1.6X0.8mm SMD CHIP LED LAMP (0.25mm Height) Part Number: APG1608ZGC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The Green source color devices are made with InGaN Features on Sapphire Light Emitting Diode. z 1.6mmX0.8mm SMT LED, 0.25mm thickness. Static electricity and surge damage the LEDS. z Low power consumption. It is recommended to use a wrist band or anti-electrostatic z Wide viewing angle. glove when handling the LEDs. z Compatible with automatic placement equipment. All devices, equipment and machinery must be electrically z Ideal for backlight and indicator. grounded. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Applications 1.Mobile phone Keypad indicator and backlight. 2.Flat backlight for LCD, switch and symbol. 3.Toys. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI3327 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: DEC/22/2010 DRAWN: Y.H.Wu PAGE: 1 OF 5 ERP: 1203007884 Selection Guide Part No. Dice APG1608ZGC Lens Type Green (InGaN) Water Clear Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 280 500 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAI3327 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: DEC/22/2010 DRAWN: Y.H.Wu PAGE: 2 OF 5 ERP: 1203007884 Green SPEC NO: DSAI3327 APPROVED: WYNEC APG1608ZGC REV NO: V.4 CHECKED: Allen Liu DATE: DEC/22/2010 DRAWN: Y.H.Wu PAGE: 3 OF 5 ERP: 1203007884 APG1608ZGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAI3327 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: DEC/22/2010 DRAWN: Y.H.Wu PAGE: 4 OF 5 ERP: 1203007884 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAI3327 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu APG1608ZGC DATE: DEC/22/2010 DRAWN: Y.H.Wu PAGE: 5 OF 5 ERP: 1203007884