Amphenol Aerospace 38999 III HD Dualok II I SJT Series III TV Series II JT Fiber Optics 22, 22D, 22M Pin Connectors 22, 22D, 22M Socket Series I, III 22D Socket Series II eMI Filter Transient 20 Pin and Socket 8 Twinax Center Pin and Socket 8 Twinax Intermediate Outer Pin & Socket 26482 Matrix 2 Matrix|Pyle 83723 III Pyle 26500 5015 Crimp Rear Release Matrix Class L 22992 BackShells Options Others 122 Series I LJT SJT All crimping tools included are the "full cycling" type and when used as specified in the installation instructions L-624 covering the TV, CTV and MS series connectors, will provide reliable crimped wire to contact terminations. There is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. CRIMPING TOOLS Contact Size/Type 12 Pin and Socket 16 Pin and Socket HIgH SPeeD Cables Application Tools The following data includes information pertaining to the application tools which have been established for crimping, inserting, and removing contacts incorporated in the TV, CTV and MILDTL-38999 Series III connectors. For additional information on coax, twinax and triax contact tools, see High Speed Contact section of this catalog. Accessories Aquacon Herm/Seal PCB Contacts 38999, Series I LJT, II JT, III TV, & SJT Crimping Tool M22520/1-01 M22520/1-01 M22520/7-01 Turret Die or Positioner M22520/1-04 M22520/1-04 M22520/7-04 M22520/1-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/1-04 M22520/2-10 M22520/7-08 M22520/2-09 M22520/7-07 M22520/2-07 M22520/7-05 M22520/2-06 M22520/7-06 M22520/2-37 M22520/5-01 M22520/5-200 Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. The above crimping tools and positioners are available from the approved tool manufacturer. Contact Size/Type 8 Coaxial Inner Pin and Socket 8 Coaxial Outer Pin and Socket Crimping Tool M22520/2-01 M22520/5-01 M22520/5-05 Die Closure B M22520/5-01 M22520/2-01 M22520/5-41 Die Closure B M22520/10-07 Die Closure B M22520/2-35 M22520/4-01 M22520/4-02 M22520/2-01 M22520/2-34 M22520/31-01 M22520/31-02 M22520/10-01 16 Coaxial Inner Pin and Socket 16 Coaxial Outer Pin and Socket 12 Coaxial Inner Pin and Socket 12 Coaxial Outer Pin and Socket 10 (Power) Turret Die or Positioner M22520/2-31 TP-201423 INSERTION TOOLS Plastic Tools Use with Contact Size MS Part Number Color 10 (Power M81969/14-05* Gray / (White) 12 M81969/14-04* Yellow / (White) 16 M81969/14-03* Blue / (White) 20 M81969/14-10* Red / (Orange) 22 M81969/14-09 Brown/White 22D, 22M M81969/14-01* Green / (White) 8 Coaxial 8 Twinax None Metal Tools Angle Type Straight Type MS Part No. Commercial Part No. Commercial Part No. M81969/8-11 M81969/8-09 11-8674-12 11-8794-12 M81969/8-07 11-8674-16 11-8794-16 M81969/8-05 11-8674-20 11-8794-20 M81969/8-03 11-8674-22 11-8794-22 M81969/8-01 11-8674-24 11-8794-24 None Required None None Color Green Yellow Blue Red Brown Black Red REMOVAL TOOLS Plastic Tools Use with Contact Size 10 (Power) 12 16 20 22 22D, 22M 8 Coaxial 8 Twinax MS Part Number M81969/14-05* M81969/14-04* For Unwired Contacts Commercial Part No. Color (Gray) / White (Yellow) / White 11-10050-11 Metal Tools Angle Type Straight Type Commercial Commercial MS Part No. Part No. Part No. M81969/8-12 M81969/8-10 11-8675-12 11-8795-12 Color Green / White Yellow / White M81969/14-03* M81969/14-10* M81969/14-09* M81969/14-01* M81969/14-12 M81969/14-12 (Blue) / White (Orange) / Red (Brown)/White (Green) / White Green Green M81969/8-08 M81969/8-06 M81969/8-04 M81969/8-02 None None Blue / White Red / Orange Brown/White Green / White N/A N/A 11-10050-10 11-10050-9 11-10050-8 11-10050-7 None None 11-8675-16 11-8675-20 11-8675-22 11-8675-24 11-9170 11-9170 11-8795-16 11-8795-20 11-8795-22 11-8795-24 DRK264-8 N/A For information about contacts see page 18. The M81969/8, 11-8674, 11-8675, and 11-8794 metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as follows: Contact size 12: dia. is .155, size 16: dia. is .109, size 20: dia. is .077, size 22D: dia. is .050. When wire diameters exceed those specified, the plastic tools must be used. To be determined. Contact Daniels Manufacturing Co. or Astro Tool Corp. * Double end insertion/removal tool. for availability. ** Twinax insertion tools are available only in a straight type, metal version. Daniels Manufacturing Co. part number Contact Amphenol Aerospace for more information at 800-678-0141 * www.amphenol-aerospace.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Amphenol: M81969/14-03