25
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
High - Q NP0 Chip Capacitors
Temperature Coefficient: 0% ± 30PPM /°C, -55°C to 125°C
Dissipation Factor: .0002 (0.02%) max, 25°C
0201 Quality Factor: Q > 1,000 @ 1MHz, Typical 10,000
Quality Factor: Q > 5,000 @ 1MHz
Ageing: None
Insulation Resistance: 1,000 GW @ 25°C, 50 mA max
125°C IR is 10% of 25°C, 50 mA max
Dielectric Strength: 2.5 x WVDC Min., 25°C, 50 mA max
Test Parameters: 1MHz ± 50kHz, 1.0 ± 0.2 VRMS, 25°C
• Capacitance available from 0.1 pF to 220 pF.
• Available in 0201, 0402, 0603 and 0805 sizes.
• Nickel Barrier / Tinned Termination.
0201, 0402, 0603 & 0805 Maximum ESR
0.25
0.20
0.10
0.05
100 300 500 800 1000
Frequency (MHz)
ESR (ohms)
2.7pF 5.6pF 10pF 47pF 100pf
0402 10pF
Features
10
1
0.1
1 10 100 1000
Capacitance (pF)
Typical Series Resonant Frequency
Frequency (GHz)
0603
0805
0402
0201
Characteristics
RF Performance Characteristics
All components in this section are RoHS compliant per the EU directives and definitions.
C0805 HQN 201 — 101 J N h E
Series Dielectric Rated Voltage Capacitance Tolerance Termination Marking Packaging
See Chart Code 250 = 25V (pico - Farads) Code: N = Nickel barrier, 6 = EIA “J” Code E = Embossed Tape
High - Q NP0 500 = 50V 1st 2 digits **A = ± 0.05 pF Tinned Termination “Leave blank if P = Paper Tape
101 = 100V are significant *B = ± 0.1 pF G = Gold over No Marking”
151 = 150V followed by number *C = ± 0.25 pF Nickel
201 = 200V of zeroes. *D = ± 0.5 pF Standard termination finish for this product
251 = 250V F = ± 1% is 100% matte Tin (Sn)
G = + 2%
J = ± 5%
K = ± 10%
*For capacitance values below 10 pF only
**For capacitance values of 1.8 pF or less.
L
E/B
w
T
Electrodes
Nickel Barrier Layer
Silver Base
Tin Plating
How To Order
Mechanical Characteristics
Voltage and Capacitance Range
PHYSICAL
DIMENSIONS 0201* 0402 0603 0805
LENGTH ± .010" .024 .040 .060 .080
(Millimeters) (0.6) (1.02±0.1) (1.52) (2.03)
WIDTH ± .010" .012 .020 .030 .050
(Millimeters) (0.3) (0.51±0.1) (0.76) (1.27)
THICKNESS MAX .012 .020 .035 .050
(Millimeters) (0.3) (0.51±0.1) (0.90) (1.27)
ENDBAND MAX .006 .010 .015 .020
(Millimeters) (0.15) (0.25) (0.38) (.508)
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
26
* 0402 size
cannot be
marked.
CASE
SIZE Voltage
0.1pF
0.2pF
0.3pF
0.4pF
0.5pF
0.6pF
0.7pF
0.8pF
0.9pF
1.0pF
1.2pF
1.5pF
1.8pF
2.2pF
2.7pF
3.3pF
3.9pF
4.7pF
5.6pF
6.8pF
8.2pF
9.1pF
10pF
12pF
15pF
18pF
20pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
120pF
150pF
180pF
220pF
270pF
330pF
390pF
0201 25V
0402 25V
50V
0603
50V
100V
200V
250V
0805
100V
200V
250V
Above selection indicates standard product offering. Contact your sales representative for C/V requirements which may not be shown.
* 0201 dimensions are ± .001
