08/2007
S3 Package
950-2050 MHz DBS Tuner IC
Data Sheet - Rev 2.11
FEATURES
• Monolithic DBS Tuner IC
• On Chip Oscillator
• 6 dB Noise Figure
• 11 dB Conversion Gain
• Single + 5V Supply
• Small Size
• Low Cost
• High Reliability
• Surface Mount Package
• RoHS Compliant package Option
The ANADIGICS DBS (Direct Broadcast Satellite)
Tuner IC is intended for use in high volume, low cost
manufacturing of compact DBS tuners for satellite
receivers and integrated satellite ready TV/VTR
receivers.
The ADC20013 Tuner IC provides DBS tuner
manufacturers the ability to produce, in high volumes,
tuners with low component count, minimal tuning,
small size, high reliability and exceptional price-
performance ratios. The ADC20013 offers a high
degree of functionality in a very small and user friendly
conguration.
RF
DD
V
2Data Sheet - Rev 2.11
08/2007
1GND Ground 16 GND Ground
2IF
OUT
IF Output 15 V
DD_OSC
Oscillator Supply
3 V
DD_MIX
Mixer Supply 14 OSC
OUT
Oscillator Output to PLL
4GND Ground 13 GND Ground
5GND Ground 12 GND Ground
6RF
IN
RF Input 11 LO
TA NK
LO Tank Circuit
7GND Ground 10 GND Ground
8GND Ground 9GND Ground
Data Sheet - Rev 2.11
08/2007
3
PARAMETER MAX
VDD/VIF 0+7 VDC
VLO -5 +0.5 VDC
VRF -10 +0.5 VDC
VOSC -5 +0.5 VDC
Storage Temperature -55 +100 °C
Input Power RF +10 dBm
Input Power LO +17 dBm
PARAMETER TYP MAX
Frequency
RF
LO
IF
950
1430
-
-
-
480
2050
2530
-
MHz
MHz
MHz
V
DD
-+5 -VDC
Case Temperature -55 -+85
O
C
4Data Sheet - Rev 2.11
08/2007
(TAoDD
Notes:
(1) Measured in ANADIGICS test xture with Toshiba 1SV186 off-chip-varactor.
(2) Includes external coupling through test xture.
(3) Oscillator output for external PLL. (Pin 14)
(4) Measured at 1450 and 1750 MHz.
(5) Measured using PLL (LBW =1 KHz, Reference = 1.25 MHz, Step Size = 10 MHz).
(6) Measured in ANADIGICS test setup.
(7) See Smith charts.
PARAMETER TYP MAX
Conversion Gain
(6)
611 -dB
SSB Noise Figure
(6)
-6.5 11 dB
Third Order IMD
(4)
(-20 dBm Tones, 5 MHz Apart) -- 40 -35 dBc
Second Order IMD
(-20 dBm Input Level) -- 25 - 20 dBc
LO Leakage
(1),(2)
RF Port
IF Port
-
-
- 30
0
- 25
3
dBm
dBm
LO Output Level for PLL
( 3)
-8 - 4 -dBm
Tuning Voltage
(1)
(VT) 1 - 20 Volts
VCO Phase Noise
(5)
10 kHz Offset
100 kHz Offset
-
-
- 70
- 100
- 65
- 95
dBc/Hz
dBc/Hz
Input Impedance
(7)
- - - -
Output Impedance
(7)
- - - -
Power Supply Current -60 85 mA
Data Sheet - Rev 2.11
08/2007
5
6Data Sheet - Rev 2.11
08/2007
Data Sheet - Rev 2.11
08/2007
7
INPUT IMPEDANCE DATA (RF)
1. IMPEDANCE REFERENCE AT PIN 6
2. VCO ON Vt = 3.20 VOLTS
3. Vdd = + 5 VOLTS
4. USE EXTERNAL BIAS TEE FOR IF
1 0.950 GHz
8.40
- 61.53 j
2 1.250 GHz
8.12
-34.53 j
3 1.550 GHz
10.13
- 19.90 j
4 1.750 GHz
12.75
- 8.70 j
5. 1.900 GHz
15.23
- 3.03 j
6. 2.050 GHz
16.33
- 0.27 j
-Bp
5
+Bp
-5
-2
1
2
3
-.5
-.2
4
5
6
0 .2 .5 1 2 5
.2
.5
1
2
MEASURED IN 50 SYSTEM
-1
OUTPUT IMPEDANCE DATA (IF)
1. IMPEDANCE REFERENCE AT PIN 2
2. VCO ON Vt = 3.20 VOLTS
3. Vdd = + 5 VOLTS
4. USE EXTERNAL BIAS TEE FOR IF
- Bp
5
2
1
.5
.2
0 .2 .5 1 2 5
-.2
-.5
-1
-2
654 3 21
+Bp
-5
MEASURED IN 50 SYSTEM
1 0.40 GHz
26.8
- 82.8 j
2 0.48 GHz
22.2
- 70.0 j
3 0.50 GHz
21.4
- 67.5 j
4 0.60 GHz
18.1
- 56.2 j
5. 0.70 GHz
15.9
- 48.7 j
6. 0.80 GHz
14
- 41.2 j
8Data Sheet - Rev 2.11
08/2007
1 500.0 MHz
- 60.83
- 169.80
j
2 1000.0 MHz
-15.15
-54.41
j
3 1430.0 MHz
- 5.71
- 24.62
j
4 1700.0 MHz
- 2.80
- 12.02
j
5. 1922.0 MHz
- 2.83
- 4.25
j
6. 2768.0 MHz
0.54
-11.31
j
MEASUREDIN50
SYSTEM
1. IMPEDANCE REFERENCE AT PIN 11
2. Vdd = + 5 VOLTS
-.17 0 .2 .5 1 2 5
6
5
4
3
2
-1
-.5
-.2
.2
.5
1
2
-5.8
-2
10
12
10
11
10
10
10
9
10
8
10
7
10
6
10
5
10
4
10
3
10
2
300 280 260 240 220 200 180 160 140 120 100 80 60
Tcase (
0
C)
MTF (hrs)
JC ~ 600 C/W
Data Sheet - Rev 2.11
08/2007
9
10 Data Sheet - Rev 2.11
08/2007
Data Sheet - Rev 2.11
08/2007
11
Data Sheet - Rev 2.11
08/2007
12
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers
to verify that the information they are using is current before placing orders.
TEMPERATURE
ADC20013S3CTR -55
o
C to +85
o
CModified 16 Pin SOIC Tape and Reel, 3500 pieces per Reel
ADC20013RS3P1 -55
o
C to +85
o
CRoHS Compliant
Modified 16 Pin SOIC Tape and Reel, 3500 pieces per Reel
