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped 50 units per plastic tube Marking: U805, U810, U815, U820, U840, U860 4 MARKING DIAGRAM U8xx MAXIMUM RATINGS 1 Please See the Table on the Following Page 3 CASE 221B TO-220AC PLASTIC U8xx = Device Code xx = 05, 10, 15, = 20, 40 or 60 ORDERING INFORMATION Device Package Shipping MUR805 TO-220 50 Units/Rail MUR810 TO-220 50 Units/Rail MUR815 TO-220 50 Units/Rail MUR820 TO-220 50 Units/Rail MUR840 TO-220 50 Units/Rail MUR860 TO-220 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2000 October, 2000 - Rev. 4 1 Publication Order Number: MUR820/D MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MAXIMUM RATINGS MUR Symbol 805 810 815 820 840 860 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 200 400 600 Volts Average Rectified Forward Current Total Device, (Rated VR), TC = 150C IF(AV) 8.0 Amps Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz), TC = 150C IFM 16 Amps Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 100 Amps TJ, Tstg -65 to +175 C Rating Operating Junction Temperature and Storage Temperature Range THERMAL CHARACTERISTICS Maximum Thermal Resistance, Junction to Case RJC 3.0 C/W 2.0 ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 1.) (iF = 8.0 Amps, TC = 150C) (iF = 8.0 Amps, TC = 25C) vF Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TJ = 150C) (Rated dc Voltage, TJ = 25C) iR Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/s) (IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 Amp) trr Volts 0.895 0.975 1.00 1.30 1.20 1.50 A 250 5.0 500 10 35 25 60 50 ns 1. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. http://onsemi.com 2 MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR805, MUR810, MUR815, MUR820 1000 100 IR, REVERSE CURRENT ( A) 70 50 20 10 25C 0.1 10 0.01 7.0 100C 1.0 0 20 40 60 120 140 160 180 200 Figure 2. Typical Reverse Current* * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 3.0 2.0 TJ = 175C 100C 25C 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 10 9.0 RATED VR APPLIED 8.0 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 150 vF, INSTANTANEOUS VOLTAGE (VOLTS) 12 RJA = 16C/W RJA = 60C/W (NO HEAT SINK) dc 10 SQUARE WAVE 8.0 6.0 4.0 dc 2.0 SQUARE WAVE 0 0 20 40 60 80 100 120 140 170 180 Figure 3. Current Derating, Case PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 14 160 TC, CASE TEMPERATURE (C) Figure 1. Typical Forward Voltage IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 100 80 VR, REVERSE VOLTAGE (VOLTS) 5.0 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 TJ = 175C 100 160 180 200 10 9.0 TJ = 175C 8.0 7.0 SQUARE WAVE 6.0 dc 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient Figure 5. Power Dissipation http://onsemi.com 3 9.0 10 MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR840 100 1000 IR, REVERSE CURRENT ( A) 70 50 20 25C 0.1 0.01 0 50 100 150 TJ = 175C 250 300 350 400 450 500 Figure 7. Typical Reverse Current* 25C 3.0 * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 100C 2.0 1.0 0.5 0.3 0.2 0.4 0.6 0.8 1.0 1.4 1.2 1.6 dc 8.0 SQUARE WAVE dc 2.0 SQUARE WAVE 0 20 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 160 150 170 Figure 8. Current Derating, Case 12 4.0 RATED VR APPLIED 8.0 Figure 6. Typical Forward Voltage RJA = 16C/W RJA = 60C/W (NO HEAT SINK) 6.0 9.0 TC, CASE TEMPERATURE (C) 14 10 10 vF, INSTANTANEOUS VOLTAGE (VOLTS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0.1 0 200 VR, REVERSE VOLTAGE (VOLTS) 5.0 0.7 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 100C 1.0 10 7.0 150C 10 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 TJ = 175C 100 40 60 80 100 120 140 160 180 200 10 9.0 TJ = 175C 8.0 SQUARE WAVE 7.0 dc 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient Figure 10. Power Dissipation http://onsemi.com 4 180 9.0 10 MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR860 1000 100 IR, REVERSE CURRENT ( A) 70 50 TJ = 150C 20 100C 25C 10 100C 1.0 25C 0.1 0.01 100 7.0 300 200 600 500 400 VR, REVERSE VOLTAGE (VOLTS) 5.0 Figure 12. Typical Reverse Current* * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.4 0.8 0.6 1.2 1.0 1.8 RJA = 16C/W RJA = 60C/W (NO HEAT SINK) SQUARE WAVE dc 3.0 2.0 SQUARE WAVE 1.0 0 0 20 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 150 160 180 170 Figure 13. Current Derating, Case 7.0 4.0 RATED VR APPLIED 8.0 Figure 11. Typical Forward Voltage dc 5.0 9.0 TC, CASE TEMPERATURE (C) 8.0 6.0 10 vF, INSTANTANEOUS VOLTAGE (VOLTS) 10 9.0 1.6 1.4 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0.1 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 10 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 TJ = 150C 100 40 60 80 100 120 140 160 180 200 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 SQUARE WAVE dc TJ = 175C 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 14. Current Derating, Ambient Figure 15. Power Dissipation http://onsemi.com 5 9.0 10 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 0.05 t1 SINGLE PULSE 0.02 0.01 0.01 ZJC(t) = r(t) RJC RJC = 1.5 C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 P(pk) t2 DUTY CYCLE, D = t1/t2 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 TJ(pk) - TC = P(pk) ZJC(t) 50 t, TIME (ms) Figure 16. Thermal Response 1000 C, CAPACITANCE (pF) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR840, MUR860 MUR820 TJ = 25C 300 100 30 10 1.0 10 VR, REVERSE VOLTAGE (VOLTS) Figure 17. Typical Capacitance http://onsemi.com 6 100 100 200 500 1000 MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 PACKAGE DIMENSIONS TO-220 TWO-LEAD CASE 221B-04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F S T DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J http://onsemi.com 7 INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 8 MUR820/D