PD -95037B IRF7103PbF l l l l l l l l Adavanced Process Technology Ultra Low On-Resistance Dual N-Channel MOSFET Surface Mount Available in Tape & Reel Dynamic dv/dt Rating Fast Switching Lead-Free HEXFET(R) Power MOSFET S1 1 8 D1 G1 2 7 D1 S2 3 6 D2 G2 4 5 D2 VDSS = 50V RDS(on) = 0.130 ID = 3.0A Top View Description The SO-8 has been modified through a customized leadframe for enhanced thermal characteristics and dual-die capability making it ideal in a variety of power applications. With these improvements, multiple devices can be used in an application with dramatically reduced board space. The package is designed for vapor phase, infra red, or wave soldering techniques. Power dissipation of greater than 0.8W is possible in a typical PCB mount application. SO-8 Absolute Maximum Ratings Parameter ID @ TA = 25C ID @ TA = 70C IDM PD @TA = 25C VGS dv/dt TJ, TSTG Max. Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Peak Diode Recovery dv/dt Junction and Storage Temperature Range Units 3.0 2.3 10 2.0 0.016 20 4.5 -55 to + 150 A W W/C V V/nS C Thermal Resistance Ratings Parameter RJA Maximum Junction-to-Ambient Min. Typ. Max. 62.5 Units C/W 02/09/10 IRF7103PbF Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)DSS/TJ Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Qg Q gs Qgd td(on) tr td(off) tf Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Min. 50 1.0 Typ. 0.049 0.11 0.16 3.8 12 1.2 3.5 9.0 8.0 45 25 RDS(ON) Static Drain-to-Source On-Resistance VGS(th) g fs Gate Threshold Voltage Forward Transconductance IDSS Drain-to-Source Leakage Current LD Internal Drain Inductance 4.0 LS Internal Source Inductance 6.0 Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance 290 140 37 V(BR)DSS IGSS Max. Units Conditions V VGS = 0V, ID = 250A V/C Reference to 25C, ID = 1mA 0.13 VGS = 10V, ID = 3.0A 0.20 VGS = 4.5V, ID = 1.5A 3.0 V VDS = VGS, ID = 250A S VDS = 15V, ID = 3.0A 2.0 VDS = 40V, VGS = 0V A 25 VDS = 40V, VGS = 0V, T J = 55 C 100 VGS = 20V nA -100 VGS = - 20V 30 ID = 2.0A nC VDS = 25V VGS = 10V 20 VDD = 25V 20 ID = 1.0A ns 70 RG = 6.0 50 RD = 25 D nH pF Between lead,6mm(0.25in.) from package and center of die contact VGS = 0V VDS = 25V = 1.0MHz G Source-Drain Ratings and Characteristics IS I SM V SD t rr Q rr ton Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Forward Turn-On Time Min. Typ. Max. Units Conditions D MOSFET symbol 2.0 showing the A G integral reverse 12 p-n junction diode. S 1.2 V TJ = 25C, IS = 1.5A, V GS = 0V 70 100 ns TJ = 25C, IF = 1.5A 110 170 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes: Repetitive rating; pulse width limited by Pulse width 300s; duty cycle 2%. ISD 1.8A, di/dt 90A/s, VDD V(BR)DSS, Surface mounted on FR-4 board, t 10sec. max. junction temperature. TJ 150C S IRF7103PbF C, IRF7103PbF IRF7103PbF V DS VGS RD D.U.T. RG + - VDD 10V Pulse Width 1 s Duty Factor 0.1 % Fig 10a. Switching Time Test Circuit VDS 90% TA, Ambient Temperature (C) 10% VGS Fig 9. Maximum Drain Current Vs. Ambient Temperature td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms Thermal Response (Z thJA ) 100 D = 0.50 0.20 10 0.10 0.05 0.02 1 0.1 0.0001 PDM 0.01 t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJA + TA 0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient 100 IRF7103PbF Current Regulator Same Type as D.U.T. QG 10V QGS 50K .2F 12V .3F QGD VG D.U.T. + V - DS VGS 3mA Charge IG ID Current Sampling Resistors Fig 12a. Basic Gate Charge Waveform Fig 12b. Gate Charge Test Circuit IRF7103PbF Peak Diode Recovery dv/dt Test Circuit + D.U.T Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer + - - + RG * * * * Driver Gate Drive P.W. + dv/dt controlled by R G Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test Period D= - VDD P.W. Period VGS=10V D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt Re-Applied Voltage Body Diode VDD Forward Drop Inductor Curent Ripple 5% * VGS = 5V for Logic Level Devices Fig 13. For N-Channel HEXFETS ISD * IRF7103PbF SO-8 Package Outline(Mosfet & Fetky) Dimensions are shown in milimeters (inches) ' ,1&+(6 0,1 0$; $ $ E F ' ( H %$6,& H %$6,& + . / \ ',0 % $ + >@ ( $ ; H H ;E >@ $ 0,//,0(7(56 0,1 0$; %$6,& %$6,& .[ & $ \ >@ ;F ;/ & $ % )22735,17 ;>@ 127(6 ',0(16,21,1* 72/(5$1&,1*3(5$60(<0 &21752//,1*',0(16,210,//,0(7(5 ',0(16,216$5(6+2:1,10,//,0(7(56>,1&+(6@ 287/,1(&21)250672-('(&287/,1(06$$ ',0(16,21'2(6127,1&/8'(02/'3527586,216 02/'3527586,21612772(;&(('>@ ',0(16,21'2(6127,1&/8'(02/'3527586,216 02/'3527586,21612772(;&(('>@ ',0(16,21,67+(/(1*7+2)/($')2562/'(5,1*72 $68%675$7( >@ ;>@ SO-8 Part Marking Information (;$03/(7+,6,6$1,5) 026)(7 ,17(51$7,21$/ 5(&7,),(5 /2*2 ;;;; ) ;>@ '$7(&2'( <:: 3 ',6*1$7(6/($')5(( 352'8&7 237,21$/ < /$67',*,72)7+(<($5 :: :((. $ $66(0%/<6,7(&2'( /27&2'( 3$57180%(5 Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ IRF7103PbF SO-8 Tape and Reel (Dimensions are shown in milimeters (inches)) TERMINAL NUMBER 1 12.3 ( .484 ) 11.7 ( .461 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES: 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 330.00 (12.992) MAX. 14.40 ( .566 ) 12.40 ( .488 ) NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.02/2010