Type A NFC RFID Inlay
AD-721
© 2016 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA
Dimensions
0.827 in [21 mm] Diameter
Operating Frequency
13.56 MHz
RF Protocol
ISO-14443A
Chip
NXP NTAG213
User Memory
144 bytes
UID
7 bytes
Avery Dennison is pleased to introduce AD-721, a smartphone compliant, NFC RFID inlay
optimized for a growing number of RFID tagging applications requiring close range (near field)
communication.
Common Applications
Retail Environment
Print Media
Miscellaneous Applications
Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to
electronics/RFID to keep environmental impact and static charge to a minimum.
Applications: This product should be tested by the customer/ user thoroughly under end use conditions
to ensure the product meets the particular requirements. Avery Dennison does not represent that this
product is fit for any particular purpose or use.
Warranty: Please refer to Avery Dennison RFID standard terms and conditions.
Product Information: Avery Dennison reserves the right to modify, change, supplement or discontinue
product offerings at any time without notice. The information contained herein is believed to be reliable but
Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Trademark statement: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison
Corporation. For the most recent information on Avery Dennison products, visit
www.rfid.averydennison.com.
PART NUMBER
RF700069
RF700070
RF750027
Format
Dry Inlay
PS Inlay
Label
Antenna dimensions (CDxMD)
0.827 in [21 mm] Diameter
0.827 in [21 mm] Diameter
0.827 in [21 mm] Diameter
Die-cut dimensions
N/A
0.984 in [25 mm] Diameter
0.984 in [25 mm] Diameter
Inlay substrate material
PET
PET
PET
Inlay-to-liner adhesive
N/A
General purpose permanent
hot melt
General purpose permanent
hot melt
Liner material
N/A
65 g Paper Liner
65 g Paper Liner
Face Sheet
N/A
N/A
80 g Paper
Standard pitch
1.25 in (31.75 mm)
1.25 in (31.75 mm)
1.25 in (31.75 mm)
Standard web width
2.36 in (60 mm)
2.36 in (60 mm)
2.36 in (60 mm)
Total thickness over chip
Nominal 200 um
Nominal 290 um
Nominal 360 um
Operating temperature
-40º to 158 ºF (-40º to 70 ºC)
-4º to 122 ºF (-25º to 50 ºC)
-4º to 122 ºF (-25º to 50 ºC)
RoHS
EU Directive 2011/65/EU
Compliant
EU Directive 2011/65/EU
Compliant
EU Directive 2011/65/EU
Compliant
Quality assurance
100% read tested with-of-
tolerance inlay marked
100% read tested with-of-
tolerance inlay marked
100% read tested with-of-
tolerance inlay marked
Un-wind direction
Inlay-side Out
Inlay-side Out
Inlay-side Out
Core size with adaptor insert
3 in (76.2 mm)
3 in (76.2mm)
3 in (76.2 mm)
Maximum roll outer diameter
(not to exceed)
12.6 in (320 mm)
7.48 in (190 mm)
7.48 in (190 mm)
Average # of units per roll
15,000 verified
4,000 verified
2,000 verified
Rev
00
00
00
Toll free US 866-903- RFID (7343) / rfid.info@averydennison.com
International +1-770-965-0807
