EMC1103 SST Compliant Hardware Monitor with Three Temperature Channels PRODUCT FEATURES Data Brief General Description The EMC1103 is a one-wire sensor that is capable of monitoring up to three temperature zones for an Intel PC platform containing an SST host. The three temperature zones consist of an internal temperature diode and two externally connected temperature diodes. In cooperation with a host device, thermal management and fan control can be performed. Communication takes place over a one-wire SST based interface. The internal 11-bit deltasigma ADC architecture provides superb linearity, high accuracy, and excellent noise immunity. Applications -- -- -- -- 0.125C resolution 1C Accuracy (50C to 70C) Diode Fault Reporting Second External Diode configured to read a discrete diode. Internal Temperature Monitor -- Range -40C to +125C -- 0.125C resolution -- 2C Accuracy (40C to 70C) Desktop PCs, Servers and Workstations Resistance Error Correction Ideality Configuration Beta Compensation Two External Temperature Monitors Supply -- 3.0V to 3.6V Features Single Wire Interface (SST based) -- -- -- -- SST 1.0 compliant Fixed Address, Discoverable Device Nine programmable addresses Supports FCS Abort functionality not available in SST 0.9 compliant devices Simplified Block Diagram EMC1103 Switching Current Configuration Register Analog Mux and Anti-Alias Filter DP1 DN1 DP2 DN2 11-bit delta-sigma ADC External 2 Temp Register Digital Mux and Byte Interlock Internal Temp Register SST One-Wire Interface External 1 Temp Register ADD1 ADD0 Internal Temp Diode Status Register SMSC EMC1103 PRODUCT PREVIEW SST Revision 2.7 (07-15-08) SST Compliant Hardware Monitor with Three Temperature Channels ORDER NUMBER(S): PART NUMBER FEATURES PACKAGE EMC1103-AIZL-TR External Diode 1 configured to monitor 65nm CPU External Diode 2 configured to monitor 2N3904 10 pin MSOP Lead-Free ROHS Compliant External Diode 1 configured to monitor 2N3904 External Diode 2 configured to monitor 2N3904 10 pin MSOP Lead-Free ROHS Compliant EMC1103-1-AIZL-TR 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright (c) 2008 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation ("SMSC"). Product names and company names are the trademarks of their respective holders. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Revision 2.7 (07-15-08) 2 PRODUCT PREVIEW SMSC EMC1103 REVISIO N HISTORY D PIN 1 IDENTIFIER AREA (D/2 X E1/2) e E1 3 4 2 R E VISION 5 3 D ESC R IPTION A c IN ITIA L RELEASE D ATE R ELE AS ED BY 3/29/05 S.K .ILIEV 4 E SEE DETAIL "A" 3 PRODUCT PREVIEW 10X b END VIEW TOP VIEW A2 A C SEATING PLANE A1 ccc C 3-D VIEW SIDE VIEW H C GAU GE PLANE 0.25 NO TES: 1. ALL DIM ENSIONS ARE IN MILLIM ETER. 2. TOLERANCE ON THE TRUE POSITION OF EACH LEAD IS 0.04 m m AT M AXIMUM MATERIAL CONDITION. 3. PA CKAGE BODY DIM ENSIONS "D" AND "E1" DO NOT INCLUDE MOLD/INTERLEAD PROTRUSIONS OR FLASH. M AX IM UM M OLD PROTRUSIONS OR FLASH IS 0.15 m m (0.006 INCHES) PER END AND SIDE. DIM ENSIONS "D" AND "E1" ARE DE TERMINED AT THE OUTERMOS T EXTREMES OF THE PLASTIC B ODY, INCLUDING ANY MISMATCH BETWEEN TOP AND BOTTOM PLASTIC B ODY. THEY ARE DE TERMINED AT DATUM PLA NE "H". 4. DIMENSIONS "b" A ND "c" APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.08 mm AND 0.15 m m FROM THE LEAD TIP. 5. DETAILS OF THE PIN 1 IDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED W ITHIN THE ZONE INDICA TED. SEATING PLANE 0 - 8 L (0.95) DETAIL "A" U N LES S O TH ER W ISE SPECIFIED D IM EN S IO NS A RE IN MILLIMETERS AN D TO LERANCES ARE: D EC IMAL X.X 0.1 X.XX 0.05 X.X XX 0.025 THIRD A NGLE P ROJE CT ION 80 A R KAY DRIVE H AU P PAU G E, N Y 11788 U SA A N G U LAR 1 TITLE NAME D IM AN D TO L P ER A SM E Y14.5M - 1994 M A TE RIAL F IN ISH - SMSC EMC1103 P RIN T W ITH "S C ALE TO FIT" D O N O T S C ALE DRAW ING PACKAGE O UTLINE 10 PIN TSSO P, 3x3 MM BODY, 0.50 M M PITCH DATE DRAWN S.K.ILIEV 3/29/05 C HECKED S.K.ILIEV D WG NUM BER S.K.ILIEV SCALE 3/29/05 Figure 1 EMC1103 10-Pin MSOP Package Drawing REV MO-10-TSSOP-3x3 3/29/05 A PPR OVED S TD C OM PLIANCE 1:1 JEDEC: MO -187 A SHEET 1 OF 1 SST Compliant Hardware Monitor with Three Temperature Channels Revision 2.7 (07-15-08) Package Outline Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microchip: EMC1103-1-AIZL-TR EMC1103-AIZL-TR