FIRADEC 67 CONDENSATEURS AU TANTALE TANTALUM CAPACITORS Condensateurs tantale a electrolyte solide Pour circuit hybride CMS - Montage en surface Polarises Solid tantalum capacitors To be used in hybrid circuits SMD - Surface mount Polarised types CTC 1 (ESCC 3011 types 1005 a/up to 2815) CARACTERISTIQUES ELECTRIQUES ET CLIMATIQUES ELECTRICAL AND CLIMATIC CHARACTERISTICS CTC 1 CECC 30801-001 ESCC3011/001 up to 008 -55C +125C 56 jours / days 0,1F...100F 20%...10% 4V...50V Specification particuliere Temperature d'utilisation Chaleur humide Gamme de capacite Tolerance Gamme de tension C / C maximum a -55C C / C maximum a +85C C / C maximum a +125C Detail specification Operating temperature Damp heat Capacitance range Tolerance Voltage range Max capacitance change at -55C Max capacitance change at +85CMax capacitance change at +125C -12% +10% +15% Tg maximum a +20C Tg maximum a -55C Tg maximum a +85C Tg maximum a +125C voir / see / voir / see / voir / see / voir / see / table table table table Maximum DF at +20C Maximum DF at -55C Maximum DF at +85C Maximum DF at +125C Courant de fuite max a +20C Courant de fuite max a +85C Courant de fuite max a +125C voir / see / table voir / see / table voir / see / table Max leakage current at +20C Max leakage current at +85C Max leakage current at +125C RSE maximum (100kHz) a 20C - Max. ESR at (100kHz) +20C Tenue en charge - decharge non / no High surge current Tension inverse max a +20C Tension inverse max a +85C Tension inverse max a +125C 15 % U R 5 % UR 1 % UR Max reverse voltage at +20C Max reverse voltage at +85C Max reverse voltage at +125C Surtension max a +85C Surtension max a +125C 1,3 x U R 1,3 x U C Max surge voltage at +85C Max surge voltage at +125C DIMENSIONS en mm DIMENSIONS in mm Pour un etamage a chaud, ajouter 0,4 mm a toutes les dimensions For hot solder dipped termination, add 0,4 mm to all dimensions Boitier IEC L1 W H L2 Case code L1 x W 0,4 0,4 0,4 0,15 A 10.05 2,54 1,27 1,27 0,76 B 15.05 3,81 1,27 1,27 0,76 C 20.05 5,08 1,27 1,27 0,76 D 15.10 3,81 2,54 1,27 0,76 E 20.10 5,08 2,54 1,27 0,76 F 22.13 5,59 3,43 1,78 0,76 G 26.11 6,73 2,79 2,79 1,27 H 28.15 7,24 3,81 2,79 1,27 L2 L2 W L1 Anode (+) Indication de polarite donnee par le fil de tantale au centre de la sortie positive Depassement Max. : (0,38) Polarity indication is given by anode tantalum wire protruding in the center of the positive end cap. Terminal Max. lenght : (0,38) FIRADEC 68 CONDENSATEURS AU TANTALE TANTALUM CAPACITORS CTC 1 CAPACITE NOMINALE RATED CAPACITANCE VALEURS STANDARD - CARACTERISTIQUES ELECTRIQUES STANDARD RATINGS - ELECTRICAL CHARACTERISTICS BOITIER MODELES CASE CODE TYPES 100Hz+20C (F) COURANTDE FUITE MAX. MAX LEAKAGE CURRENT +20C (A) 2,2 4,7 6,8 10 15 33 68 100 A B C D E F G H 1,5 3,3 4,7 6,8 10 22 47 68 A B C D E F G H 1 2,2 3,3 4,7 6,8 15 33 47 A B C D E F G H 0,68 1,5 2,2 3,3 4,7 10 22 33 +85C/+125C (A) * +20C (%) TANG. MAX. MAX. D.F 100Hz -55C/+85C (%) TENSION NOMINALE (+85C) 4 V - TENSION DE CATEGORIE (+125C) 2,5 V RATED VOLTAGE (+85C) 4 V - CATEGORY VOLTAGE (+125C) 2,5 V CTC1 1,0 1,0 8 CTC1 1,0 1,9 8 CTC1 1,0 2,7 8 CTC1 1,0 4,0 8 CTC1 1,0 6,0 8 CTC1 1,3 13,2 8 CTC1 2,7 27,2 8 CTC1 4,0 40,0 8 TENSION NOMINALE (+85C) 6,3 V - TENSION DE CATEGORIE (+125C) 4 V RATED VOLTAGE (+85C) 6,3 V - CATEGORY VOLTAGE (+125C) 4 V +125C (%) 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 CTC1 1,0 1,0 8 CTC1 1,0 2,1 8 CTC1 1,0 3,0 8 CTC1 1,0 4,3 8 CTC1 1,0 6,3 8 CTC1 1,4 13,9 8 CTC1 3,0 29,6 8 CTC1 4,3 42,8 8 TENSION NOMINALE (+85C) 10 V - TENSION DE CATEGORIE (+125C) 6,3 V RATED VOLTAGE (+85C) 10 V - CATEGORY VOLTAGE (+125C) 6,3 V CTC1 1,0 1,0 6 CTC1 1,0 2,2 6 CTC1 1,0 3,3 6 CTC1 1,0 4,7 6 CTC1 1,0 6,8 6 CTC1 1,5 15,0 6 CTC1 3,3 33,0 6 CTC1 4,7 47,0 6 TENSION NOMINALE (+85C) 16 V - TENSION DE CATEGORIE (+125C) 10 V RATED VOLTAGE (+85C) 16 V - CATEGORY VOLTAGE (+125C) 10 V 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 A B C D E F G H CTC1 1,0 1,1 6 CTC1 1,0 2,4 6 CTC1 1,0 3,5 6 CTC1 1,0 5,3 6 CTC1 1,0 7,5 6 CTC1 1,6 16,0 6 CTC1 3,5 35,2 6 CTC1 5,3 52,8 6 TENSION NOMINALE (+85C) 20 V - TENSION DE CATEGORIE (+125C) 13 V RATED VOLTAGE (+85C) 20 V - CATEGORY VOLTAGE (+125C) 13 V 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 0,47 1 1,5 2,2 3,3 6,8 15 22 A B C D E F G H CTC1 1,0 1,0 6 CTC1 1,0 2,0 6 CTC1 1,0 3,0 6 CTC1 1,0 4,4 6 CTC1 1,0 6,6 6 CTC1 1,4 13,6 6 CTC1 3,0 30,0 6 CTC1 4,4 44,0 6 TENSION NOMINALE (+85C) 25 V - TENSION DE CATEGORIE (+125C) 16 V RATED VOLTAGE (+85C) 25 V - CATEGORY VOLTAGE (+125C) 16 V 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 0,33 0,68 1 1,5 2,2 4,7 6,8 10 15 A B C D E F G G H CTC1 1,0 1,0 6 CTC1 1,0 1,7 6 CTC1 1,0 2,5 6 CTC1 1,0 3,8 6 CTC1 1,0 5,5 6 CTC1 1,2 11,8 6 CTC1 1,7 17,0 6 CTC1 2,5 25,0 6 CTC1 3,8 37,5 6 TENSION NOMINALE (+85C) 40 V - TENSION DE CATEGORIE (+125C) 25 V RATED VOLTAGE (+85C) 40V - CATEGORY VOLTAGE (+125C) 25V 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 0,22 0,47 0,68 1 1,5 3,3 4,7 6,8 10 A B C D E F G H H 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 1,0 1,0 1,0 1,0 1,0 1,3 1,9 2,7 4,0 1,0 1,9 2,7 4,0 6,0 13,2 18,8 27,2 40,0 6 6 6 6 6 6 6 6 6 FIRADEC 69 CONDENSATEURS AU TANTALE TANTALUM CAPACITORS CTC 1 CAPACITE NOMINALE RATED CAPACITANCE VALEURS STANDARD - CARACTERISTIQUES ELECTRIQUES STANDARD RATINGS - ELECTRICAL CHARACTERISTICS BOITIER MODELES CASE CODE TYPES 100Hz+20C (F) COURANTDE FUITE MAX. MAX LEAKAGE CURRENT +20C (A) +85C / +125C (A) * +20C (%) TANG. MAX. MAX. D.F 100Hz -55C / +85C (%) +125C (%) TENSION NOMINALE (+85C) 50 V - TENSION DE CATEGORIE (+125C) 32 V RATED VOLTAGE (+85C) 50V - CATEGORY VOLTAGE (+125C) 32 V 0,1 0,15 0,22 0,33 0,47 0,68 1 1,5 2,2 3,3 4,7 A A B B C D E F F G H CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 CTC1 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,1 1,7 2,4 1,0 1,0 1,1 1,7 2,4 3,4 5,0 7,5 11,0 16,5 23,5 6 6 6 6 6 6 6 6 6 6 6 12 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 Notes : - La tension 20V est hors gamme CECC Notes : - Voltage 20V is out of CECC range - * Mesure sous la tension de categorie UC a +125C - * Measured with category voltage UC @ +125C Terminaisons Les embouts de sorties sont en Nickel nickele, sur lesquels quatre finitions sont possibles : - Finition standard : -G: flash Or pour report par colle epoxy et creme a braser - Sur demande : - G+ : depot Or renforce pour ball bonding thermocompression ou soudure ultrasonique -T: etamage electrolytique (90 Sn - 10 Pb) -F: etamage electrolytique (100% Sn) Terminations Terminations are made of Nickel, nickel plated, on which four plating finishes may be achieved : - Standard termination : - G : gold plating for standard epoxy bonding & sol dering paste - Upon request : - G+ : additional gold plating for ball-bonding or ultrasonic bonding -T: tinning electrolytic (90 Sn - 10 Pb) -F: tinning electrolytic (100% Sn) Conditionnement - Standard : Vrac - Option : Mise en bande et bobine Ajouter le suffixe R apres la designation. Libelle de commande Ex. : CTC1 E 1F 10% 50V G R NOTES Packing - Standard : - Optional : Bulk Tape & Reel When ordering add the suffix R just after the termination code. How to order Ex. : CTC1 E 1F 10% 50V G R FIRADEC 70 CONDENSATEURS AU TANTALE TANTALUM CAPACITORS MISE EN BANDE ET BOBINE TAPE AND REEL PACKAGING (selon CEI 286-3) (per IEC 286-3) P0 D0 P2 E L T F W - Bande de couverture Cover tape + - B0 + G D1 K0 P1 A0 Sens de deroulement Direction of unreeling Dimensions des bandes (mm) Tape dimensions (mm) W 0,3 E 0,1 F 0,05 P0 0,1 D0 +0,1 -0 D1 0,1 G min. P1 0,1 P2 0,05 8,0 12,0 16,0 1,75 1,75 1,75 3,5 5,5 7,5 4,0 4,0 4,0 1,5 1,5 1,5 1,0 1,5 2,0 0,75 0,75 0,75 4,0/8,0 8,0 8,0 2,0 2,0 2,0 Notes : A0 B0 K0 sont definis par la taille du composant Notes : A0 B0 K0 are defined by component size Diametre de la bobine : standard 180 mm (nominal) Diametre du trou central : 12,8 mm Reel diameter : 180 mm (nominal) Diameter of central hole : 12,8 mm Largeur de bande, quantite maximum par bobine, position du composant et pas (P1) Tape width, maximum per reel, components posi tion and pitch (P 1) Boitier Case code Largeur de Quantite Bande par bobine Tape Quantity Width per Reel Position Pas Position Pitch P1 (mm) A B C D E F G H 8,0 8,0 8,0 8,0 8,0 12,0 16,0 16,0 Note : La quantite minimum par bobine est de 50% des quantites mentionnees ci-dessus Position du composant T = Transversale (sortie + opposee aux picots d'entrainement) L = Longitudinale (sortie + dans le sens de deroulement) (mm) 2800 1400 1400 1400 1400 1000 600 600 T L L L L T T T 4,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 Note : The minimum quantity per reel is 50% of the above mentioned one Component position T = Transversal (+ termination away from the sprocket hole) L = Longitudinal (+ termination in the direction of unreeling)