Silizium-PIN-Fotodiode Silicon PIN Photodiode Lead (Pb) Free Product - RoHS Compliant BPX 65 Wesentliche Merkmale Features * Wellenlangenbereich (S10%) 350nm bis 1100nm * Kurze Schaltzeit (typ. 12 ns) * Hermetisch dichte Metallbauform (TO-18), geeignet bis 125 oC * Wavelength range (S10%) 350 nm to 1100 nm * Short switching time (typ. 12 ns) * Hermetically sealed metal can package (TO-18), suitable up to 125 oC Anwendungen Applications * Schneller optischer Empfanger * Industrieelektronik * Messen/Steuern/Regeln" * High speed photo detector * Industrial electronics * For control and drive ciruits Typ Type Bestellnummer Ordering Code Fotostrom, Ev=1000 lx, standard light A, VR = 5 V Photocurrent Ip (A) BPX 65 Q62702P0027 10 (5.5) 2011-10-20 1 BPX 65 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 125 C Sperrspannung Reverse voltage VR VR (t < 2 min) 20 50 V V Verlustleistung, TA = 25 oC Total power dissipation Ptot 250 mW Kennwerte (TA = 25 C, Normlicht A, T = 2856 K) Characteristics (TA = 25 C, standard light A, T = 2856 K) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Fotoempfindlichkeit, VR = 5 V Spectral sensitivity S 10 (5.5) nA/Ix Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 850 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 350 ... 1100 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 1.00 mm2 Abmessung der bestrahlungsempfindlichen Flache Dimensions of radiant sensitive area LxB 1x1 mm Halbwinkel Half angle 40 Grad deg. IR 1 ( 5) nA Spektrale Fotoempfindlichkeit, = 850 nm Spectral sensitivity S 0.55 A/W Quantenausbeute, = 850 nm Quantum yield 0.80 Electrons Photon Leerlaufspannung, Ev = 1000 Ix Open-circuit voltage VO 320 ( 270) mV Dunkelstrom Dark current VR = 20 V 2011-10-20 LxW 2 BPX 65 Kennwerte (TA = 25 C, Normlicht A, T = 2856 K) Characteristics (TA = 25 C, standard light A, T = 2856 K) (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Kurzschlussstrom, Ev = 1000 Ix Short-circuit current ISC 10 A Anstiegs und Abfallzeit des Fotostroms Rise and fall time of the photocurrent RL= 50 ; VR = 5 V; = 850 nm tr , tf 12 ns Durchlassspannung, IF = 100 mA, E = 0 Forward voltage VF 1.3 V Kapazitat, VR = 0 V, f = 1 MHz, E = 0 Capacitance C0 11 pF Temperaturkoeffizient von VL Temperature coefficient of VL TCV - 2.6 mV/K Temperaturkoeffizient von IK Temperature coefficient of IK TCI 0.2 %/K Rauschaquivalente Strahlungsleistung Noise equivalent power VR = 20 V, = 850 nm NEP 3.3 x 10-14 Nachweisgrenze, VR = 20 V, = 850 nm Detection limit D* 3.1 x 1012 2011-10-20 3 W -----------Hz cm x Hz -------------------------W BPX 65 Relative Spectral Sensitivity Srel = f () Photocurrent IP = f (Ev), VR = 5 V Open-Circuit-Voltage VL = f (Ev) Total Power Dissipation Ptot = f (TA) Dark Current IR = f (VR), E = 0 Capacitance C = f (VR), f = 1 MHz, E = 0 IR = f (TA), VR = 20 V, E = 0 Directional Characteristics Srel = f () 2011-10-20 4 Dark Current BPX 65 Mazeichnung Package Outlines 2.54 (0.100) spacing o0.45 (0.018) Chip position o4.8 (0.189) o4.6 (0.181) (2.7 (0.106)) ) 43 ) 35 Anode = SFH 482 ( 1 (0.0 Cathode = SFH 402, BPX 65 . 1 9 (package) 0. 0 0. 1. 1 0. 9 (0 (0 .0 .0 welded ) ) o5.6 (0.220) o5.3 (0.209) glass lens 5.3 (0.209) 5.0 (0.197) 14.5 (0.571) 5.5 (0.216) 12.5 (0.492) 5.0 (0.197) GETY6013 Mae in mm (inch) / Dimensions in mm (inch). 2011-10-20 43 35 5 BPX 65 Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 s 250 t Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-9305 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2011-10-20 6