DUAL-IN-LINE SOCKETS
Standard Solder Tail
Open Frame
www.mill-max.com 516-922-6000
14
Series 111
Total number
of pins
Quantity
per tube
A B C
For High
Temperature
Insulators
Add ‘100’
To End Of
Part Numbers
SPECIFY PLATING CODE XX= 13 91 93 99
Sleeve (Pin)
Ordering Information
Contact (Clip)
•All DIP sockets accept
.015 - .025” dia. and
standard IC leads.
•Lubricated contacts also
available. (See page 96
for specs.)
•Hi-Rel, 4-finger BeCu
#30 clip rated at 3 amps.
See page 208 for details.
• Uses Mill-Max #1001
pin. See page 134
for details.
10µ” Au 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb
30µ” Au 10µ” Au 30µ” Au 200µ” Sn/Pb
XX= Plating Code
See Below
Replace
‘001’ suffix
with ‘361’ for
Lubricated
contacts
(To be used with
“99” plating
code only)
10 0.5 0.2 0.3 40 110-XX-210-41-001
4 0.2 0.3 0.4 102 110-XX-304-41-001
6 0.3 0.3 0.4 67 110-XX-306-41-001
8 0.4 0.3 0.4 50 110-XX-308-41-001
10 0.5 0.3 0.4 40 110-XX-310-41-001
14 0.7 0.3 0.4 28 110-XX-314-41-001
16 0.8 0.3 0.4 25 110-XX-316-41-001
18 0.9 0.3 0.4 22 110-XX-318-41-001
20 1.0 0.3 0.4 20 110-XX-320-41-001
22 1.1 0.3 0.4 18 110-XX-322-41-001
24 1.2 0.3 0.4 16 110-XX-324-41-001
28 1.4 0.3 0.4 14 110-XX-328-41-001
20 1.0 0.4 0.5 20 110-XX-420-41-001
22 1.1 0.4 0.5 18 110-XX-422-41-001
24 1.2 0.4 0.5 16 110-XX-424-41-001
28 1.4 0.4 0.5 14 110-XX-428-41-001
32 1.6 0.4 0.5 12 110-XX-432-41-001
24 1.2 0.6 0.7 16 110-XX-624-41-001
28 1.4 0.6 0.7 14 110-XX-628-41-001
32 1.6 0.6 0.7 12 110-XX-632-41-001
36 1.8 0.6 0.7 11 110-XX-636-41-001
40 2.0 0.6 0.7 10 110-XX-640-41-001
42 2.1 0.6 0.7 9 110-XX-642-41-001
48 2.4 0.6 0.7 8 110-XX-648-41-001
50 2.5 0.6 0.7 8 110-XX-650-41-001
52 2.6 0.6 0.7 7 110-XX-652-41-001
50 2.5 0.9 1.0 8 110-XX-950-41-001
52 2.6 0.9 1.0 7 110-XX-952-41-001
64 3.2 0.9 1.0 6 110-XX-964-41-001
