NPN-Silizium-Fototransistor Silicon NPN Phototransistor Lead (Pb) Free Product - RoHS Compliant SFH 3204 Wesentliche Merkmale Features * Sehr kleines Sidelooker SMT-Gehause * Speziell geeignet fur Anwendungen im Bereich von 420 nm bis 1100 nm * Groer Empfangswinkel 60 * Very small sidelooker SMT package * Especially suitable for applications from 420 nm to 1100 nm * Large viewing angle 60 Anwendungen Applications * Miniaturlichtschranken * Sensorik (z.B. Handy) * Messen/Steuern/Regeln" * Miniature photointerrupters * Sensor technology (eg mobile phone) * For control and drive circuits Typ Type Bestellnummer Ordering Code SFH 3204 Q65110A2506 2007-04-03 1 SFH 3204 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 100 C Kollektor-Emitterspannung Collector-emitter voltage VCE VCE (t < 2 min) 15 30 V Kollektorstrom Collector current IC 15 mA Kollektorspitzenstrom, < 10 s Collector surge current ICS 75 mA Emitter-Kollektorspannung Emitter-collector voltage VEC 7 V 2007-04-03 2 SFH 3204 Kennwerte (TA = 25 C, = 950 nm) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 920 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 450 ... 1120 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 0.04 mm2 Abmessungen der Chipflache Dimensions of chip area LxB LxW 0.35 x 0.35 mm x mm Halbwinkel Half angle 60 Grad deg. Kapazitat Capacitance VCE = 5 V, f = 1 MHz, E = 0 CCE 1.3 pF Dunkelstrom Dark current VCE = 20 V, E = 0 ICEO 2 (< 50) nA Fotostrom Photocurrent Ee = 0.1 mW/cm2,VCE = 5 V IPCE >32 A Anstiegszeit/Abfallzeit Rise and fall time IC = 1 mA, VCC = 5 V, RL = 1 k tr,tf 7 s Kollektrr-Emitter-Sattigungsspannung Collector-emitter saturation voltage IC = 10A Ee = 0.1 mW/cm2, = 950 nm VCEsat 140 mV 2007-04-03 3 SFH 3204 Directional Characteristics Srel = f () 40 30 20 10 0 OHF02459 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 2007-04-03 0.8 0.6 0.4 0 20 40 60 80 4 100 120 SFH 3204 Rel. Spectral Sensitivity, Srel = f () Dark Current ICEO = f (VCE), E = (0) OHF02458 100 Srel % Dark Current ICEO = f (TA), VCE = 20 V, E = (0) OHF00383 10 1 nA OHF00380 10 3 nA CEO CEO 80 10 2 10 0 60 10 1 40 10 -1 10 0 20 0 400 500 600 700 800 900 nm 1100 10 -2 0 10 20 V 30 V CE Photocurrent IPCE = f (TA), VCE = 5 V, normalized to 25 C PCE PCE 25 Collector-Emitter Capacitance CCE = f (VCE), f = 1 MHz OHF01524 1.6 C CE 1.4 OHF00592 3.0 pF 2.5 1.2 2.0 1.0 1.5 0.8 0.6 1.0 0.4 0.5 0.2 0 -25 0 25 50 75 C 100 0 -2 10 10 -1 10 0 V 10 2 VCE TA 2007-04-03 10 1 5 10 -1 ) 0 20 40 60 80 C 100 TA SFH 3204 Mazeichnung Package Outlines 0.25 (0.010) 0.20 (0.008) 0.5 (0.020) 1.0 (0.039) typ. 0.3 Chipcenter (15) 0.3 (0.012) 0.7 (0.028) 2.1 (0.083) 1.2 (0.047) 2.3 (0.091) Collector (0.4 (0.016)) 0.5 (0.020) 2.9 (0.114) 3.1 (0.122) 0 ... 0.1 (0 ... 0.004) (0.6 (0.024)) 1.3 (0.051) 1.1 (0.043) GPLY6125 Mae in mm (inch) / Dimensions in mm (inch). E Nur fur Emitter notwendig Only for Emitters necessary 2007-04-03 6 SFH 3204 Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 s 200 250 t Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering l OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 (nach J-STD-020C) (acc. to J-STD-020C) 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 t 2007-04-03 7 s 300 SFH 3204 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-04-03 8