Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Inductive sensor
Bi5-Q08-VN6X2
●rectangular, height 8 mm
●top active face
●metal, GD-Zn
●4-wire DC, 10...30 VDC
●SPDT, npn output
●cable connection
Wiring diagram
Function principles
Inductive proximity switches are designed
for wear-free non-contact detection of me-
tal objects. For this they use a high-fre-
quency electro-magnetic AC field that
interacts with the target. With inductive
sensors, this field is generated by an LC re-
sonant circuit with a ferrite core coil.
+
WH
BK
BN
BU
npn
Type Bi5-Q08-VN6X2
Ident-No. 16002
Rated operating distance Sn 5 mm
Mounting mode flush
Hysteresis (switching distance) 3... 15 %
Min. repeat accuracy ≤ 2 %
Temperature drift ≤ ± 10 %
Operating temperature -25 ...+ 70 °C
Rated operational voltage (DC) UB10... 30 VDC
Max. ripple ≤ 10 % Upp
Rated operational current (DC) Ie≤ 200 mA
No-load current I0≤ 15 mA
Max. OFF-state current ≤ 0,1 mA
Max. switching frequency ≤ 1 kHz
Rated insulation voltage ≤ 0,5 kV
Output function 4-wire, complementary, NPN
Short-circuit protection yes, cyclic
Max. voltage drop at Ie≤ 1,8 V
Wire breakage / reverse polarity protection yes / complete
Housing style rectangular; Q08
Dimensions 32 x 20 x 8 mm
Housing material metal, GD-Zn
Active face plastic, PA12-GF30
Wiring cable
Cable Ø 5,2, LifYY, PVC, 2 m
Cable cross section 4 x 0,25 mm2
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 x g (11 ms)
Degree of protection IP67
Supply voltage indication LED green
Switching status indication LED yellow
8
ø 3,4
13
20
32
3
LED
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Inductive sensor
Bi5-Q08-VN6X2
Mounting instructions minimum gap
Gap D 2 x B
Gap W 3 x Sn
Gap S 1 x B
Gap G 6 x Sn
Width of active face B 20 mm
W
D
S
B
G
