036 RSP
www.vishay.com Vishay BCcomponents
Revision: 15-Jul-16 1Document Number: 28312
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Electrolytic Capacitors
Radial Semi-Professional
Fig. 1
FEATURES
• Useful life: 3000 h at +85 °C,
750 h at +105 °C
• Reduced leakage current
• Miniaturized, high CV-product per unit volume
• Natural pitch 2.5 mm and 5 mm
• Polarized aluminum electrolytic capacitors, non-solid
electrolyte
• Radial leads, cylindrical aluminum case, all-insulated (light
blue)
• Charge and discharge proof
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive, telecommunication, industrial, EDP, and
audio-video
• Coupling, decoupling, smoothing, filtering, buffering,
timing
• Portable and mobile equipment (small size, low mass)
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code in accordance with IEC 60062
• Code indicating factory of origin
• Name of manufacturer
• Minus-sign on top to identify the negative terminal
• Series number (036)
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes (Ø D x L in mm) 5 x 11 and 8.2 x 11
Rated capacitance range, CR2.2 μF to 470 μF
Tolerance on CR± 20 %; ± 10 % on request
Rated voltage range, UR6.3 V to 100 V
Category temperature range -55 °C to +85 °C
Endurance test at 85 °C 2000 h
Useful life at 105 °C 750 h
Useful life at 85 °C 3000 h
Useful life at 40 °C, 1.4 x IR applied 80 000 h
Shelf life at 0 V, 85 °C 500 h
Based on sectional specification IEC 60384-4 / EN130300
Climatic category IEC 60068 55 / 085 / 56
148 RUS
116 RLL
038 RSU
036 RSP
031 RLC
higher
CV- values
miniaturized
low
leakage
current longer life
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
6.310162535405063100
2.2-------5 x 11 -
3.3-------5 x 11 -
4.7-------5 x 11 -
6.8-------5 x 11 -
10 ------5 x 11 5 x 11 8.2 x 11
-------8.2 x 11 -
15-----5 x 11 -5 x 11 -
22 ----5 x 11 --5 x 11 8.2 x 11
-------8.2 x 11 -
33 - - 5 x 11 - - - 5 x 11 8.2 x 11 -
47 - 5 x 11 - - 5 x 11 - 8.2 x 11 8.2 x 11 -
68 - - - 5 x 11 - 8.2 x 11 - 8.2 x 11 -
100 5 x 11 - 5 x 11 8.2 x 11 - - 8.2 x 11 - -
150 - 5 x 11 8.2 x 11 - 8.2 x 11 - - - -
220 - 8.2 x 11 8.2 x 11 8.2 x 11 - - - - -
3308.2 x 11 -8.2 x 11 ------
470-8.2 x 11 -------
036 RSP
www.vishay.com Vishay BCcomponents
Revision: 15-Jul-16 2Document Number: 28312
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads
Fig. 4 - Form TFA: Taped in box (ammopack) Fig. 5 - Form TNA: Taped in box (ammopack)
Table 1
Note
• For tape dimensions, please see www.vishay.com/doc?28360.
Ø D
L
F
15 min.
5 min.
Ø d
+-
Ø D
L
Ø d
-+
5 ± 0.5
4+ 1
0
Case Ø D x L = 8.2 mm x 11 mm only
Pitch F = 5 mm
Case Ø D x L = 5 mm x 11 mm and 8.2 mm x 11 mm
Pitch F = 2.5 mm
Case Ø D x L = 5 mm x 11 mm only
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE Ø d Ø Dmax. Lmax. FMASS
(g)
PACKAGING QUANTITIES
FORM
CA, CB
FORM
TFA, TNA
5 x 11 11 0.5 5.5 12 2.5 ± 0.5 0.4 1000 2000
8.2 x 11 13 0.6 8.7 12 5.0 ± 0.5 1.1 1000 1000
036 RSP
www.vishay.com Vishay BCcomponents
Revision: 15-Jul-16 3Document Number: 28312
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
ORDERING EXAMPLE
Electrolytic capacitor 036 series
100 μF / 16 V; ± 20 %
Nominal case size: Ø 5 x 11 mm; Form TFA
Ordering code: MAL203635101E3
Former 12NC: 2222 036 35101
Table 2
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRRated capacitance at 100 Hz, tolerance ± 20 %
IRRated RMS ripple current at 100 Hz, 85 °C
IL1 Max. leakage current after 1 min at UR
tan Max. dissipation factor at 100 Hz
Z Max. impedance at 10 kHz and 20 °C
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE
SIZE
Ø D x L
(mm)
IR
100 Hz
85 °C
(mA)
IL2
2 min
(μA)
tan
100 Hz
Z
10 kHz
()
ORDERING CODE MAL2036.......
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA
F
(mm)
FORM
CB
F
(mm)
FORM
TFA
F
(mm)
FORM
TNA
F
(mm)
6.3 100 5 x 11 130 7 0.20 1.7 53101E3 2.5 - - 33101E3 5.0 73101E3 2.5
330 8.2 x 11 300 16 0.20 0.52 53331E3 5.0 63331E3 5.0 33331E3 5.0 - -
10
47 5 x 11 95 6 0.16 2.8 54479E3 2.5 - - 34479E3 5.0 74479E3 2.5
150 5 x 11 150 12 0.20 1.3 54151E3 2.5 - - 34151E3 5.0 74151E3 2.5
220 8.2 x 11 260 17 0.16 0.59 54221E3 5.0 64221E3 5.0 34221E3 5.0 - -
470 8.2 x 11 400 31 0.20 0.43 54471E3 5.0 64471E3 5.0 34471E3 5.0 - -
16
33 5 x 11 90 7 0.14 2.7 55339E3 2.5 - - 35339E3 5.0 75339E3 2.5
100 5 x 11 160 13 0.16 1.6 55101E3 2.5 - - 35101E3 5.0 75101E3 2.5
150 8.2 x 11 230 18 0.14 0.6 55151E3 5.0 65151E3 5.0 35151E3 5.0 - -
220 8.2 x 11 280 24 0.16 0.55 55221E3 5.0 65221E3 5.0 35221E3 5.0 - -
330 8.2 x 11 390 35 0.16 0.48 55331E3 5.0 65331E3 5.0 35331E3 5.0 - -
25
68 5 x 11 140 13 0.14 1.8 56689E3 2.5 - - 36689E3 5.0 76689E3 2.5
100 8.2 x 11 210 18 0.12 0.7 56101E3 5.0 66101E3 5.0 36101E3 5.0 - -
220 8.2 x 11 310 36 0.14 0.55 56221E3 5.0 66221E3 5.0 36221E3 5.0 - -
35
22 5 x 11 87 8 0.10 2.7 90001E3 2.5 - - 90027E3 5.0 90389E3 2.5
47 5 x 11 130 13 0.12 1.9 90094E3 2.5 - - 90098E3 5.0 90391E3 2.5
150 8.2 x 11 270 35 0.12 0.6 90099E3 5.0 90101E3 5.0 90103E3 5.0 - -
40 15 5 x 11 72 7 0.10 3.7 57159E3 2.5 - - 37159E3 5.0 77159E3 2.5
68 8.2 x 11 180 20 0.10 0.81 57689E3 5.0 67689E3 5.0 37689E3 5.0 - -
50
10 5 x 11 60 6 0.08 4.5 90004E3 2.5 - - 90028E3 5.0 90392E3 2.5
33 5 x 11 110 13 0.10 2.1 90104E3 2.5 - - 90108E3 5.0 90393E3 2.5
47 8.2 x 11 160 18 0.08 0.96 90011E3 5.0 90012E3 5.0 90031E3 5.0 - -
100 8.2 x 11 250 33 0.10 0.7 90109E3 5.0 90111E3 5.0 90113E3 5.0 - -
63
2.2 5 x 11 25 4 0.06 18 58228E3 2.5 - - 38228E3 5.0 78228E3 2.5
3.3 5 x 11 38 5 0.06 12 58338E3 2.5 - - 38338E3 5.0 78338E3 2.5
4.7 5 x 11 45 5 0.06 8.5 58478E3 2.5 - - 38478E3 5.0 78478E3 2.5
6.8 5 x 11 55 6 0.06 5.9 58688E3 2.5 - - 38688E3 5.0 78688E3 2.5
10 5 x 11 70 7 0.06 4.0 58109E3 2.5 - - 38109E3 5.0 78109E3 2.5
10 8.2 x 11 120 7 0.04 2.8 90036E3 5.0 90041E3 5.0 90181E3 5.0 - -
15 5 x 11 80 9 0.07 3.1 58159E3 2.5 - - 38159E3 5.0 78159E3 2.5
22 5 x 11 100 11 0.08 2.7 58229E3 2.5 - - 38229E3 5.0 78229E3 2.5
22 8.2 x 11 150 11 0.05 1.4 90117E3 5.0 90118E3 5.0 90139E3 5.0 - -
33 8.2 x 11 160 16 0.06 1.2 58339E3 5.0 68339E3 5.0 38339E3 5.0 - -
47 8.2 x 11 190 21 0.07 1.0 58479E3 5.0 68479E3 5.0 38479E3 5.0 - -
68 8.2 x 11 210 29 0.08 0.88 58689E3 5.0 68689E3 5.0 38689E3 5.0 - -
100 10 8.2 x 11 80 9 0.06 3.5 59109E3 5.0 69109E3 5.0 39109E3 5.0 - -
22 8.2 x 11 110 16 0.06 1.8 59229E3 5.0 69229E3 5.0 39229E3 5.0 - -
036 RSP
www.vishay.com Vishay BCcomponents
Revision: 15-Jul-16 4Document Number: 28312
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CAPACITANCE (C)
Fig. 6 - Typical multiplier of capacitance
as a function of ambient temperature
Fig. 7 - Typical multiplier of capacitance
as a function of ambient temperature
IMPEDANCE (Z)
Fig. 8 - Typical impedance as a function of frequency Fig. 9 - Typical impedance as a function of frequency
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage Us 1.15 UR
Reverse voltage Urev 1 V
Current
Leakage current
After 1 min
UR = 6.3 V to 100 V IL1 0.006 CR x UR + 3 μA
After 5 min
UR = 6.3 V to 100 V IL5 0.001 CR x UR + 3 μA
Inductance
Equivalent series inductance (ESL) Case Ø D x L = 5 mm x 11 mm Typ. 13 nH
Case Ø D x L = 8.2 mm x 11 mm Typ. 16 nH
Resistance
Equivalent series resistance (ESR) Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR
0.5-60 -40 -20 0 20 40 60 80
Tamb (°C)
0.6
0.7
0.8
0.9
1.0
1.1
2
1
3
4
5
1
5
C0
C
Curve 1: 63 V
Curve 2: 50 V
Curve 3: 35 V; 40 V; 100 V
Curve 4: 16 V; 25 V
Curve 5: 6.3 V; 10 V
C0 = Capacitance at 20 °C, 100 Hz
0.5 105
104
103
102
10
0.6
0.7
0.8
0.9
1.0
1.1
2
1
3
4
6
5
7
f (Hz)
C0
C
Curve 1: 63 V (2.2 µF)
Curve 2: 63 V (> 2.2 µF)
Curve 3: 50 V
Curve 4: 35 V; 40 V; 100 V
Curve 5: 25 V
Curve 6: 16 V
Curve 7: 6.3 V; 10 V
C0 = Capacitance at 20 °C, 100 Hz Tamb = 20 °C
106
105
104
103
102
103
10
1
102
Z
(Ω)1
2
3
4
5
6
7
8
9
10
11
12
f (Hz)
Curve 1: 2.2 µF
Curve 2: 3.3 µF
Curve 3: 4.7 µF
Curve 4: 6.8 µF
Curve 5: 10 µF
Curve 6: 15 µF
Curve 7: 22 µF
Curve 8: 33 µF
Curve 9: 47 µF
Curve 10: 68 µF
Curve 11: 100 µF
Curve 12: 150 µF
Case Ø D x L = 5 mm x 11 mm Tamb = 20 °C
106
105
104
103
102
103
10
1
102
Z
(Ω)
f (Hz)
6
5
7
8
10
9
11
12
13
Curve 1: 2.2 µF
Curve 2: 4.7 µF
Curve 3: 10 µF, 100 V
Curve 4: 10 µF, 63 V
Curve 5: 22 µF, 63 V
Curve 6: 33 µF
Curve 7: 47 µF
Curve 8: 68 µF
Curve 9: 100 µF
Curve 10: 150 µF
Curve 11: 220 µF
Curve 12: 330 µF
Curve 13: 470 µF
1
2
3
4
5
6
7
8
9
10
11
12
13
Case Ø D x L = 8.2 mm x 11 mm Tamb = 20 °C
036 RSP
www.vishay.com Vishay BCcomponents
Revision: 15-Jul-16 5Document Number: 28312
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RIPPLE CURRENT AND USEFUL LIFE
Fig. 10 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 3
Table 4
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY
(Hz)
IR MULTIPLIER
UR = 6.3 V TO 10 V UR = 16 V TO 35 V UR = 40 V TO 100 V
50 0.90 0.85 0.80
100 1.00 1.00 1.00
300 1.12 1.20 1.25
1000 1.20 1.30 1.40
3000 1.25 1.35 1.50
10 000 1.30 1.40 1.60
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance
IEC 60384-4 /
EN130300
subclause 4.13
Tamb = 85 °C;
UR applied;
2000 h
UR 6.3 V; C/C: +15 % / -30 %
UR > 6.3 V; C/C: ± 15 %
tan 1.3 x spec. limit
Z 2 x spec. limit
IL5 spec. limit
Useful life CECC 30301
subclause 1.8.1
Tamb = 85 °C;
UR and IR applied;
3000 h
UR 6.3 V; C/C: +45 % / -50 %
UR > 6.3 V; C/C: ± 45 %
tan 3 x spec. limit
Z 3 x spec. limit
IL5 spec. limit
No short or open circuit
Total failure percentage: 1 %
Shelf life
(storage at high
temperature)
IEC 60384-4 /
EN130300
subclause 4.17
Tamb = 85 °C; no voltage applied;
500 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
C/C, tan , Z:
for requirements see
“Endurance test” above
IL5 spec. limit
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100
Tamb (°C)
Lifetime multiplier
(1)
70
50
4.0
6.0
2.0
1.5
30
15
10
3.0
20
1.0
CCC205
IA
IR
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz, 85 °C
(1) Useful life at 85 °C and IR applied: 3000 h
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
