STP80NF03L-04 STB80NF03L-04 STB80NF03L-04-1 N-CHANNEL 30V - 0.0035 - 80A D2PAK/I2PAK/TO-220 STripFETTM II POWER MOSFET TYPE VDSS RDS(on) ID STB80NF03L-04/-1 STP80NF03L-04 30 V 30 V <0.004 <0.004 80 A 80 A TYPICAL RDS(on) = 0.0035 EXCEPTIONAL dv/dt CAPABILITY 100% AVALANCHE TESTED LOW THRESHOLD DRIVE 3 3 12 1 I2PAK TO-262 D2PAK TO-263 DESCRIPTION This Power MOSFET is the latest development of STMicroelectronis unique "Single Feature SizeTM" stripbased process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. 3 1 2 TO-220 INTERNAL SCHEMATIC DIAGRAM APPLICATIONS HIGH CURRENT, HIGH SPEED SWITCHING MOTOR CONTROL, AUDIO AMPLIFIERS DC-DC & DC-AC CONVERTERS AUTOMOTIVE ENVIRONMENT (INJECTION, ABS, AIR-BAG, LAMPDRIVERS, Etc.) Ordering Information SALES TYPE STB80NF03L-04 STB80NF03L-04T4 STP80NF03L-04 STB80NF03L-04-1 MARKING 80NF03L-04 @ 80NF03L-04 @ 80NF03L-04 @ 80NF03L-04 @ ABSOLUTE MAXIMUM RATINGS Symbol Parameter VDS Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 k) VDGR VGS Gate- source Voltage Drain Current (continuous) at TC = 25C ID(**) Drain Current (continuous) at TC = 100C ID(**) IDM(*) Drain Current (pulsed) Ptot Total Dissipation at TC = 25C Derating Factor Peak Diode Recovery voltage slope dv/dt (1) EAS (2) Single Pulse Avalanche Energy Tstg Storage Temperature Tj Max. Operating Junction Temperature (*) Pulse width limited by safe operating area. (**) Current Limited by Package February 2003 . PACKAGE D2PAK D2PAK TO-220 I2PAK PACKAGING TUBE TAPE & REEL TUBE TUBE Value 30 30 20 80 80 320 300 2 2 2.3 -60 to 175 175 Unit V V V A A A W W/C V/ns J C C (1) ISD 80A, di/dt 240A/s, VDD 24V, Tj TJMAX (2) Starting T j = 25 oC, ID = 40A, VDD = 20V 1/11 STB80NF03L-04/-1/STP80NF03L-04 THERMAL DATA Rthj-case Rthj-amb Tl Thermal Resistance Junction-case Thermal Resistance Junction-ambient Maximum Lead Temperature For Soldering Purpose Max Max Typ 0.5 62.5 300 C/W C/W C ELECTRICAL CHARACTERISTICS (Tcase = 25 C unless otherwise specified) OFF Symbol Parameter Test Conditions Drain-source Breakdown Voltage ID = 250 A IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating TC = 125C IGSS Gate-body Leakage Current (VDS = 0) VGS = 20 V V(BR)DSS VGS = 0 Min. Typ. Max. 30 Unit V 1 10 A A 100 nA Max. Unit ON (*) Symbol Parameter Test Conditions VGS(th) Gate Threshold Voltage VDS = VGS ID = 250 A RDS(on) Static Drain-source On Resistance VGS = 10 V VGS = 4.5 V ID = 40 A ID = 40 A Min. Typ. 1 V 0.0035 0.004 0.004 0.0055 Typ. Max. Unit DYNAMIC Symbol 2/11 Parameter Test Conditions gfs (*) Forward Transconductance VDS = 15 V Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance VDS = 25V, f = 1 MHz, VGS = 0 ID = 15 A Min. 50 S 5500 1670 290 pF pF pF STB80NF03L-04/-1/STP80NF03L-04 ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol Parameter Test Conditions Min. Typ. Max. Unit td(on) tr Turn-on Delay Time Rise Time ID = 40 A VDD = 15 V RG = 4.7 VGS = 4.5 V (Resistive Load, Figure 3) 30 270 Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD =24V ID =80 A VGS=4.5V 85 23 40 110 nC nC nC Typ. Max. Unit ns ns SWITCHING OFF Symbol Parameter Test Conditions Min. td(off) tf Turn-off Delay Time Fall Time ID = 40 A VDD = 15 V RG = 4.7, VGS = 4.5 V (Resistive Load, Figure 3) 110 95 ns ns tr(Voff) tf tc Off-Voltage Rise Time Fall Time Cross-over Time ID = 80 A Vclamp = 24 V RG = 4.7 VGS = 4.5 V (Inductive Load, Figure 5) 125 75 125 ns ns ns SOURCE DRAIN DIODE Symbol Parameter ISD ISDM (*) Source-drain Current Source-drain Current (pulsed) VSD (*) Forward On Voltage ISD = 80 A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current di/dt = 100A/s ISD = 80 A VDD = 20 V Tj = 150C (see test circuit, Figure 5) trr Qrr IRRM Test Conditions Min. Typ. VGS = 0 75 0.15 4 Max. Unit 80 320 A A 1.5 V ns C A (*)Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. (*)Pulse width limited by safe operating area. Safe Operating Area Thermal Impedance 3/11 STB80NF03L-04/-1/STP80NF03L-04 Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations 4/11 STB80NF03L-04/-1/STP80NF03L-04 Normalized Gate Threshold Voltage vs Temperature Normalized on Resistance vs Temperature Source-drain Diode Forward Characteristics Normalized Breakdown Voltage vs Temperature. . . 5/11 STB80NF03L-04/-1/STP80NF03L-04 Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 6/11 STB80NF03L-04/-1/STP80NF03L-04 D2PAK MECHANICAL DATA DIM. mm. MIN. TYP. inch. MAX. MIN. TYP. TYP. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.028 0.037 B2 1.14 1.7 0.045 0.067 C 0.45 0.6 0.018 0.024 C2 1.21 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 10.4 0.394 D1 E 8 10 E1 G 0.315 8.5 0.409 0.334 4.88 5.28 0.192 0.208 L 15 15.85 0.591 0.624 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.069 M 2.4 3.2 0.094 0.126 8 0 R V2 0.4 0 0.015 8 7/11 STB80NF03L-04/-1/STP80NF03L-04 TO-262 (I2PAK) MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 e 2.4 2.7 0.094 0.106 E 10 10.4 0.393 0.409 L 13.1 13.6 0.515 0.531 L1 3.48 3.78 0.137 0.149 L2 1.27 1.4 0.050 0.055 E e B B2 C2 A1 A C A L1 L2 D L P011P5/E 8/11 STB80NF03L-04/-1/STP80NF03L-04 TO-220 MECHANICAL DATA mm DIM. MIN. inch MAX. MIN. A 4.40 TYP. 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 D1 TYP. 1.27 MAX. 0.050 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.067 F2 1.14 1.70 0.044 0.067 G 4.95 5.15 0.194 0.203 G1 2.4 2.7 0.094 0.106 H2 10.0 10.40 0.393 L2 0.409 16.4 0.645 13.0 14.0 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.2 6.6 0.244 0.260 L9 3.5 3.93 0.137 0.154 DIA. 3.75 3.85 0.147 0.151 D1 C D A E L4 H2 G G1 F1 L2 F2 F Dia. L5 L9 L7 L6 L4 P011C 9/11 STB80NF03L-04/-1/STP80NF03L-04 D2PAK FOOTPRINT TUBE SHIPMENT (no suffix)* TAPE AND REEL SHIPMENT (suffix "T4")* REEL MECHANICAL DATA DIM. mm MIN. A DIM. mm inch MIN. MAX. MIN. MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0075 0.082 R 50 T 0.25 0.35 .0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 10/11 1.574 MIN. 330 B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA inch MAX. MAX. 12.992 0.059 13.2 0.504 0.520 0.795 26.4 0.960 1.039 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB80NF03L-04/-1/STP80NF03L-04 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is registered trademark of STMicroelectronics 2002 STMicroelectronics - All Rights Reserved All other names are the property of their respective owners. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 11/11