EB2-5NUL-L - NEC Electronics - Datasheet.Directory

DATA SHEET

DESCRIPTION

The EB2 series is a version of the EA2 series, suitable for surface mounting with infrared soldering (lRS) and

vapor phase soldering (VPS). This series has three variations of high solder joint reliability type, and low profile

type.

FEATURES

™Compact and lightweight : 7.5 mm × 14.3 mm × 9.3 mm, 1.5 g

™2 form c contact arrangement

™Low power consumption

™Low magnetic interference

™Breakdown voltage: 1 000 VAC (surge voltage 1 500 V), FCC Part 68 conformable

™UL recognized (E73266), CSA certified (LR 46266)

™Lineup in non-latch, single-coil latch and double-coil latch types

™Lineup in minimum footprint (9.3 × 14.3), and high solder joint reliability (20 years) types

™Lineup in low profile type (hight : 6.5 mm), and Ultra-low profile (hight : 5.6 mm)

APPLICATIONS

Electronic switching systems, PBX, key telephone systems, automatic test equipment and other electronic equipment.

ATTENTION

DO NOT EXCEED MAXIMUM RATINGS.

Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over

current. Incorrect use could result in abnormal heating, damage to related parts or cause burning.

READ CAUTIONS IN THE SELECTION GUIDE.

Read the cautions described in NEC's "Miniature Relays" (ER0046EJ∗) when you choose relays for

your application.

EB2 SERIES

MINIATURE SIGNAL RELAY

COMPACT AND LIGHT WEIGHT

SURFACE MOUNTING TYPE

Document No. ER0016EJ5V0DS00 (5th edition)

Date Published February 1999 M

Printed in Japan

The information in this document is subject to change without notice.

1994

EB2 SERIES

DATA SHEET ER0016EJ5V0DS00

PART NUMBER SYSTEM

EB2 - 5 S NUH - L

EB2 series

Nominal voltage

3, 4.5, 5, 6, 9, 12, 24 volts

Latch type

Nil: Non latch type

S : Single coil latch type

T : Double coil latch type

Packaging code

Nil: Tube type

L : Embossd carrying type (L type)

R : Embossd carrying type (R type)

Feature

Nil : Standard type

NU : UL recognized, CSA certified standard type

NUH : Minimum footprint type ∗

NUE : Low profile type ∗

NUL : Ultra-low profile type ∗

∗ UL recognized, CSA certified type

OUTLINE DRAWINGS AND DIMENSIONS PAD LAYOUTS (bottom view)

14.3 MAX.(0.56) 9.3 MAX.(0.37)

11.5(0.45)

7.5 MAX.(0.30)

1.35(0.05)

7.5 MAX.(0.30)

1.35(0.05)

7.62(0.30)

9.3(0.37)

7.62(0.30)

2.54 (0.1)2.542.542.54

Note. General tolerance: ±0.2 (±0.008)

∗

Relay hight of NUE TYPE – 6.5 mm (0.26) MAX. (Initial)

Note. General tolerance: ±0.1 (±0.004)

2.54 (0.1)2.542.542.54

EB2-..NUH

EB2-..

EB2-..NU

EB2-..NUE

Unit: mm (inch)

EB2-..NUH

EB2-..

EB2-..NU

EB2-..NUE

EB2-..NUL

Unit: mm (inch)

2.54(0.1)1.0(0.04)

8.46(0.33) 9.56(0.38)

1.84(0.07) 2.94(0.12)

∗

14.3 MAX.(0.56) 9.3 MAX.(0.37)

5.6 MAX.

(0.22)

11.5 (0.45)

7.62 (0.30)

2.54 (0.1)2.542.542.54

EB2-..NUL

PIN CONFIGURATIONS (bottom view)

12345

10 9 8 7 6

12345 12345

10 9 8

76 10 9 8 7 6

Index mark of relay derection

Non-latch type

(not energized position) Single coil latch type

(reset position)

S : Coil polarity of set (operate)

R : Coil polarity of reset (release)

Double coil latch type

(reset position)

EB2 SERIES

DATA SHEET ER0016EJ5V0DS00

2 form c

30 W (resistive) 62.5 VA (resistive)

220 Vdc 250 Vac

1 A

2 A

10 mV.dc, 10mA ∗1

50 mΩ typ. (Initial)

Silver alloy with gold overlay

140 mW (3 to 12 V)

200 mW (24 V)

100 mW (3 to 12 V)

150 mW (24 V)

79 mW (3 to 12 V)

113 mW (24 V)

56 mW (3 to 12 V)

85 mW (24 V)

Approximately 2 ms without diode

Approximately 1 ms without diode

1000 MΩ at 500 Vdc

1000 Vac (for one minute)

1500 V surge (10 × 160

s ∗2)

1000 Vac (for one minute)

1500 V surge (10 × 160

s∗2)

735 m / s2 (75 G) (misoperating)

980 m / s2 (100 G) (destructive failure)

10 to 55 Hz at double amplitude of 3 mm (20 G)

(misoperating)

10 to 55 Hz, at double amplitude of 5 mm (30 G)

(destructive failure)

–40°C to 85°C

18 degrees at nominal coil voltage

1 × 108 operations (Non-latch type) ∗3

1 × 107 operations (latch type)

50 Vdc 0.1 A (resistive), 1 × 10

operations at 85˚C, 2 Hz

10 Vdc 10 mA (resistive), 1 × 10

operations at 85˚C, 2 Hz

Approximately 1.5 grams

Contact Form

Maximum switching power

Maximum switching voltage

Maximum switching current

Maximum carrying current

Minimum carrying ratings

Initial contact resistance

Contact material

Non-latch type and double coil latch type

Single coil Latch type

Non-latch type and double coil latch type

Single coil latch type

Operate time (excluding bounce)

Release time (excluding bounce)

Insulation resistance

Between open contacts

Breakdown voltage Between adjacent contacts

Between coil and contact

Shock resistance

Vibration resistance

Ambient temperature

Coil temperature rise

Noload

Load

Weight

PERFORMANCE CHARACTERISTICS

∗1This value is a reference value in the resistance load.

Minimum capacity changes depending on seitching frequency and environment temperature and the load.

∗2Rise time : 10

s, fall time : 160

∗3This shows a number of operation where it can be running by which a fatal defect is not caused, and a number of

operation by which a steady characteristic is maintained is 1 × 107 times.

MARKINGS (top view)

2-5

9106

JAPAN

2-5NU

9106

JAPAN

Standard type UL recognized

CSA certified type

qPart number

wManufacturer

eCountry of origin

rDate code

tIndex mark of relay direction

(pin No.1, 10)

yUL, CSA Marking

Minimum operating Power

Nominal operating Power

Running specifications

Contact rating

UL Recognized CSA Certificated

(UL508)* (CSA C22.2 No14)

File No E73266 File No LR46266

30 Vdc, 1 A (Resistive)

110 Vdc, 0.3 A (Resistive)

125 Vac, 0.5 A (Resistive)

* Spacing : UL114, UL478

SAFETY STANDARD AND RATING

EB2 SERIES

DATA SHEET ER0016EJ5V0DS00

PRODUCT LINEUP

Non-latch Type

Nominal Coil

Voltage

(Vdc)

4.5

Coil

Resistance

(Ω) ±10 %

64.3

145

178

257

579

1028

2880

Must Operate

Voltage

(Vdc)

2.25

3.38

3.75

4.5

6.75

Must Release

Voltage

(Vdc)

0.3

0.45

0.5

0.6

0.9

1.2

2.4

Single-Coil Latch Type

at 20˚C

Nominal Coil

Voltage

(Vdc)

4.5

Coil

Resistance

(Ω) ±10 %

S 64.3

R 64.3

S 145

R 145

S 178

R 178

S 257

R 257

S 579

R 579

S 1028

R 1028

S 2880

R 2880

Must Operate

Voltage

(Vdc)

2.25

–

3.38

–

3.75

–

4.5

–

6.75

–

Must Release

Voltage

(Vdc)

–

2.25

–

3.38

–

3.75

–

4.5

–

6.75

–

Double-Coil Latch Type ∗∗ (Can not be driven by revese po;arity for reverse operation.)

Note ∗Test by pulse voltage

∗∗ S : Set coil (pin No.1... , pin No.5... ) R: Reset coil (pin No.10... , pin No.6... )

The latch type relays should be initalized at appointed position before using, and should be enegized to specific

polanity by a bone polabity to avoid wrong operation.

Any special coil requirement, please contact NEC for availability.

Nominal Coil

Voltage

(Vdc)

4.5

Coil

Resistance

(Ω) ±10 %

202.5

250

360

810

1440

3840

Must Operate

Voltage

(Vdc)

2.25

3.38

3.75

4.5

6.75

Must Release

Voltage

(Vdc)

2.25

3.38

3.75

4.5

6.75

+ – + –

EB2 SERIES

DATA SHEET ER0016EJ5V0DS00

TYPICAL PERFORMANCE DATA

1.0

0.5

0.4

0.3

0.2

30 100 200

250 V

220 V

0.136 A

0.25 A

DC Load (resistive)

AC Load (resistive)

Swiching Voltage (V)

100 200 300 400

Applied Power (mW)

SWITCHING CAPACITY COIL TEMPERATURE RISE

0 100 200 300 500400

Applied Power (mW)

0 100 200 300 500400

Applied Power (mW)

OPERATE TIME

RELEASE TIME WITHOUT DIODE

RUNNING SPECIFICATIONS (Nonload)

Release Time

Operate Time

Bounce Time at Release

62.5 V

Bounce Time at Operate

0 100 200 300 500400

Applied Power (mW)

RELEASE TIME WITH DIODE

Release Time

Bounce Time at Release

Operate Voltage

Release Voltage

Number of Operations ( × 10

operations)

510

Temperature : 85°C

Drive : 5 Vdc, 10 Hz 50% duty

Sample : EB2.5 n=10

Load : None

1000

500

300

200

100

10 23

Number of Operations ( × 10

operations)

510

Make contact

Break contact

Switching Current (A)

Ciol Temperature Rise (°C)

Operate Time or

Bounce Time at Operate (ms)

Release Time or

Bounce Time at Release (ms)

Release Time or

Bounce Time at Release (ms)

Operate Voltage or

Release Voltage (V)

Contact Resistance (mΩ)

EB2 SERIES

DATA SHEET ER0016EJ5V0DS00

ON ON

OFF

ON OFF OFF

Layout

ILayout

II Layout

III Layout

Sample

Layout V

OFF

Layout VI

ILayout

II III IV V

Min. Min.

Max.

–

–20

–30

–40

–50

ILayout

II III IV V VI

–

–20

–30

–40

–50

Drift Operate Voltage (%)

Drift of Release Voltage (%)

2.54

5 × 2.54

Mounting Layout (mm)

6 × 2.54

2.54

MAGNETIC INTERFERENCE

EB2 SERIES

DATA SHEET ER0016EJ5V0DS00

SOLDERING CONDITION

Time

T max.; 215

T max.; 235

200 max.

Temperature (˚C)

165 max.

100 max.

200

IRS Method

VPS Method

Note:

1. Temperature profile shows printed circuit board surface temperature on the relay terminal portion.

2. Check the actual soldering condition to use other method except above mentioned temperature profiles.

175

150

Temperature (˚C)

60 sec. max.

90 sec. max.60 sec.

200 sec.

80 sec.

30 sec.

TUBE PACKAGE

Rubber stopper (Red) Rubber stopper (Green)

Index Mark

586±1

( ) Reference

Outline of Package

Dimension of Package (Unit : mm) 40 pieces / Tube

Material : Polyvinyl chloride

(anti-static treated)

13.7±0.3

12.0±0.3

(4.5)

(4.6)

(6.2)

(2.5)

(0.5 t)

EB2 SERIES

GUIDE TO APPLICATIONS

1. When connecting coils, refer to the pin configuration to prevent misoperation or malfunction.

2. The latch type relay should be initialized at the appointed position (set or reset position) when using, and should

be energized or deenergized to the specified polarity to avoid wrong operations by reversed contact state.

3. Ultrasonic cleaning is not recommended to keep contact performance reliable. Alcohol-based solvents are

available as proper solvents.

4. Pressurized stress on the relay cover may affect reliable operation.

5. Minimum contact load of the relay is 10 mV, 10

A. This value is a reference value in the resistance load.

Minimum capacity changes depending on swiching frequency and environment temperature and the load.

TAPE PACKAGE

Top cover tape

Embossed carrying tape

Index mark of relay direction

Relay orientation mark and tape carrying direction.

Appearance Tape Dimensions Unit : mm (inch)

Index mark of relay direction

Tape carrying direction

EB2........-L EB2........-R

500 Relays/Reel (Standard)

Reel

16.0

(0.05 )

11.5

24.0(0.945)

14.7

(0.579)

1.75

ø1.5

ø2.2 (0.087)

(0.63)

(0.069)

(0.453)

2.0(0.079)

4.0(0.157)

0.4

(0.016)

+0.1

–0

+0.004

–0

EB2-∗∗ Max.8.1 12.1

EB2-∗∗NU (0.319) (0.476)

EB2-∗∗NUE

EB2-∗∗NUH Max.7.9 9.9

(0.311) (0.390)

EB2-∗∗NUL Max.6.5 12.1

(0.256) (0.476)

No part of this document may be copied or reproduced in any form or by any means without the prior written consent of

NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.

NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property

rights of third parties by or arising from use of a device described herein or any other liability arising from use of such

device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual

property rights of NEC Corporation or others.

While NEC Corporation has been making continuous effort to enhance the reliability of its electronic components, the

possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising

from a defect in an NEC electronic component, customers must incorporate sufficient safety measures in its design, such

as redundancy, fire-containment, and anti-failure features.

NEC devices are classified into the following three quality grades:

"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer

designated "quality assurance program" for a specific application. The recommended applications of a device depend on

its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particu-

lar application.

Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual

equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots

Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-

crime systems, safety equipment and medical equipment (not specifically designed for life support)

Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems

or medical equipment for life support, etc.

The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.

If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact

an NEC sales representative in advance.

Anti-radioactive design is not implemented in this product.