Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi5-Q08-VN6X2 LED 20 o 3,4 8 rectangular, height 8 mm top active face metal, GD-Zn 4-wire DC, 10...30 VDC SPDT, npn output cable connection Wiring diagram 13 3 32 npn BU BN + BK WH Type Ident-No. Bi5-Q08-VN6X2 16002 Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift Operating temperature 5 mm flush 3... 15 % 2 % 10 % -25 ...+ 70 C Rated operational voltage (DC) UB 10... 30 VDC Max. ripple 10 % Upp Rated operational current (DC) Ie 200 mA No-load current I0 15 mA Max. OFF-state current Max. switching frequency Rated insulation voltage Output function Short-circuit protection Max. voltage drop at Ie 0,1 mA 1 kHz 0,5 kV 4-wire, complementary, NPN yes, cyclic 1,8 V Wire breakage / reverse polarity protection yes / complete Housing style Dimensions Housing material Active face Wiring Cable Cable cross section Vibration resistance Shock resistance Degree of protection rectangular; Q08 32 x 20 x 8 mm metal, GD-Zn plastic, PA12-GF30 cable O 5,2, LifYY, PVC, 2 m 4 x 0,25 mm2 55 Hz (1 mm) 30 x g (11 ms) IP67 Supply voltage indication Switching status indication LED green LED yellow Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target. With inductive sensors, this field is generated by an LC resonant circuit with a ferrite core coil. Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi5-Q08-VN6X2 Mounting instructions Gap D Gap W Gap S Gap G minimum gap 2xB 3 x Sn 1xB 6 x Sn Width of active face B 20 mm B S D G W Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264