F-219 MEC1-120-02-F-D-A MEC1-130-02-F-D-A MEC1-140-02-L-D (1.00 mm) .0394" MEC1 SERIES MINI EDGE CARD SOCKET Mates with (1.60 mm) .062" card Mates with: (1.60 mm) .062" card SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?MEC1 APPLICATION Insulator Material: Black LCP Contact Material: BeCu Plating: Sn or Au over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +125 C Current Rating: 2.2 A per pin (2 adjacent pins powered) Voltage Rating: 300 VAC Insertion Depth: (5.84 mm) .230" to (8.13 mm) .320" RoHS Compliant: Yes HIGH-SPEED CHANNEL PERFORMANCE Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com PROCESSING Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (05-20) (0.15 mm) .006" max (30-70)* *(.004" stencil solution may be available; contact IPG@samtec.com) 1 MEC1 Optional Alignment pin 14 MEC1 G b p s POSITIONS PER ROW PLATING OPTION 02 D NP -A RECOGNITIONS -F 05, 08, 20, 30, 40, 50, 60, 70 For complete scope of recognitions see www.samtec.com/quality = Gold flash on contact, Matte tin on tail = 10 " (0.25 m) Gold on contact, Matte Tin on tail ALSO AVAILABLE (MOQ Required) * Locking Clip (Manual placement required) * Other platings POSITIONS PER ROW (No. of Positions + 2) x (1.00) .03937 + (2.54) .100 02 140 01 139 05 08 20 30 40 50 60 70 (6.99) .275 (0.36) (1.00) .014 .03937 (No. of Positions + 2) x (1.00) .03937 Important Note: Samtec recommends that pads on the mating board be Gold plated. Some sizes, styles and options are non-standard, non-returnable. (8.89) .350 (1.83) .072 (9.04) .356 -NP = Alignment Pin metal or plastic at Samtec discretion. Leave Blank for polarization = (7.87 mm) .310" DIA Polyimide film Pick & Place Pad = No Polarization (05, 08, 20 & 30 positions only) -L FILE NO. E111594 Notes: While optimized for 50 W applications, this connector with alternative signal/ground patterns may also perform well in certain 75 W applications. OTHER OPTION POLARIZED POSITIONS (No Contact) 3, 4 5, 6 15, 16 21, 22 31, 32 41, 42 31, 32, 63 & 64 53, 54, 115 & 116 (0.15) .006 (1.40) .055 (8.51) .335 (0.89) .035 DIA -A OPTION Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. -K -TR = Tape & Reel (05-60 only)