SMT Inductors SIMID 1210 - High Current B82422-H****-+100 Data Book Supplement Vakatseite (( 2 )) SMT Inductors SIMID 1210 - High Current B82422-H****-+100 SIMID 1210/3225 (inch/mm) Rated inductance 1 bis 100 H Rated current 90 mA bis 650 mA Construction Horizontal ferrite core Winding laser-welded, flame-retardant encapsulation Temperature index of wire enamel: 180C Features Very high current handling capability Suitable for reflow (IR and vapor phase) and wave soldering Different measuring frequency for L and Q Applications Filtering of supply voltages, coupling, decoupling DC/DC converters Automotive electonics Telecommunications Terminals Tinned Base material CuSn6; 0,4 m Cu; 1-2 m Ag; 5-7 m Sn Suitable for soldering and conductive adhesion No leaching during wave soldering Marking Marking on component: Manufacturer, date of manufacture (coded), L value (in nH) and tolerance of L-value tolerance (coded) H" for high-current version Minimum marking on reel: Manufacturer, part number, ordering code L value and tolerance of L value, quantity, date of packing Delivery mode 8 mm blister tape wound on 180 mm and 330 mm For details on taping, packing and packing units see at EMC data book 1996 page 433. Siemens Matsushita Components 1.99 3 SMT Inductors SIMID 1210 - High Current B82422-H****-+100 Dimensional drawing Size: 1210/3225 (inch/mm) approx. weight 50 mg Marking 1) PCB layout recommendation Dimensions (mm) A B C D Wave soldering 2,3 1,60 2,1 5,3 Reflow soldering 2,7 1,15 2,1 4,4 1) Soldering area, tinned 4 1.99 Siemens Matsushita Components SMT Inductors SIMID 1210 - High Current B82422-H****-+100 Characteristics and ordering codes For further technical data see page 7. LR H 1,0 1,5 2,2 3,3 4,7 6,8 10 15 22 33 47 68 100 fL MHz 10 % 1 = K 1 1 1 1 1 1 0,1 0,1 0,1 0,1 0,1 0,1 Tolerance Qmin 10 10 10 10 10 10 15 15 15 15 15 15 15 Siemens Matsushita Components fQ MHz 7,96 7,96 7,96 7,96 7,96 7,96 2,52 2,52 2,52 2,52 2,52 2,52 2,52 IR mA 650 600 560 500 430 380 300 260 220 180 140 110 90 1.99 Rmax 0,22 0,27 0,33 0,42 0,48 0,75 1,20 1,50 2,40 3,30 4,70 7,70 11,5 fres, min MHz 200 120 85 60 46 38 30 26 22 17 14 9 7 Ordering code B82422-H1102-K100 B82422-H1152-K100 B82422-H1222-K100 B82422-H1332-K100 B82422-H1472-K100 B82422-H1682-K100 B82422-H1103-K100 B82422-H1153-K100 B82422-H1223-K100 B82422-H1333-K100 B82422-H1473-K100 B82422-H1683-K100 B82422-H1104-K100 5 SMT Inductors SIMID 1210 - High Current B82422-H****-+100 Impedance |Z | versus frequency f measured with impedance analyzer HP 4194A SSB1381-Z 10 5 |Z | 10 Inductance L versus dc load IDC measured with LCR meter HP 4275A H L 4 100 H 10 3 10 2 100 H 10 2 10 H 10 1 10 H 1 H 10 0 1 H 10 1 10 -1 10 0 10 -2 10 -1 3 10 10 4 10 5 kHz f 10 -3 10 -2 10 6 SSB1383-G 100 10 -1 10 0 A 10 1 Current derating Iop/IR versus ambient temperature TA (Rated temperature TR = 85C) Q factor versus frequency f measured with impedance analyzer HP 4194A Q SSB1382-8 10 3 SSB1279-H 1,2 Iop B 90 IR N 80 70 1,0 0,8 60 0,6 50 40 30 100 H 0,4 1 H 20 0,2 10 0 2 10 6 10 H 10 3 10 4 0 10 5 kHz 10 6 f 1.99 0 20 40 60 80 100 C 140 TA Siemens Matsushita Components SMT Inductors SIMID 1210 - High Current B82422-H****-+100 General technical data Rated inductance L R Measured at frequency fL, with impedance analyzer HP 4194A Q factor Qmin Measured at frequency fQ, with impedance analyzer HP 4194A Rated current IR Maximum permissible dc with an inductance decrease of L /L 0 10 % and a temperature increase of 40 K at rated temperature TR = 85C (see derating kurve) Self-resonance frequency fres, min Measured with network analyzer HP 8783D DC resistance R max Measured at 20C ambient temperature, measuring current < IR Climatic category 55/125/56 (- 55C/+ 125C/56 days damp heat test) in accordance with IEC 68-1 Solderability (215 3)C, (3 0,3) s wetting of soldering area: 90 % Resistance to soldering heat 260C, 10 s in accordance with IEC 68-2-20, test Tb Permissible PCB bending 2 mm (100 mm long standard PCB) Siemens Matsushita Components 1.99 7 SMT Inductors SIMID 1210 - High Current B82422-H****-+100 Published by Siemens Matsushita Components GmbH & Co. KG Marketing Kommunikation, Postfach 80 17 09, D-81617 Munchen Siemens Matsushita Components 1999. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of Siemens AG, Passive Components and Electron Tubes Group, in the Federal Republic of Germany or the international Siemens Companies and Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 8 1.99 Siemens Matsushita Components