INDEPENDENT LINEARITY: ±0.5%
END VOLTAGE: 0.5% MAX.
ROTATIONAL OPERATING LIFE: 100 x 10 REVOLUTIONS MIN.
6
OPERATING TEMP. RANGE: -65°C To +125°C
VOLTAGE RESOLUTION: VIRTUALLY INFINITE
OUTPUT SMOOTHNESS: 0.1% MAX.
RESISTANCE TEMP. COEFFICIENT: 400PPM/°C MAX.
SOLDER TERMINALS: GOLD PLATED BRASS
SCHEMATIC DIAGRAM
CW
1
2
3
VIEWED FROM SHAFT END
ELECTRICAL CONTACTS: MULTI-FINGER PRECIOUS METAL
RESISTANCE ELEMENT: CO-MOLDED CONDUCTIVE PLASTIC
SHAFT AND BALL BEARINGS: STAINLESS STEEL
HOUSING AND COVER: ANODIZED ALUMINUM
POWER RATING @ 70°C: 2 WATTS MAX.
WIPER CONTACT CURRENT: 10 MilliAmps MAX.
DIELECTRIC STRENGTH: 1000 VRMS @ 60Hz
INSULATION RESISTANCE: 100 MegΩ MIN. @ 500VDC
RESISTANCE: 1kΩ to 10kΩ ±10%
ACTIVE ELECTRICAL ANGLE: 340°
ELECTRICAL CONTINUITY ANGLE: 344° MIN.
MECHANICAL ROTATION: CONTINUOUS
STARTING TORQUE: 0.30 Oz.-In. MAX.
RUNNING TORQUE: 0.20 Oz.-In. MAX.
TOTAL WEIGHT (1-GANG): 2.0 Oz. MAX.
PILOT RUNOUT: 0.001 In. TIR
SHAFT RUNOUT: 0.001 In. TIR
SHAFT END PLAY: 0.003 MAX.
SHAFT RADIAL PLAY: 0.001 In. TIR
LATERAL RUNOUT: 0.002 In. TIR
1-7/16 In. Dia. Servo Mount
PRECISION POSITION
ELECTRICAL CHARACTERISTICS
STANDARD MODEL
MECHANICAL CHARACTERISTICS
STANDARD MODEL
ENVIRONMENTAL CHARACTERISTICS
STANDARD
MATERIALS OF CONSTRUCTION
STANDARD
ACCORDANCE WITH MIL-PRF-39023
6015 SERIES
ALL OTHER GENERAL REQUIREMENTS IN
STANDARD PRODUCT OFFERING
SENSORS
MS PART NUMBER RESISTANCE
6015-1000-030 1KΩ ±10%
6015-1002-030 5KΩ ±10%
6015-1003-030 10KΩ ±10%
20°
2
20°
3
MAX..915
1
.062.005
.093.005
.072.005
MAX.
1.312
1.3115
1.3125
.390
.032
.005
1.437
.2494
.2498
.625
.010
.750
MAX.
Position Sensor Products 424 Crown Point Circle, Grass Valley, CA 95945 8-7-13
precisionsensors.meas-spec.com Ph: 530.273.4608 Fax: 530.273.0769 www.meas-spec.com
ROTATIONAL OPERATING LIFE: 100 x 10 REVOLUTIONS MIN.
6
OPERATING TEMP. RANGE: -65°C To +125°C
LATERAL RUNOUT: 0.002 In. TIR
INDEPENDENT LINEARITY: ±0.5%
END VOLTAGE: 0.5% MAX.
SOLDER TERMINALS: GOLD PLATED BRASS
ELECTRICAL CONTACTS: MULTI-FINGER PRECIOUS METAL
RESISTANCE ELEMENT: CO-MOLDED CONDUCTIVE PLASTIC
SHAFT AND BALL BEARINGS: STAINLESS STEEL
HOUSING AND COVER: ANODIZED ALUMINUM
VOLTAGE RESOLUTION: VIRTUALLY INFINITE
OUTPUT SMOOTHNESS: 0.1% MAX.
RESISTANCE TEMP. COEFFICIENT: 400PPM/°C MAX.
POWER RATING @ 70°C: 2 WATTS MAX.
WIPER CONTACT CURRENT: 10 MilliAmps MAX.
DIELECTRIC STRENGTH: 1000 VRMS @ 60Hz
INSULATION RESISTANCE: 100 MegΩ MIN. @ 500VDC
SPECIAL SHAFT LENGTHS AND FEATURES SUCH AS
REAR EXTENSIONS, FLATS, SLOTS, AND STEPS.
SPECIAL TORQUE OR DETENT REQUIREMENTS
SPECIAL MOUNTING DIMENSIONS OR FEATURES
INCLUDING ANTI-ROTATION PINS, BOLT FLANGES,
AND THREADED HOLES.
ROTATIONAL STOPS LIMITING SHAFT TRAVEL.
ANCILLIARY DEVICES SUCH AS SPRING RETURNS,
CLUTCHES, BRAKES, AND SWITCHES.
SPECIAL ENVIRONMENTAL CAPABILITES SUCH
AS MOISTURE SEALS, HIGH SHOCK AND
VIBRATION.
CUSTOM RESISTANCE VALUES (500Ω TO 60kΩ)
AND TOLERANCES AS LOW AS ±5%
SPECIAL LINEARITIES AS LOW AS 0.075%, ABSOLUTE
(INDEXED) OR INDEPENDENT OVER SPECIFIED
REGION.
ADDITIONAL TAPS, CURRENT OR VOLTAGE
CURRENT LIMIT RESISTORS AND OTHER INTERNAL
CIRCUIT COMPONENTS (CAPS, DIODES, ETC.)
SPECIAL ELECTRICAL ANGLES UP TO 355° MAX.
WIRE LEADS OR CABLE IN PLACE OF TERMINALS
SPECIAL TRANSFER FUNCTIONS:
NON-LINEAR OUTPUTS
LOAD COMPENSATION
TRIG, LOG, AND EXPONENTIAL OUTPUTS
MULTI-GANG CONSTRUCTION (UP TO 6) ON A
COMMON SHAFT OR CONCENTRIC SHAFTING
(ADD .320 LENGTH PER GANG).
RESISTANCES (±10%): 1KΩ, 5KΩ, and 10kΩ
ACTIVE ELECTRICAL ANGLE: 340°
ELECTRICAL CONTINUITY ANGLE: 344° MIN.
MECHANICAL ROTATION: CONTINUOUS
STARTING TORQUE: 0.30 Oz.-In. MAX.
RUNNING TORQUE: 0.20 Oz.-In. MAX.
TOTAL WEIGHT (1-GANG): 1.6 Oz. MAX.
PILOT RUNOUT: 0.001 In. TIR
SHAFT RUNOUT: 0.001 In. TIR
SHAFT END PLAY: 0.003 MAX.
SHAFT RADIAL PLAY: 0.001 In. TIR
ELECTRICAL CHARACTERISTICS
STANDARD
MECHANICAL CHARACTERISTICS
STANDARD
ENVIRONMENTAL CHARACTERISTICS
STANDARD
MATERIALS OF CONSTRUCTION
AVAILABLE OPTIONS
STANDARD
IN ACCORDANCE WITH MIL-PRF-39023
ALL OTHER GENERAL REQUIREMENTS
SENSORS
6015 SERIES
1-7/16 In. Dia. Servo Mount
PRECISION POSITION
STAINLESS STEEL
WELDED MULTI-FINGER
PRECIOUS METAL CONTACTS
HOUSING
ALUMINUM PRECISION SHAFT
STAINLESS STEEL
INSULATOR
SHAFT
ANODIZED
BALL BEARINGS
PRECISION
RESISTANCE ELEMENT
CO-MOLDED
SOLDER TERMINALS
TURRET-STYLE
ANODIZED
ALUMINUM
COVER
Position Sensor Products 424 Crown Point Circle, Grass Valley, CA 95945 8-7-13
precisionsensors.meas-spec.com Ph: 530.273.4608 Fax: 530.273.0769 www.meas-spec.com
