CPH3427 Ordering number : ENN7917 N-Channel Silicon MOSFET CPH3427 General-Purpose Switching Device Applications Features * * * Low ON-resistance. Ultrahigh-speed switching. 4V drive. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 100 Gate-to-Source Voltage VGSS 20 V 1 A Drain Current (DC) ID Drain Current (Pulse) IDP PD Allowable Power Dissipation V PW10s, duty cycle1% 4 A Mounted on a ceramic board (900mm20.8mm) 1 W Channel Temperature Tch 150 C Storage Temperature Tstg --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current V(BR)DSS IDSS IGSS Conditions ID=1mA, VGS=0 VDS=100V, VGS=0 VGS(off) yfs VGS=16V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=0.5A RDS(on)1 RDS(on)2 ID=0.5A, VGS=10V ID=0.5A, VGS=4V Input Capacitance Ciss Output Capacitance Coss VDS=20V, f=1MHz VDS=20V, f=1MHz Reverse Transfer Capacitance Crss Turn-ON Delay Time td(on) tr Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Rise Time Turn-OFF Delay Time Fall Time td(off) tf Ratings min typ Unit max 100 V 1 A 10 A 2.6 V 480 630 m 580 810 m 1.2 0.7 1.4 S 240 pF 20 pF VDS=20V, f=1MHz See specified Test Circuit. 12 pF 8 ns See specified Test Circuit. 3 ns See specified Test Circuit. 30 ns See specified Test Circuit. 11 ns Marking : ZC Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 93004 TS IM TA-100216 No.7917-1/4 CPH3427 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Total Gate Charge Qg VDS=50V, VGS=10V, ID=1A 6.5 nC Gate-to-Source Charge Qgs VDS=50V, VGS=10V, ID=1A 1.1 nC Gate-to-Drain "Miller" Charge Qgd VDS=50V, VGS=10V, ID=1A 1.1 Diode Forward Voltage VSD IS=1A, VGS=0 Package Dimensions unit : mm 2152A 2.9 VDD=50V ID=0.5A RL=100 0.6 VIN 0.05 1.6 2.8 D VOUT PW=10s D.C.1% 0.6 2 V 10V 0V 0.2 0.15 0.4 1 1.2 Switching Time Test Circuit VIN 3 nC 0.82 G 1.9 0.7 0.9 0.2 1 : Gate 2 : Source 3 : Drain CPH3427 P.G 50 S SANYO : CPH3 ID -- VDS 3.0 4.0 V 2.5V 1.2 0.8 0.6 25 C 0.4 0.2 0.2 VGS=2.0V 0 0 0.2 0.6 0.4 0.8 1.0 1.2 1.4 Drain-to-Source Voltage, VDS -- V 0 Ta=25C ID=0.5A 800 700 600 500 400 300 2 4 6 8 10 12 14 1.0 16 Gate-to-Source Voltage, VGS -- V 18 20 IT07447 1.5 2.0 2.5 3.0 3.5 Gate-to-Source Voltage, VGS -- V 4.0 IT07446 RDS(on) -- Ta 1000 900 0 0.5 IT07445 Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 0 1.6 RDS(on) -- VGS 1000 --25C 1.0 C 0.4 1.4 Ta=7 5 Drain Current, ID -- A V 3.5 0.6 VDS=10V 1.8 1.6 6.0 10.0 V V Drain Current, ID -- A 0.8 ID -- VGS 2.0 V 1.0 900 800 V =4 S 700 ,VG 0V .5A 600 =0 ID 500 V =1 GS 60 80 A, .5 =0 ID 400 300 200 --60 --40 --20 0 20 40 100 Ambient Temperature, Ta -- C 120 140 160 IT07448 No.7917-2/4 CPH3427 yfs -- ID 3 VDS=10V 2 1.0 = Ta 5 75 C 3 7 5 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 0.01 0.3 5 0.7 0.8 0.9 f=1MHz Ciss 3 2 Ciss, Coss, Crss -- pF tf td(on) 7 5 tr 1.0 IT07450 5 2 3 0.6 Ciss, Coss, Crss -- VDS 7 td(off) 10 0.5 Diode Forward Voltage, VSD -- V VDD=50V VGS=10V 5 3 0.4 IT07449 SW Time -- ID 7 Switching Time, SW Time -- ns 0.1 3 2 Drain Current, ID -- A 100 7 5 3 Coss 2 2 Crss 10 7 5 1.0 2 0.1 3 5 7 2 1.0 Drain Current, ID -- A 3 0 7 5 3 2 Drain Current, ID -- A 8 6 4 2 1.0 7 5 1 2 3 4 5 6 Total Gate Charge, Qg -- nC 7 IT07453 PD -- Ta 1.2 15 20 25 30 0.1 7 5 3 2 0.01 7 5 IT07452 ASO <10s IDP=4A ID=1A 10 1m 0 s s DC 3 2 3 2 0 10 Drain-to-Source Voltage, VDS -- V VDS=50V ID=1A 0 5 IT07451 VGS -- Qg 10 Gate-to-Source Voltage, VGS -- V 2 C 5 --2 3 25 C 7 C 25 C --2 5 1.0 7 5 Ta= 75 C 2 0.1 0.01 Allowable Power Dissipation, PD -- W IF -- VSD VGS=0 3 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S 5 10 m 10 op 0m er s s ati on (T a= 25 C ) Operation in this area is limited by RDS(on). Ta=25C Single pulse Mounted on a ceramic board (900mm20.8mm) 0.001 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 2 IT07454 Drain-to-Source Voltage, VDS -- V 1.0 M ou nt 0.8 ed on ac er am ic 0.6 bo ar d( 90 0.4 0m m2 0.8 m 0.2 m ) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT07455 No.7917-3/4 CPH3427 Note on usage : Since the CPH3427 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2004. Specifications and information herein are subject to change without notice. PS No.7917-4/4