3
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Round Conductor Flat Cable
1 mm 28 AWG Stranded, Halogen Free PO HF625 Series
• Low Smoke Zero Halogen (LSZH). Insulation Advantages of
LSZH insulation are the low smoke (IEC 61034-2:2005), and low
toxicity of combustion gases (NF X 70-100-2:2006), reducing the
risk to reghters, and reducing the soot and corrosion damage to
nearby equipment
• Broad operating temperature range from -40°C to 105°C
• 28 AWG stranded conductors on 1mm pitch permits mass
terminations to a broad line of metric IDC connectors
• Zippable for branching or discrete terminations
• See the Regulatory Information Appendix (RIA) in the “RoHS
compliance” section of www.3Mconnector.com for compliance
information (RIA E1 & C1 apply)
Date Modified: December 3, 2010 TS-2338-B
Sheet 1 of 2
Physical
Insulation:
Material: Halogen Free Polyolen (PO)
Color: Dark Gray
Marking:
Standard: None
Conductors: 28 AWG, 7 × 36 AWG [ 7 × Ø 0.127 ] Tinned Stranded Copper
Electrical
Voltage Rating: USA: 300V Canada: 150V EU: <50V
Insulation Resistance: > 1 × 1010 Ω/3 m [ 10 ft ]
Characteristic Impedance: Unbalanced Balanced
85 Ω 144 Ω
Capacitance: 60.5 pF/m [ 18.44 pF/ft ] 33.8 pF/m [ 10.29 pF/ft ]
Inductance: 0.43 μH/m [ 0.13 μH/ft ] 0.69 μH/m [ 0.21 μH/ft ]
Propagation Delay: 5.15 ns/m [ 1.57 ns/ft ] 4.86 ns/m [ 1.48 ns/ft ]
Velocity of Propagation: 65% 69%
Note: Unbalanced is measured between ground-signal-ground conductors.Balanced is measured between conductors within a pair.
Environmental
Temperature Rating: -40°C to +105°C
Flammability Rating: UL: Horizontal
UL File No.: E42769, Style No.: 21682 Halogen Free is defined as both 1) no halogen compounds that are intentionally added to the product or
used in the manufacturing process for the product and 2) any impurities present are less than 900 ppm
bromine, less than 900 ppm chlorine and/or less than 1500ppm total bromine and chlorine. The latter
are the levels set forth in certain industry standards for printed circuit boards, such as the International
Electrotechnical Commission (IEC) 61249-2-21 standard. This information represents 3M's knowledge
and belief which may be based in whole or in part on information provided by 3rd party suppliers to 3M.