ADC20013 950-2050 MHz DBS Tuner IC Data Sheet - Rev 2.11 Features * * * * * * * * * * Monolithic DBS Tuner IC On Chip Oscillator 6 dB Noise Figure 11 dB Conversion Gain Single + 5V Supply Small Size Low Cost High Reliability Surface Mount Package RoHS Compliant package Option S3 Package Modified 16 Pin SOIC Product Description The ANADIGICS DBS (Direct Broadcast Satellite) Tuner IC is intended for use in high volume, low cost manufacturing of compact DBS tuners for satellite receivers and integrated satellite ready TV/VTR receivers. The ADC20013 Tuner IC provides DBS tuner V manufacturers the ability to produce, in high volumes, tuners with low component count, minimal tuning, small size, high reliability and exceptional priceperformance ratios. The ADC20013 offers a high degree of functionality in a very small and user friendly configuration. DD IF rF LO OSC Figure 1: Functional Block Diagram 08/2007 ADC20013 Figure 2: Pinout Table 1: Pin Description 2 PIn nAMe DeSCrIPtIOn PIn nAMe DeSCrIPtIOn 1 GND Ground 16 GND Ground 2 IFOUT IF Output 15 VDD_OSC Oscillator Supply 3 VDD_MIX Mixer Supply 14 OSC OUT Oscillator Output to PLL 4 GND Ground 13 GND Ground 5 GND Ground 12 GND Ground 6 RFIN RF Input 11 LOTANK LO Tank Circuit 7 GND Ground 10 GND Ground 8 GND Ground 9 GND Ground Data Sheet - Rev 2.11 08/2007 ADC20013 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings ParaMeter MIn MaX unIt VDD/VIF 0 +7 VDC VLO -5 +0.5 VDC VRF -10 +0.5 VDC VOSC -5 +0.5 VDC Storage Temperature -55 +100 C Input Power RF +10 dBm Input Power LO +17 dBm Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges ParaMeter Frequency VDD Case Temperature RF LO IF MIn tYP MaX unIt 950 1430 - 480 2050 2530 - MHz MHz MHz - +5 - VDC -55 - +85 C O The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Data Sheet - Rev 2.11 08/2007 3 ADC20013 Table 4: Electrical Specifications (TA = 25 oC; VDD = + 5V) ParaMeter MIn tYP MaX unIt Conversion Gain(6) 6 11 - dB SSB Noise Figure(6) - 6.5 11 dB Third Order IMD(4) (-20 dBm Tones, 5 MHz Apart) - - 40 -35 dBc Second Order IMD (-20 dBm Input Level) - - 25 - 20 dBc - - 30 0 - 25 3 dBm dBm LO Output Level for PLL( 3) -8 -4 - dBm Tuning Voltage (1) (VT) 1 - 20 Volts VCO Phase Noise(5) 10 kHz Offset 100 kHz Offset - - 70 - 100 - 65 - 95 dBc/Hz dBc/Hz Input Impedance(7) - - - - Output Impedance(7) - - - - Power Supply Current - 60 85 mA LO Leakage RF Port IF Port (1),(2) Notes: (1) Measured in ANADIGICS test fixture with Toshiba 1SV186 off-chip-varactor. (2) Includes external coupling through test fixture. (3) Oscillator output for external PLL. (Pin 14) (4) Measured at 1450 and 1750 MHz. (5) Measured using PLL (LBW =1 KHz, Reference = 1.25 MHz, Step Size = 10 MHz). (6) Measured in ANADIGICS test setup. (7) See Smith charts. 4 Data Sheet - Rev 2.11 08/2007 ADC20013 Figure 3: Test Circuit Data Sheet - Rev 2.11 08/2007 5 ADC20013 PERFORMANCE DATA Figure 4: Conversion Gain and Noise Figure vs Frequency Figure 5: Oscillator Tuning Curve Figure 6: Third Order IMD RF Input Power Level -20dBm/Tone 6 Figure 7: VCO Phase Noise Data Sheet - Rev 2.11 08/2007 ADC20013 INPUT IMPEDANCE DATA (RF) 1. IMPEDANCE REFERENCE AT PIN 6 2. VCO ON Vt = 3.20 VOLTS 3. Vdd = + 5 VOLTS 4. USE EXTERNAL BIAS TEE FOR IF 1 .5 5 5 .2 0.950 GHz 8.40 - 61.53 j 2 1.250 GHz 8.12 -34.53 j 3 1.550 GHz 10.13 - 19.90 j 4 1.750 GHz 12.75 - 8.70 j 5. 1.900 GHz 15.23 - 3.03 j 6. 2.050 GHz 16.33 - 0.27 j 2 .2 0 1 -Bp 6 .5 1 2 5 4 3 -.2 -5 2 +Bp 1 -2 -.5 -1 MEASURED IN 50 SYSTEM Figure 8: Input Impedance Data (RF) OUTPUT IMPEDANCE DATA (IF) 1. IMPEDANCE REFERENCE AT PIN 2 2. VCO ON Vt = 3.20 VOLTS 3. Vdd = + 5 VOLTS 4. USE EXTERNAL BIAS TEE FOR IF 1 .5 5 .2 0.40 GHz 26.8 - 82.8 j 2 0.48 GHz 22.2 - 70.0 j 3 0.50 GHz 21.4 - 67.5 j 4 0.60 GHz 18.1 - 56.2 j 5. 0.70 GHz 15.9 - 48.7 j 6. 0.80 GHz 14 - 41.2 j 2 .2 0 1 .5 1 2 - Bp 5 +Bp -5 -.2 6 5 4 32 1 -.5 -2 -1 MEASURED IN 50 SYSTEM Figure 9: Output Impedance Data (IF) Data Sheet - Rev 2.11 08/2007 7 ADC20013 1 500.0 MHz - 60.83 - 169.80 j 1. IMPEDANCE REFERENCE AT PIN 11 2. Vdd = + 5 VOLTS 1 2 1000.0 MHz -15.15 -54.41 j .5 2 .2 3 1430.0 MHz - 5.71 - 24.62 j 6 5 -.17 0 .2 .5 1 2 -5.8 5 4 1700.0 MHz - 2.80 - 12.02 j 4 -.2 3 5. 1922.0 MHz - 2.83 - 4.25 j -2 2 -.5 -1 MEASURED IN 50 6. 2768.0 MHz 0.54 -11.31 j SYSTEM Figure 10: LO Impedance Data 1012 1011 1010 MTF (hrs) 109 108 107 106 105 104 103 102 300 280 260 240 220 200 180 160 140 120 100 Tcase (0 C) JC ~ 600 C/W Figure 11: MTF vs. Tcase 8 Data Sheet - Rev 2.11 08/2007 80 60 ADC20013 PACKAGE OUTLINE Figure 12: S3 Package Outline - Modified 16 Pin SOIC Data Sheet - Rev 2.11 08/2007 9 ADC20013 NOTES 10 Data Sheet - Rev 2.11 08/2007 ADC20013 NOTES Data Sheet - Rev 2.11 08/2007 11 ADC20013 Ordering Information OrDer nuMBer teMPerature rAnGe PACKAGe DeSCrIPtIOn ADC20013S3CTR -55 oC to +85 oC Modified 16 Pin SOIC Tape and Reel, 3500 pieces per Reel ADC20013RS3P1 -55 oC to +85 oC RoHS Compliant Modified 16 Pin SOIC Tape and Reel, 3500 pieces per Reel COMPOnent PACKAGInG ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. warning ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. Data Sheet - Rev 2.11 08/2007 12