Product data sheet
Characteristics
ZB4BS1420
red Ø40 Emergency switching off pushbutton
head Ø22 latching key release
Main
Range of product Harmony XB4
Product or component type Head for emergency switching off push-button
Device short name ZB4
Bezel material Chromium plated metal
Mounting diameter 22mm
Sale per indivisible quantity 1
Shape of signaling unit head Round
Type of operator mechanical latching
Reset Key release
Operator profile Red mushroom Ø 40 mm, unmarked
Type of keylock Ronis 3131A
Key withdrawal position Center
Head type Standard
Complementary
CAD overall width 40mm
CAD overall height 40mm
CAD overall depth 79mm
Net weight 0.07kg
Resistance to high pressure washer 7000000Pa at 55°C, distance : 0.1 m
Mechanical durability 300000cycles
Electrical composition code C7 for <4 contacts using single blocks in front mounting
C8 for <4 contacts using single and double blocks in front mounting
C11 for <3 contacts using single blocks in front mounting
C15 for <1 contacts using single blocks in front mounting
C10 for <4 contacts using single and double blocks in front mounting
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Dec 15, 2019
1
Environment
Protective treatment TH
Ambient air temperature for storage -40…70°C
Ambient air temperature for operation -40…70°C
Electrical shock protection class Class I conforming to IEC 61140
IP degree of protection IP66 conforming to IEC 60529
IP67
IP69
IP69K
NEMA degree of protection NEMA 13
NEMA 4X
NEMA 4
NEMA 12
IK degree of protection IK03 conforming to IEC 50102
Standards UL 508
EN/IEC 60947-1
EN/IEC 60947-5-4
EN/IEC 60947-5-1
JIS C8201-5-1
GB 14048.5
IEC 60364-5-53
CSA C22.2 No 14
JIS C8201-1
Product certifications DNV
LROS (Lloyds register of shipping)
CSA
UL listed
GL
BV
RINA
Vibration resistance 5 gn (f= 2…500Hz) conforming to IEC 60068-2-6
Shock resistance 30 gn (duration = 18ms) for half sine wave acceleration conforming to IEC 60068-2-27
50 gn (duration = 11ms) for half sine wave acceleration conforming to IEC 60068-2-27
Offer Sustainability
Sustainable offer status Green Premium product
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Environmental Disclosure Product Environmental Profile
Circularity Profile End of Life Information
Contractual warranty
Warranty 18 months
2
Product data sheet
Dimensions Drawings
ZB4BS1420
Dimensions
3
Product data sheet
Mounting and Clearance
ZB4BS1420
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on
Printed Circuit Board
Connection by Faston Connectors
(1) Diameter on finished panel or support
(2) 40mm min. / 1.57in. min.
(3) 30mm min. / 1.18in. min.
(4) Ø 22.5mm / 0.89in. recommended (Ø 22.3mm 0 +0.4 / 0.88in. 0 +0.016)
(5) 45mm min. / 1.78in. min.
(6) 32mm min. / 1.26in. min.
4
Product data sheet
Mounting and Clearance
ZB4BS1420
Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection
Panel Cut-outs (Viewed from Installer’s Side)
A: 30mm min. / 1.18in. min.
B: 40mm min. / 1.57in. min.
Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mm
A: 30mm min.
B: 40mm min.
5
Dimensions in in.
A: 1.18in. min.
B: 1.57in. min.
General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3mm / 0.012in: T1 + T2 = 0.3mm max.
Installation Precautions
● Minimum thickness of circuit board: 1.6mm / 0.06in.
● Cut-out diameter: 22.4mm ± 0.1 / 0.88in. ± 0.004
●Orientation of body/fixing collar ZB4BZ009: ± 2°30’ (excluding cut-outs marked a and b).
● Tightening torque of screws ZBZ006: 0.6N.m (5.3lbf.in) max.
● Allow for one ZB4BZ079 fixing collar/pillar and its fixing screws:
○ every 90mm / 3.54in. horizontally (X), and 120mm / 4.72in. vertically (Y).
○ with each selector switch head (ZB4BD•, ZB4BJ•, ZB4BG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
(1) Panel
(2) Printed circuit board
6
Mounting of Adapter (Socket) ZBZ01•
● 1 2 elongated holes for ZBZ006 screw access
● 2 1 hole Ø 2.4mm ± 0.05 / 0.09in. ± 0.002 for centring adapter ZBZ01•
● 3 8 × Ø 1.2mm / 0.05in. holes
● 4 1 hole Ø 2.9mm ± 0.05 / 0.11in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
● 6 4 holes Ø 2.4mm / 0.09in. for clipping in adapter ZBZ01•
Dimensions An + 18.1 relate to the Ø 2.4mm ± 0.05 / 0.09in. ± 0.002 holes for centring adapter ZBZ01•.
7
Product data sheet
Technical Description
ZB4BS1420
Electrical Composition Corresponding to Code C7
8
Product data sheet
Technical Description
ZB4BS1420
Electrical Compositions Corresponding to Code C8
9
Product data sheet
Technical Description
ZB4BS1420
Electrical Compositions Corresponding to Code C10
10
Product data sheet
Technical Description
ZB4BS1420
Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1
11
Product data sheet
Technical Description
ZB4BS1420
Electrical Composition Corresponding to Code C15
1 N/O
1 N/C
1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C
12
Product data sheet
Technical Description
ZB4BS1420
Legend
Single contact
Double contact
Light block
Possible location
ZB4BS1420 may be replaced by any of the following products:
Heads ZB4BS944
red Ø40 Emergency stop, switching off head Ø22 trigger and latching key release
Qty 1
Reason for Substitution: End of life | Substitution date: 17 September 2013 | 05/13/14
Heads ZB4BS94420
red Ø40 Emergency stop, switching off head Ø22 trigger and latching key release
Qty 1
Reason for Substitution: End of life | Substitution date: 17 September 2013 | 09/17/13
13