ALUMINUM ELECTROLYTIC CAPACITORS BC Chip Type , High Temperature Range, Vibration Resistance series Highly dependable reliability withstanding load life of 1000 hours at +150C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2002/95/EC). BC High Temperature UE Specifications Item Performance Characteristics Category Temperature Range - 40 to +150C ( 8 to 10), - 55 to +150C ( 12.5 to 18) Rated Voltage Range 10 to 50V Rated Capacitance Range 33 to 3300F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (A), whichever is greater. Rated voltage (V) 8 tan Tangent of loss angle (tan ) * 10 12.5 to 18 (MAX.) 10 16 25 35 50 0.26 0.20 0.16 0.14 0.14 0.22 0.18 0.16 0.14 0.12 120Hz 20C For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Rated voltage (V) 8 Stability at Low Temperature Impedance ratio Z- 40C / Z+20C * 10 10 16 25 35 50 10 8 6 4 4 8 6 4 4 12.5 to 18 (MAX.) 4 The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 150C. Endurance 120Hz Within 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Shelf Life After storing the capacitors under no load at 150C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Chip Type Type numbering system (Example : 10V 220F) (8 to 10) B0.2 D0.5 3 4 5 6 7 8 9 Package code Capacitance Tolerance (20%) Rated capacitance (220F) NS (mm) D A 0.2 B 0.2 A 0.2 nichicon 100 F BC 50V H1015 D 0.5 L1.0 Series Capacitance C 0.2 0.3MAX. Lot N0. Code Series name Type 0.5MAX. Plastic platform E Trade mark D 8 to 18 Rated voltage (10V) (12.5 to 18) Voltage GS MS ZD Size code H Pressure relief vent Taping Taping Tray Configuration L1.0 Capacitance 10 11 12 13 14 8 to 10 12.5 to 18 12.5 to 18 A0.2 A2 220A BC C0.2 2 A0.2 0.3 MAX. Series Trade mark 1 UBC 1 A 2 2 1 M NS 1 GS E Lot N0. 0.5 MAX. Plastic platform Voltage( A : 10V ) 8 10 12.5 16 18 A 2.9 3.2 4.8 5.4 6.4 B 8.3 10.3 13.6 17.1 19.1 C 8.3 10.3 13.6 17.1 19.1 E 3.1 4.5 4.0 6.3 6.3 H 1.1 to 1.5 1.1 to 1.5 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 H Pressure relief vent Aid electrode Dimensions 10 1A V Cap.(F) 33 47 100 220 330 470 680 1000 2200 3300 Code 330 470 101 221 331 471 681 102 222 332 16 1C 8 x 10 110 10 x 10 150 25 1E 35 1V 50 1H 8 x 10 70 8 x 10 80 10 x 10 100 8 x 10 110 8 x 10 110 10 x 10 120 12.5 x 13.5 420 10 x 10 150 10 x 10 150 12.5 x 13.5 550 16 x 16.5 550 12.5 x 13.5 650 12.5 x 13.5 650 16 x 21.5 650 12.5 x 13.5 750 12.5 x 13.5 700 16 x 16.5 750 16 x 21.5 850 800 12.5 x 13.5 800 16 x 16.5 800 16 x 21.5 950 18 x 21.5 1100 12.5 x 13.5 900 16 x 16.5 850 16 x 21.5 1000 18 x 21.5 1150 18 x 21.5 18 x 21.5 1350 1400 18 x 21.5 1350 Case size D x L (mm) Rated ripple 12.5 x 13.5 Rated ripple current (mArms) at 150C 100kHz Frequency coefficient of rated ripple current Frequency Coefficient 120 Hz 0.67 300 Hz 0.79 1 kHz 0.91 10kHz or more 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100B