Data sheet W-Series WPE 120/150 Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Klippon(R) Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon(R) Connect provides a proven response to a range of different requirements. General ordering data Type Order No. Version GTIN (EAN) Qty. WPE 120/150 1019700000 PE terminal, Screw connection, 120 mm, 14400 A (120 mm), green / yellow 4008190495671 10 pc(s). Creation date November 6, 2018 2:45:16 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1 Data sheet W-Series WPE 120/150 Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width Height Depth Depth including DIN rail 32 mm 132 mm 117 mm 125.5 mm Width (inches) Height (inches) Depth (inches) Net weight 1.26 inch 5.197 inch 4.606 inch 579.85 g -60 C Continuous operating temp., max. 130 C Wemid V-0 Colour green / yellow DEMKO14ATEX1338U 150 mm For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D Certificate No. (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 150 mm Screw connection, With PE connection, closed Tightening torque (mounting screw) Temperatures Continuous operating temp., min. Environmental Product Compliance REACH SVHC Lead 7439-92-1 Material data Material UL 94 flammability rating Rating data IECEx/ATEX Certificate No. (ATEX) Wire cross section max. (ATEX) Operating temperature range Ex 2014/34/EU label Ex eb II C Gb System specifications Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function 10...20 Nm 1 2 No TS 35 Yes End cover plate required 3...6 Nm Number of levels Number of potentials per tier PE connection N-function PEN function No 1 1 Yes No Yes Yes for screw fixing closed Installation advice Number of similar terminals Type of mounting Screwed 1 Screwed 12400-382 2 AWG Wire cross section max. (CSA) 250 kcmil Additional technical data Explosion-tested version Interlock Open sides CSA rating data Certificate No. (CSA) Wire cross section min. (CSA) Creation date November 6, 2018 2:45:16 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2 Data sheet W-Series WPE 120/150 Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection) Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Type of connection Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. S6 (DIN 6911) 33.62 mm 150 mm on side 2 20 Nm Screw connection 150 mm 50 mm Clamping range, max. 150 mm Clamping screw M 10 Connection cross-section, stranded, min. 35 mm Gauge to IEC 60947-1 B13 Stripping length 35 mm Tightening torque, min. 10 Nm Wire connection cross section, finely stranded, max. 150 mm Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 35 mm Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 35 mm 35 mm Dimensions TS 35 offset 32 mm PE rating data Rated short-time current 14400 A (120 mm) Tightening torque range for fixing screw 3.0...6.0 Nm Centre screw on PE terminals PEN function M6 Yes Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity 1,000 V Rating data Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal 120 mm IEC 60947-7-2 8 kV 0.12 m 3 UL rating data Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 2 AWG Conductor size Field wiring min. (UR) 2 AWG Conductor size Factory wiring max. (UR) 250 kcmil Conductor size Field wiring max. (UR) 250 kcmil Classifications ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1 EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-41 27-14-11-41 ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0 EC000491 EC000901 27-14-03-05 27-14-03-05 27-14-11-41 Product information Descriptive text technical data Instructions for accessories For 50 - 150 mm, the TS 35 x 15 (copper, 2.3 mm thick) mounting rail should be used. Rail support protective insulation for installation of mounting rail "SH 2" order No. 0494920000 (QTY 10). Creation date November 6, 2018 2:45:16 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3 Data sheet W-Series WPE 120/150 Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data IECEXULD14.0005U_e.pdf DE_PT1002_20160414_249_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Safety note Safety notice Safety Information Creation date November 6, 2018 2:45:16 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4 Data sheet W-Series WPE 120/150 Drawings Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 6, 2018 2:45:16 PM CET Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5