DRAWN
APPROVED
CHECKED
DATE
08/09/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED H.SMITH 01/10/2015
SHT
1
DRAWING NO:
203M9XX
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
W.RUST
08/09/2015
K.SHEPPARD 08/09/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
HEAT SHRINK BOOT BACKSHELL
TE CONN E C TIVITY - P O LA M C O LT D RE SE RV ES TH E RIGH T TO AM E ND TH IS D R AW IN G
AN D T HE INF OR M AT IO N S ET FO R TH HE RE ON AT ANY T IM E . USERS SH OU LD
IN D E P EN DE NTLY E VAL UA TE TH E SU ITA B IL ITY OF THE PRODU C T FOR TH EIR AP PLIC ATION.
DRAWING REV:
L
MIL-DTL-26482 SERIES I
REVISIONS
LTR
REVISED PER ECO-15-013980
DESCRIPTION DATE APPROVED
K
LREVISED PER ECO-18-008680
01/10/15 H.SMITH
SERIES
SHELL SIZE (TABLE 1)
MATERIAL
REFER TO CH00-0250-004
FINISH
REFER TO CH00-0250-004
MODIFICATION CODE
REFER TO CH00-0250-004 2
203M916-19B-D
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANETLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-203M912-19B).
4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER'S OPTION.
5. BACKSHELL MATES TO MIL-C-26482 SERIES I, CLASS E, F, MS3110, MS3111 AND MS3116 CONNECTORS.
6. ANTI-ROTATIONAL SET SCREW, THREE #4-40 THREADED HOLES 120° APART, SINGLE
MATING SET SCREW SUPPLIED.
CODE 21 - HEAT SHRINK BOOT BACKSHELL
ANTI-ROTATIONAL
SET SCREW
6
06/04/18O. CANO
XXXX
DRAWN
APPROVED
CHECKED
DATE
08/09/2015
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED H.SMITH 01/10/2015
SHT
2
DRAWING NO:
203M9XX
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
W.RUST
08/09/2015
K.SHEPPARD 08/09/2015
TE CAGE CODE: 06090
POLAMCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
HEAT SHRINK BOOT BACKSHELL
TE CONN E C TIVITY - P O LA M C O LT D RE SE RV ES TH E RIGH T TO AM E ND TH IS D R AW IN G
AN D T HE INF OR M AT IO N S ET FO R TH HE RE ON AT ANY T IM E . USERS SH OU LD
IN D E P EN DE NTLY E VAL UA TE TH E SU ITA B IL ITY OF THE PRODU C T FOR TH EIR AP PLIC ATION.
DRAWING REV:
L
MIL-DTL-26482 SERIES I
REVISIONS
LTR
REVISED PER ECO-15-013980
DESCRIPTION DATE APPROVED
K
LREVISED PER ECO-18-008680
01/10/15 H.SMITH
A THREAD
ØB
BASE PART
NUMBER
SHELL SIZE
5
A
THREAD
ØB
MAX
X
+0,20/-0,00 ØZ ØY
MAX
203M908 08 7/16-28UNEF 18,05 1,12 7,15 13,50
203M910 10 9/16-24UNEF 21,55 1,12 9,80 15,50
203M912 12 11/16-24UNEF 24,65 1,12 13,50 19,50
203M914 14 13/16-20UNEF 27,65 1,12 15,90 21,50
203M916 16 15/16-20UNEF 31,05 1,12 19,00 24,50
203M918 18 1 1/16-18UNEF 34,35 1,12 21,40 26,50
203M920 20 1 3/16-18UNEF 37,55 1,75 24,60 31,00
203M922 22 1 5/16-18UNEF 40,55 1,75 27,80 34,50
203M924 24 1 7/16-18UNEF 43,55 1,75 31,00 36,50
PART MARK
HERE
10,50
3,50
28,00
4 DRAIN HOLES
WHEN 'D' MODIFICATION
IS SPECIFIED
ØZ
ØY
X
SILICONE O-RING
ANTI-ROTATIONAL
SET SCREW
MEDIUM DIAMOND
KNURL
TABLE 1
06/04/18O. CANO
