ELST 412 AU GREY - BELDEN WIRE AND CABLE

Product: ELST 412 Au grau

M12 Insert Sensor/Actuator Receptacle Connector: Male, insert with O-ring

and external threads, M12 - mating side, solder contacts - connecting side,

4-pin, A-coded, unshielded, grey body, 230 V AC/DC, 4 A

Product Description

M12 Insert Sensor/Actuator Receptacle Connector: Male, insert with O-ring and external threads, M12 - mating side, solder contacts - connecting side, 4-pin,

A-coded, unshielded, grey body, 230 V AC/DC, 4 A

Technical Drawing

Technical Specifications

Technical Data

Product Family: Sensor / Actuator Connectors

Product Sub Family: M12 Insert

Mating Side: M12

Connecting Side: Solder Contacts

Brand: Hirschmann

Connector Type: Receptacle

Type of Contact / Gender: Male

Connector Design: Insert with O-ring and External Threads

Number of Pins: 4

Coding: A

Attachment Type: Screw-Locking

Rated Voltage: 250 V

Rated Impulse Voltage: 2.5 kV

Operating Voltage: 230 V AC/DC

Rated Current*: 4 A

Contact Resistance: ≤ 10 mOhm

Insulation Resistance: ˃ 10^9 Ohm

Mating Cycles: ≤ 100

Type of Connection: Solder

Suitable Conductor Cross

Section: Solid wires: 0.22 mm² to 0.5 mm² / Standed wires: 0.22 mm² to 0.38 mm²

Ambient Temperature

(Operation)*: - 25 °C - + 90 °C

Protection Degree / IP

Rating**: IP65, IP67, IP68 (1 m / 24 h)

Design Standard: IEC 61076-2-101

Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)

Clearance / Creepage

Distance: DIN EN 60664-1 (2008/01); VDE 0110-1

Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)

Materials

Contact Base Material: CuZn

Contact Plating: Cu/Au

Contact Bearer Material: PA

Contact Bearer Color: Grey

Flammability Class (Contact

Bearer): UL 94 V-2

Potted: no

Attachment Material: PA

O-Ring Material: FKM

Additional Technical Data

Fastening Torque

(Attachment): M 12x1: (50-60) Ncm, hand-tight

Safety & Environmental Compliance

RoHS Compliant: yes

Notes

Note Derating: * Notice derating

Protection Degree / IP

Rating Note: * only if mounted and locked in combination with Hirschmann / Lumberg connector. On the installation side tightness has to be assured by taking proper measures.

Note: The receptacle connector is constructively intended for usage in IP67 and IP68-products. To realise this protection class, the estimated location has to be designed accordingly.

Further details see IEC 61076-2-101. Connection area must be epoxy potted.

Variants

Item # Item Description

931902106 ELST 412 Au grau

Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without

notice, and the listing of such information and specifications does not ensure product availability.

Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages

(including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,

negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.

All sales of Belden products are subject to Belden's standard terms and conditions of sale.

Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief

at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product

Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and

regulations based on their individual usage of the product.