PD - 90555E POWER MOSFET THRU-HOLE (TO-254AA) Product Summary IRFM240 JANTX2N7219 JANTXV2N7219 REF:MIL-PRF-19500/596 200V, N-CHANNEL (R) HEXFET MOSFET TECHNOLOGY Part Number RDS(on) ID IRFM240 0.18 18A HEXFET(R) MOSFET technology is the key to International Rectifier's advanced line of power MOSFET transistors. The efficient geometry design achieves very low on-state resistance combined with high transconductance. HEXFET transistors also feature all of the well-established advantages of MOSFETs, such as voltage control, very fast switching, ease of paralleling and electrical parameter temperature stability. They are well-suited for applications such as switching power supplies, motor controls, inverters, choppers, audio amplifiers, high energy pulse circuits, and virtually any application where high reliability is required. The HEXFET transistor's totally isolated package eliminates the need for additional isolating material between the device and the heatsink. This improves thermal efficiency and reduces drain capacitance. TO-254AA Features: n n n n n n Simple Drive Requirements Ease of Paralleling Hermetically Sealed Electrically Isolated Dynamic dv/dt Rating Light-weight Absolute Maximum Ratings Parameter ID @ VGS = 10V, TC = 25C ID @ VGS = 10V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction Storage Temperature Range Lead Temperature Weight Units 18 11 72 125 1.0 20 450 18 12.5 5.0 -55 to 150 A W W/C V mJ A mJ V/ns o C 300 ( 0.063 in.(1.6mm) from case for 10s) 9.3 (Typical) g For footnotes refer to the last page www.irf.com 1 04/20/07 IRFM240 Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified) BVDSS Parameter Min Drain-to-Source Breakdown Voltage 200 -- -- V -- 0.29 -- V/C -- -- 2.0 6.1 -- -- -- -- -- -- -- -- 0.18 0.25 4.0 -- 25 250 BV DSS /T J Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current Typ Max Units IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4.0 100 -100 60 14.6 37.6 20 105 58 67 -- Ciss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance -- -- -- 1300 400 130 -- -- -- V S A nA nC ns nH pF Test Conditions VGS = 0V, ID = 1.0mA Reference to 25C, ID = 1.0mA VGS = 10V, ID = 11A VGS = 10V, ID = 18A VDS = VGS, ID = 250A VDS > 15V, IDS = 11A VDS= 160V ,VGS=0V VDS = 160V, VGS = 0V, TJ = 125C VGS = 20V VGS = -20V VGS =10V, ID = 18A VDS = 100V VDD = 100V, ID = 18A, VGS =10V, RG = 9.1 Measured from drain lead (6mm/ 0.25in. from package) to source lead (6mm/0.25in. from package) VGS = 0V, VDS = 25V f = 1.0MHz Source-Drain Diode Ratings and Characteristics Parameter Min Typ Max Units IS ISM VSD trr Q RR Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge ton Forward Turn-On Time -- -- -- -- -- -- -- -- -- -- 18 72 1.5 500 5.3 Test Conditions A V ns C Tj = 25C, IS = 18A, VGS = 0V Tj = 25C, IF = 18A, di/dt 100A/s VDD 50V Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. Thermal Resistance Parameter Min Typ Max RthJC RthJS Junction-to-Case Case-to-sink -- -- -- 0.21 1.0 -- RthJA Junction-to-Ambient -- -- 48 Units Test Conditions C/W Typical socket mount Note: Corresponding Spice and Saber models are available on the International Rectifier Website. For footnotes refer to the last page 2 www.irf.com IRFM240 Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRFM240 13a & b Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 7. Typical Source-Drain Diode Forward Voltage 4 Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 8. Maximum Safe Operating Area www.irf.com IRFM240 V DS VGS RG RD D.U.T. + -V DD V GS Pulse Width 1 s Duty Factor 0.1 % Fig 10a. Switching Time Test Circuit VDS 90% Fig 9. Maximum Drain Current Vs. Case Temperature 10% VGS td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRFM240 15V L VDS D.U.T. RG V 20V GS IAS DRIVER + - VDD A 0.01 tp Fig 12a. Unclamped Inductive Test Circuit V(BR)DSS tp Fig 12c. Maximum Avalanche Energy Vs. Drain Current I AS Current Regulator Same Type as D.U.T. Fig 12b. Unclamped Inductive Waveforms 50K QG 12V 0 .2F .3F 10 V QGS QGD + V - DS VGS VG 3mA Charge Fig 13a. Basic Gate Charge Waveform 6 D.U.T. IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit www.irf.com IRFM240 Footnotes: ISD 18A, di/dt 150A/s, Repetitive Rating; Pulse width limited by VDD 200V, TJ 150C maximum junction temperature. VDD = 50V, starting TJ = 25C, L= 1.3mH Peak IL = 18A, VGS = 10V Pulse width 300 s; Duty Cycle 2% Case Outline and Dimensions -- TO-254AA 0.12 [.005] 13.84 [.545] 13.59 [.535] 3.78 [.149] 3.53 [.139] 6.60 [.260] 6.32 [.249] A 20.32 [.800] 20.07 [.790] 17.40 [.685] 16.89 [.665] 1 C 2 2X >@ >@ >@ 0$; 1.14 [.045] 0.89 [.035] 0.36 [.014] 3.81 [.150] B A 127(6 1. 2. 3. 4. B 3 3X 3.81 [.150] 13.84 [.545] 13.59 [.535] 1.27 [.050] 1.02 [.040] DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES]. CONTROLLING DIMENSION: INCH. CONFORMS TO JEDEC OUTLINE TO-254AA. PIN ASSIGNMENTS 1 = DRAIN 2 = SOURCE 3 = GATE CAUTION BERYLLIA WARNING PER MIL-PRF-19500 Package containing beryllia shall not be ground, sandblasted, machined, or have other operations performed on them which will produce beryllia or beryllium dust. Furthermore, beryllium oxide packages shall not be placed in acids that will produce fumes containing beryllium. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 04/2007 www.irf.com 7