B-22 APEM www.apem.com
B
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Distinctive features and specifications
❑
Illuminated or non-illuminated
❑
Tactile feedback
❑
Wide variety of configurations
❑
Flat round actuator for optional marking
❑
Sealed to IP67
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
• Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load (gold plated silver contacts):
5A 28VDC, 70.000 cycles
0,2A 48VDC, 500.000 cycles
0,5A 48VAC, 500.000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.500 Vrms
• Contact bounce : 10 ms
MATERIALS
• Case : thermoplastic UL94-V0
• Actuator :
polyamide
6/6
• Bushing/bezel : zinc die-cast
(zamac), black painted
• Contacts : silver, gold plated (std)
brass, gold plated (for option 104)
• Multi-wire lead AWG20,
section 0,6 mm2
•
LED wire : AWG26, section 0,12 mm2
• Lens : polycarbonate
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Panel thickness : 1,5 mm (.059) min.
4 mm (.157 max.)
• Total travel :
Funct. 3 : 1,7 mm (.067) +/- 0,3 mm
Funct. 5 : 1,3 mm (.051) +/- 0,3 mm
• Typical operating force : 6N +/- 2N
• Mechanical life : 1.000.000 cycles
• Torque : 1,5 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
LED forward current
LED COMPONENT SPECIFICATIONS
LED colour
Forward current
Super red (L0S) 20mA
20mA
20mA
20mA
Typ. forward voltage Max. forward voltage
2,1V
2,1V
2,1V
3,2V
Yellow (L0Y)
Green (L0G)
Blue (L0B)
20mA 3,35V
2,3V
2,3V
2,3V
3,8V
4,25VWhite (L0W)
AGENCY APPROVAL
2A 125VAC/250VAC
File E83438
Availability : consult factory for
details of approved models.
Marking : to order switches marked
UL, complete ordering format.
MOUNTING
Panel cut-out Matrix mounting
Back of panel space requirement
Ø13.60
(.535DIA)
(.531DIA)
Ø13.50
12.90
(.507)
1
1.50min-4Max
(.059 min-.157max)
20.00
(.787)
20.00
(.787)(.787)
20.00
(.688)
17.50
➀ O-ring
UG1006-A
APEM www.apem.com B-23
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Overview
IP
SERIES
Actuator shape
CSquare
RRound, curved
PRound, flat
Terminals
SSolder lugs
FFlying leads
PStraight PC
Z1 Quick-connect
(non-ill., NO only )
Electrical function
3Normally open
(NO)
5NC/NO combined
(non-illuminated)
Actuator colour
1Blue
1/4 Dark blue
2Black
3Green
5Yellow
6Red
7/1 White
8Bright chrome
9Orange
Contacts
AD Silver, gold
plated (standard)
CD Brass, gold
plated (option 104)
LED colour
Blank Non-illum.
L0S Super red
L0Y Yellow
L0G Green
L0B Blue
L0W White
ABOUTTHISSERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
A sealing boot is available to protect the switches against frost and sand. It is presented after the IA series and in section H.
Mounting accessories : Standard hardware supplied : 1 hex nut 14 mm (.551) across flats and 1 O-ring.
Hex nut part number U166.
Packaging unit : 25 pieces
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Options
100 Satin chrome
bezel
101 Bright chrome
bezel
104 High actuator
(non-illum. round
models only)
Option 104
If combined with electrical function 5 (NC/NO), this
option should be ordered with CD contacts (brass, gold
plated). Current/voltage rating : 100mA 30VDC
Approval
UL
Consult factory for
detail of approved
models.
B
B-24 APEM www.apem.com
B
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Square - illuminated
MODEL
STRUCTURE
• High brightness illumination
• Five LED colours
• Tin plated LED terminals
Solder lug terminals
Ø12.00x0.75SI
(.047)
1.50
5.20
(.015)
(.204)
(.059)
2.00
(.078)
5.08
(.200)
(.267)
1.20
(.251)
6.40 6.80
0.40
EPOXY
(.472DIAx0.75IS)
5.00
(.196)
1.50 Min
(.059 Min)
12.00
(.472SQ)
17.50
(.688SQ)
2.00
(.078)
6.10
(.240)
➞Flat
IPC3SAD Normally Open
Sealed flying lead terminals
Ø12.00x0.75SI
500±10
(19.68±.393)
(.688SQ)
1.50 Min
(.059 Min)
16.00 Max
(.629 Max)
6.80
(.267)
(.472DIAx0.75IS)
5.00
(.196)
12.00
(.472SQ)
(.078)
2.00
17.50
➞Flat
IPC3FAD Normally Open
Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode(-)
Cathode
(-)
LED
ACTUATOR COLOUR
1: blue - 1/4 : dark blue - 2: black - 3: green - 5: yellow
6: red - 7/1 : white - 8: bright chrome - 9: orange
LED COLOUR
OPTIONS
L0S : red - L0Y : yellow - L0G : green - L0B : blue
L0W : white
100 : Satin chrome bezel
101 : Bright chrome bezel
APPROVAL
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
Also available with straight PC terminals : IPC3PAD
LED colour is indicated by the bottom of the switch.
APEM www.apem.com B-25
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Square - non-illuminated
MODEL
STRUCTURE
• Double function (NC/NO combined)
with a short behind-panel depth
Solder lug terminals
Ø12.00x0.75SI
(.047)
1.50
5.20
(.204)
(.059)
2.00
(.078)
5.08
(.200)
(.015)
(.472DIAx0.75IS)
6.40
(.251)
1.20
6.80
(.267)
0.40
EPOXY
5.00
1.50 Min
(.196)
12.00
(.472SQ)
(.059 Min)
(.078)
17.50
(.688SQ)
2.00
NO NO
NC
NC/NONO
➞Flat
IPC3SAD Normally Open
IPC5SAD NC/NO combined
Sealed flying lead terminals
Ø12.00x0.75SI
500±10
(19.68±.393)
1.50 Min
(.059 Min)
(.472DIAx0.75IS)
(.267)
16.00 Max
(.629 Max)
6.80 5.00
(.196)
12.00
(.472SQ)
(.078)
2.00
17.50
(.688SQ)
NO NC/NO
➞Flat
IPC3FAD Normally Open
IPC5FAD NC/NO combined
ACTUATOR COLOUR
1: blue - 1/4 : dark blue -2: black - 3: green - 5: yellow - 6: red - 7/1 : white - 8: bright chrome - 9: orange
OPTIONS
100 : Satin chrome bezel
101 : Bright chrome bezel
Wire colours (NC/NO) : black : NO, blue : NC
Function 3 (N0) Function 5 (NC/NO)
5.20
(.204)
1.00
(.039)
4.55
(.179)
1.20
2.80 (.047)
(.110)
8.70
2.40
(.342)
(.094)
Straight PQuick-connect Z1
Also available with straight PC terminals : IPC3PAD (NO) or IPC5PAD (NC/NO)
and quick-connect terminals : IPC3Z1AD (NO only)
APPROVAL
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
B
B-26 APEM www.apem.com
B
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Round - illuminated
MODEL
STRUCTURE
• High brightness illumination
• Five LED colours
• Tin plated LED terminals
Solder lug terminals
Ø12.00x0.75SI
Ø17.50
(.688DIA)
Ø12.00
(.472DIA)
(.047)
1.50
(.059)
(.204)
(.015)
5.20
(.200)
(.078)
2.00 5.08
EPOXY
0.40
(.472DIAx0.75IS)
(.267)(.251)
1.20
6.806.40
1.50 Min
5.00
(.059 Min)
(.196)
(.078)
2.00
6.10
(.240)
➞Flat
IPR3SAD Normally Open
Sealed flying lead terminals
Ø12.00x0.75SI
(19.68±.393)
500±10
Ø12.00
(.472DIA)
(.688DIA)
Ø17.50
(.196)
5.00
(.059 Min)
1.50 Min
2.00
(.078)
(.472DIAx0.75IS)
16.00 Max
(.629 Max) (.267)
6.80
➞Flat
IPR3FAD Normally Open
Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode(-)
Cathode
(-)
LED
ACTUATOR COLOUR
1: blue - 1/4 : dark blue - 2: black - 3: green - 5: yellow
6: red - 7/1 : white - 8: bright chrome - 9: orange
LED COLOUR
OPTIONS
L0S : red - L0Y : yellow - L0G : green - L0B : blue
L0W : white
100 : Satin chrome bezel
101 : Bright chrome bezel
APPROVAL
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
Also available with straight PC terminals : IPR3PAD
LED colour is indicated by the bottom of the switch.
Cathode
(-)
LED
APEM www.apem.com B-27
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Round - non-illuminated
Function 3 (NO) Function 5 (NC/NO)
MODEL
STRUCTURE
• Double function (NC/NO combined)
with a short behind-panel depth
Solder lug terminals
NO
NO
NC
NC/NONO
2.00
(.078)
(.059 Min)
1.50 Min
(.196)
5.00
(.472DIAx0.75IS)
0.40
EPOXY
(.267)
6.80
1.20
6.40
(.251)
5.08
(.200)
2.00
(.078)
5.20
(.015)
(.204)
(.059)
1.50
(.047)
(.472DIA)
Ø12.00 (.688DIA)
Ø17.50
Ø12.00x0.75SI
➞Flat
Curved actuator, NO
IPR3SAD
Curved actuator, NC/NO
IPR5SAD
Flat actuator, NO
IPP3SAD
Flat actuator, NC/NO
IPP5SAD
Sealed flying lead terminals
NC/NONO
(.472DIAx0.75IS)
6.80
(.267)(.519)
13.20
(.078)
2.00
1.50 Min
(.059 Min)
5.00
(.196)
Ø17.50
(.688DIA)
(.472DIA)
Ø12.00
500±10
(19.68±.393)
Ø12.00x0.75SI
➞Flat
Curved actuator, NO
IPR3FAD
Curved actuator, NC/NO
IPR5FAD
Flat actuator, NO
IPP3FAD
Flat actuator, NC/NO
IPP5FAD
ACTUATOR COLOUR
1: blue - 1/4 : dark blue -2: black - 3: green - 5: yellow
6: red - 7/1 : white - 8: bright chrome - 9: orange
Wire colours (NC/NO) : black : NO, blue : NC
100 : Satin chrome bezel
101 : Bright chrome bezel
104 : High actuator - If combined with function 5
(NC/NO), order with CD contacts (instead of AD contacts).
OPTIONS
5.20
(.204)
1.00
(.039)
4.55
(.179)
1.20
2.80 (.047)
(.110)
8.70
2.40
(.342)
(.094)
Straight PQuick-connect Z1
Also available with straight PC terminals : IP•3PAD (NO) or IP•5PAD (NC/NO)
and quick-connect terminals : IP•3Z1AD (NO only)
Actuator marking available on IPP models (symbol 10 mm max.).
On request.
104 IPR 104 IPP
Ø12.00
(.472DIA)
(.185)
4.70
APPROVAL
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
B