DATA SHEET ATN3580 Series: Fixed Attenuator Pads Applications Attenuators Features Specified flat response to 40 GHz Return loss > 16 dB to 40 GHz Available at 1-10, 12, 15, 20, 30 and 40 dB Power handling to 1 W CW Rugged thin-film silicon chips Lead (Pb)-free, RoHS-compliant, and GreenTM Description The ATN3580 series of attenuator chips incorporates thin-film resistors on high-resistivity silicon to achieve precision attenuation, tight flatness and excellent return loss to 40 GHz. The design uses a balanced TEE resistive structure to assure broad bandwidth performance. The thin-film technology offers improved power-handling capability in comparison to the traditional thickfilm printed attenuator. All ATN3580 attenuator chips are specified for their attenuation at DC. A wafer probe sample test is performed to 40 GHz to assure the flatness specification. The absolute maximum ratings are shown in Table 1. Electrical specifications and minimum return loss are provided in Tables 2 and 3, respectively. Typical performance characteristics are shown in Figures 1 and 2. Drawings for suggested die mount and ribbon attachment, product outlines, and a suggested land pattern are shown in Figures 3 through 7. Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04-0074. Table 1. Absolute Maximum Ratings Characteristic Value Incident power @ 25 C 1W Operating temperature -55 C to +150 C Storage temperature -65 C to +150 C Electrostatic discharge: Charged-Device Model (CDM), Class 4 Human Body Model (HBM), Class 2 Machine Model (MM), Class B 1000 V 2000 V 200 V Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200141I * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * November 27, 2013 1 DATA SHEET * ATN3580 SERIES: FIXED ATTENUATOR PADS Table 2. Electrical Specifications at 25 C Attenuator Flatness Nominal Attenuation (dB) DC Tolerance (dB) 0.1 to 12 GHz (dB) 0.1 to 26.5 GHz (dB) 0.1 to 40 GHz (dB) Outline Drawing Part Number 1 0.15 0.2 0.4 0.6 516-060 ATN3580-01 2 0.15 0.2 0.4 0.6 516-060 ATN3580-02 3 0.25 0.2 0.4 0.6 516-060 ATN3580-03 4 0.25 0.2 0.4 0.6 516-060 ATN3580-04 5 0.25 0.3 0.5 0.8 516-060 ATN3580-05 6 0.25 0.3 0.5 0.8 518-060 ATN3580-06 7 0.25 0.3 0.5 0.8 518-060 ATN3580-07 8 0.35 0.3 0.5 0.8 518-060 ATN3580-08 9 0.35 0.3 0.5 0.8 518-060 ATN3580-09 10 0.35 0.4 0.6 1.0 518-060 ATN3580-10 12 0.50 0.4 0.6 1.0 518-060 ATN3580-12 15 0.50 0.4 0.6 1.0 518-060 ATN3580-15 20 1.10 0.4 0.6 1.0 518-060 ATN3580-20 30 1.60 0.6 1.0 2.0 518-060 ATN3580-30 40 1.60 1.0 2.0 4.0 518-060 ATN3580-40 Note: Performance is guaranteed only under the conditions listed in this Table. Table 3. Minimum Return Loss S11 0.1 to 7 GHz (dB) 0.1 to 12 GHz (dB) 0.1 to 26.5 GHz (dB) 0.1 to 40 GHz (dB) 25 23 18 15 ATN3580 Series Note: Performance is guaranteed only under the conditions listed in this Table. Typical Performance Characteristics 11 30 Return Loss (dB) Attenuation (dB) Flatness 10 9 0 10 20 30 Frequency (GHz) Figure 1. ATN3580-10 Typical Attenuation vs Frequency 40 20 10 0 0 10 20 30 Frequency (GHz) Figure 2. ATN3580-10 Typical Input Return Loss vs Frequency Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 November 27, 2013 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200141I 40 DATA SHEET * ATN3580 SERIES: FIXED ATTENUATOR PADS Suggested Die Mount and Ribbon Attachment Drawings, Outline Drawings, and a Suggested Land Pattern 1 mil [0.02 mm] Gold Wire O0.010 inch [0.25 mm] Vias 1 mil [0.02 mm] Gold Wire 3 mil Au [0.08 mm] Ribbon 250 mil long [0.64 mm] 2 Places O0.010 inch [0.25 mm] Vias 3 mil Au [0.08 mm] Ribbon 250 mil long [0.64 mm] 2 Places Ground Ground Input/Output Input/Output Input/Output Input/Output Ground Ground Y0346 Y0381 Figure 3. Suggested Die Mount and Ribbon Attachment (1 to 5 dB) Coplanar Resistor Pads Must Be Grounded 0.005 (0.127 mm) 0.001 (0.025 mm) See Note 3 2 Places 0.029 0.002 (0.737 mm) 0.009 0.022 (0.559 mm) 0.0075 (0.191 mm) 0.0055 (0.140 mm) 0.012 (0.30 mm) 0.010 (0.25 mm) Typ. Input/Output 0.002 (0.05 mm) Min. Typ. 0.030 (0.76 mm) 0.002 (0.051 mm) See Note 4 0.0045 (0.114 mm) 0.0035 (0.089 mm) 2 Places 0.027 (0.686 mm) Out Schematic Att. Pads In Figure 4. Suggested Die Mount and Ribbon Attachment ( 6 dB) 0.032 (0.81 mm) See Note 3 2 Places Coplanar Resistor, Pads Must Be Grounded 0.020 (0.51 mm) 0.026 (0.66 mm) 0.0055 (0.140 mm) 0.0045 (0.114 mm) 2 Places 0.027 0.002 (0.686 mm) 0.006 (0.15 mm) 0.004 (0.10 mm) Typ. Sq. 0.029 (0.74 mm) Silicon Schematic Att. Pads 0.0075 (0.190 mm) 0.0055 (0.140 mm) In 0.0075 (0.190 mm) 0.0055 (0.140 mm) 1. Cross hatching = gold contact areas. 2. Dimensions not specified in this drawing vary per attenuation value. 3. Indicates attenuation value. 4. This dimension can be as high as 0.012 for high attenuation values. Figure 5. 518-060 Outline Drawing 1. Cross hatching = gold contact areas. 2. Dimensions not specified in this drawing vary per attenuation value. 3. Indicates attenuation value. 4. This dimension can be as high as 0.012 for high attenuation values. Figure 6. 516-060 Outline Drawing Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200141I * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * November 27, 2013 Out DATA SHEET * ATN3580 SERIES: FIXED ATTENUATOR PADS 0.030 [0.76 mm] 0.047 [1.19 mm] O0.010 [0.25 mm] Vias 6X 4X 0.040 [1.02 mm] 0.140 [3.56 mm] 0.070 [1.78 mm] 0.010 [0.25 mm] 0.045 [1.13 mm] 0.030 [0.76 mm] Typ 0.062 [1.57 mm] 0.124 [3.15 mm] Notes: 1. Material: Alumina 99.6% Dielectric Constant: 9.9 Efffective Dielectric Constant: 6.8 Transmission Line Width: 0.010 inch Substrate Thickness: 0.010 inch Coplanar Gap: 0.025 inch 3. Unless otherwise specified: Dimensions are in inches Tolerances on finish: RMS 63 Angles 0.5 Fractions: 1/64 4 place decimals: 0.0005 3 place decimals: 0.005 2 place decimals: 0.02 2. Plating: Gold 100 to 150 micro-inches 4. Commercial published tolerances shall apply to tubing, bar, plate, etc. All threads to be Class 2A or Class 2B. Plated parts must fit gauges and meet specified tolerances after plating. Y0344 Figure 7. Suggested Land Pattern Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 November 27, 2013 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200141I DATA SHEET * ATN3580 SERIES: FIXED ATTENUATOR PADS Copyright (c) 2002-2008, 2013 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200141I * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * November 27, 2013