Data sheet
W-Series
WPE 120/150
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date November 6, 2018 2:45:16 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3
Conductors for clamping (rated connection)
Blade size S6 (DIN 6911) Clamping range, max. 150 mm²
Clamping range, min. 33.62 mm² Clamping screw M 10
Connection cross-section, stranded,
max. 150 mm²
Connection cross-section, stranded, min.
35 mm²
Connection direction on side Gauge to IEC 60947-1 B13
Number of connections 2 Stripping length 35 mm
Tightening torque, max. 20 Nm Tightening torque, min. 10 Nm
Type of connection
Screw connection
Wire connection cross section, finely
stranded, max. 150 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/1, max. 150 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/1, min. 35 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max. 50 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min. 35 mm²
Wire connection cross-section, finely
stranded, min. 35 mm²
Dimensions
TS 35 offset 32 mm
PE rating data
Rated short-time current 14400 A (120 mm²) Centre screw on PE terminals M 6
Tightening torque range for fixing screw 3.0...6.0 Nm PEN function Yes
Rating data
Rated cross-section 120 mm² Rated voltage to adjoining terminal 1,000 V
Standards
IEC 60947-7-2
Volume resistance according to IEC
60947-7-x 0.12 mΩ
Rated impulse withstand voltage to
adjacent terminal 8 kV
Pollution severity
3
UL rating data
Certificate No. (UR) E60693 Conductor size Factory wiring max. (UR) 250 kcmil
Conductor size Factory wiring min. (UR) 2 AWG Conductor size Field wiring max. (UR) 250 kcmil
Conductor size Field wiring min. (UR) 2 AWG
Classifications
ETIM 3.0 EC000901 ETIM 4.0 EC000491
ETIM 5.0 EC000491 ETIM 6.0 EC000901
UNSPSC 30-21-18-11 eClass 5.1 27-14-03-05
eClass 6.2 27-14-03-05 eClass 7.1 27-14-03-05
eClass 8.1 27-14-11-41 eClass 9.0 27-14-11-41
eClass 9.1 27-14-11-41
Product information
Descriptive text technical data For 50 - 150 mm², the TS 35 x 15 (copper, 2.3 mm thick) mounting rail should be used.
Instructions for accessories Rail support protective insulation for installation of mounting rail "SH 2" order No. 0494920000 (QTY 10).