Date Code 15,4 0,3 3 -0,1 13,45 -0,1 Ident-Nr. ERNI 244104 4,5 XXXXXXX EE-Zone fur durchkontaktierte Locher o0.60.05 compliant zone for thru hole 2 2 o0.60.05 10 x 2 = 20 8 25 10 x 2 = 15 4x2= 20 11 1 Ebene - Level 3 Ebene - Level 2 11.2 9.7 z a 8.2 Ebene - Level 1 b 8 +0.2 +0.2 +0.2 4.5 0.3 c d 3.7 0.3 e f A P2 1 max. 1 max. B C D 50 max. E P1 F G U 1 H J Bezugsebene Tiefe 13 0.3 Datum plane depth contact layout Bestuckungsplan - K R3 11 10 9 25 24 23 22 21 20 19 18 17 16 15 7 8 6 5 4 3 2 M N z E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E L 1 E E E E E R2 a P Q b R c R1 d S T e 13 0.2 f Lochbild fur Leiterplatte Board hole pattern (Bestuckungsseite) (Component mounting side) 4 10 x 2 = ( 20 ) 4 2 1) all holes +0,05 1) 13 8.3 0.1 o 0,7 0,02 Bohrungsdurchmesser des Loches o 0,7 0,02 Diameter of drilled hole 1 11 z a b c d e f Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 Metal plating of plated-through hole see drawing 114406 Fehlende Masse und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 2 Information: P1 Level 2 siehe Bestuckungsplan/ see contact layout Anforderungsstufe 1 / Consider protection memo from DIN 34 4 x 2 = (8) 16 0.2 0.1 o 0,6 0,05 Diameter of finished plated-through hole durchkontaktiert 15 6.8 o 0,6 0,05 Durchmesser des metallisierten Loches 2 nicht not plated thru 25 14.5 0.2 10 x 2 = ( 20 ) 0.1 alle Locher 5.3 0.1 Tolerances All Dimensions in mm class 1 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date Designation ERmet Messerleiste A ERmet Male Wide Type A www.ERNI.com Index 2:1 Scale H:00055965.SZA 244104 ERM A I