IP series Pushbutton switches for harsh environments - bushing O 12 mm - momentary Distinctive features and specifications UG1006-A Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 B ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 IP69K according to DIN 40050-9 (non-illuminated) with cap U5125 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule) * Operating temperature : -40C to +85C ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load (gold plated silver contacts): 5A 28VDC, 70.000 cycles 0,2A 48VDC, 500.000 cycles 0,5A 48VAC, 500.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.500 Vrms * Contact bounce : 10 ms LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 2,1V 2,3V Yellow (L0Y) 20mA 2,1V 2,3V Green (L0G) 20mA 2,1V 2,3V Blue (L0B) 20mA 3,2V 3,8V White (L0W) 20mA 3,35V 4,25V * Panel thickness : 1,5 mm (.059) min. 4 mm (.157 max.) * Total travel : Funct. 3 : 1,7 mm (.067) +/- 0,3 mm Funct. 5 : 1,3 mm (.051) +/- 0,3 mm * Typical operating force : 6N +/- 2N * Mechanical life : 1.000.000 cycles * Torque : 1,5 Nm max. applied to nut * Soldering : 320C max. for 3 sec. MATERIALS * Case : thermoplastic UL94-V0 * Actuator : polyamide 6/6 * Bushing/bezel : zinc die-cast (zamac), black painted * Contacts : silver, gold plated (std) brass, gold plated (for option 104) * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy AGENCY APPROVAL 2A 125VAC/250VAC File E83438 Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete ordering format. A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current MOUNTING Matrix mounting 12.90 (.507) 20.00 (.787) 1 O13.60 (.535DIA) O-ring B-22 20.00 (.787) Back of panel space requirement 20.00 (.787) 17.50 (.688) 1.50min-4Max (.059 min-.157max) Panel cut-out O13.50 (.531DIA) www.apem.com APEM IP series Pushbutton switches for harsh environments - bushing O 12 mm - momentary Overview IP Electrical function Actuator shape SERIES C R P Square Round, curved Round, flat 3 5 Normally open (NO) NC/NO combined (non-illuminated) Terminals S F P Z1 Solder lugs Flying leads Straight PC Quick-connect (non-ill., NO only ) Contacts AD Silver, gold plated (standard) CD Brass, gold plated (option 104) B Actuator colour 1 1/4 2 3 5 6 7/1 8 9 Blue Dark blue Black Green Yellow Red White Bright chrome Orange LED colour Blank L0S L0Y L0G L0B L0W Non-illum. Super red Yellow Green Blue White Approval Options 100 101 104 Satin chrome bezel Bright chrome bezel High actuator (non-illum. round models only) UL Consult factory for detail of approved models. Option 104 If combined with electrical function 5 (NC/NO), this option should be ordered with CD contacts (brass, gold plated). Current/voltage rating : 100mA 30VDC ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. A sealing boot is available to protect the switches against frost and sand. It is presented after the IA series and in section H. Mounting accessories : Standard hardware supplied : 1 hex nut 14 mm (.551) across flats and 1 O-ring. Hex nut part number U166. Packaging unit : 25 pieces APEM www.apem.com B-23 IP series Pushbutton switches for harsh environments - bushing O 12 mm - momentary Square - illuminated * High brightness illumination * Five LED colours * Tin plated LED terminals LED Cathode (-) 1.50 (.059) 1.50 Min (.059 Min) 17.50 (.688SQ) O12.00x0.75SI (.472DIAx0.75IS) EPOXY 1.20 (.047) 0.40 (.015) 2.00 (.078) 5.08 (.200) 5.20 (.204) Normally Open 6.10 (.240) IPC3SAD 6.40 6.80 (.251) (.267) 5.00 (.196) 12.00 (.472SQ) 2.00 (.078) Flat Solder lug terminals 5.00 (.196) O12.00x0.75SI (.472DIAx0.75IS) 50010 (19.68.393) Normally Open 17.50 (.688SQ) 6.80 (.267) IPC3FAD 12.00 (.472SQ) 2.00 (.078) Flat Sealed flying lead terminals 1.50 Min (.059 Min) Also available with straight PC terminals : IPC3PAD LED colour is indicated by the bottom of the switch. 16.00 Max (.629 Max) B MODEL STRUCTURE Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode(-) ACTUATOR COLOUR LED COLOUR 1 : blue - 1/4 : dark blue - 2 : black - 3 : green - 5 : yellow 6 : red - 7/1 : white - 8 : bright chrome - 9 : orange L0S : red - L0Y : yellow - L0G : green - L0B : blue L0W : white OPTIONS APPROVAL 100 : Satin chrome bezel 101 : Bright chrome bezel UL Consult factory for details of approved models. To order switches marked UL, complete above box with "UL". B-24 www.apem.com APEM IP series Pushbutton switches for harsh environments - bushing O 12 mm - momentary Square - non-illuminated * Double function (NC/NO combined) with a short behind-panel depth 8.70 (.342) 2.40 (.094) Quick-connect Z1 4.55 (.179) 5.20 (.204) Straight P 1.00 (.039) Function 3 (N0) 1.20 (.047) 2.80 (.110) Function 5 (NC/NO) MODEL STRUCTURE B Normally Open IPC5SAD NC/NO combined 1.50 Min (.059 Min) O12.00x0.75SI (.472DIAx0.75IS) NO EPOXY 1.50 (.059) 17.50 (.688SQ) 1.20 (.047) 0.40 (.015) 2.00 (.078) 5.08 (.200) NO NO NC 5.20 (.204) IPC3SAD 6.40 6.80 (.251) (.267) 5.00 (.196) 12.00 (.472SQ) 2.00 (.078) Flat Solder lug terminals NC/NO 5.00 (.196) NC/NO combined 17.50 (.688SQ) O12.00x0.75SI (.472DIAx0.75IS) 50010 (19.68.393) IPC5FAD 6.80 (.267) Normally Open 16.00 Max (.629 Max) IPC3FAD 12.00 (.472SQ) 2.00 (.078) Flat Sealed flying lead terminals 1.50 Min (.059 Min) Also available with straight PC terminals : IPC3PAD (NO) or IPC5PAD (NC/NO) and quick-connect terminals : IPC3Z1AD (NO only) NO NC/NO Wire colours (NC/NO) : black : NO, blue : NC ACTUATOR COLOUR 1 : blue - 1/4 : dark blue -2 : black - 3 : green - 5 : yellow - 6 : red - 7/1 : white - 8 : bright chrome - 9 : orange OPTIONS APPROVAL 100 : Satin chrome bezel 101 : Bright chrome bezel UL APEM Consult factory for details of approved models. To order switches marked UL, complete above box with "UL". www.apem.com B-25 IP series Pushbutton switches for harsh environments - bushing O 12 mm - momentary Round - illuminated * High brightness illumination * Five LED colours * Tin plated LED terminals LED Cathode (-) LED Cathode (-) 1.50 Min (.059 Min) O17.50 (.688DIA) O12.00x0.75SI (.472DIAx0.75IS) 1.50 (.059) EPOXY 1.20 (.047) 0.40 (.015) 2.00 (.078) 5.08 (.200) 5.20 (.204) Normally Open 6.10 (.240) IPR3SAD 6.40 6.80 (.251) (.267) 5.00 (.196) O12.00 (.472DIA) 2.00 (.078) Flat Solder lug terminals 5.00 (.196) O12.00x0.75SI (.472DIAx0.75IS) 50010 (19.68.393) Normally Open O17.50 (.688DIA) 6.80 (.267) IPR3FAD O12.00 (.472DIA) 2.00 (.078) Flat Sealed flying lead terminals 1.50 Min (.059 Min) Also available with straight PC terminals : IPR3PAD LED colour is indicated by the bottom of the switch. 16.00 Max (.629 Max) B MODEL STRUCTURE Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode(-) ACTUATOR COLOUR LED COLOUR 1 : blue - 1/4 : dark blue - 2 : black - 3 : green - 5 : yellow 6 : red - 7/1 : white - 8 : bright chrome - 9 : orange L0S : red - L0Y : yellow - L0G : green - L0B : blue L0W : white OPTIONS APPROVAL 100 : Satin chrome bezel 101 : Bright chrome bezel UL Consult factory for details of approved models. To order switches marked UL, complete above box with "UL". B-26 www.apem.com APEM IP series Pushbutton switches for harsh environments - bushing O 12 mm - momentary Round - non-illuminated * Double function (NC/NO combined) with a short behind-panel depth Function 3 (NO) 8.70 (.342) 2.40 (.094) Quick-connect Z1 4.55 (.179) 5.20 (.204) Straight P 1.00 (.039) Function 5 (NC/NO) 2.80 (.110) 1.20 (.047) MODEL STRUCTURE B 6.40 6.80 (.251) (.267) Flat actuator, NO IPP3SAD Flat actuator, NC/NO IPP5SAD O17.50 (.688DIA) O12.00x0.75SI (.472DIAx0.75IS) NO 1.50 (.059) 1.20 (.047) 2.00 (.078) NO NC EPOXY 0.40 (.015) 5.20 (.204) Curved actuator, NO IPR3SAD Curved actuator, NC/NO IPR5SAD 1.50 Min (.059 Min) 5.00 (.196) O12.00 (.472DIA) 2.00 (.078) Flat Solder lug terminals 5.08 (.200) NO NC/NO Also available with straight PC terminals : IP*3PAD (NO) or IP*5PAD (NC/NO) and quick-connect terminals : IP*3Z1AD (NO only) O17.50 (.688DIA) 6.80 (.267) Curved actuator, NO IPR3FAD Curved actuator, NC/NO IPR5FAD 1.50 Min (.059 Min) 5.00 (.196) O12.00 (.472DIA) 2.00 (.078) Flat Sealed flying lead terminals Flat actuator, NO IPP3FAD Flat actuator, NC/NO IPP5FAD NO 50010 (19.68.393) 13.20 (.519) O12.00x0.75SI (.472DIAx0.75IS) NC/NO Wire colours (NC/NO) : black : NO, blue : NC OPTIONS 1 : blue - 1/4 : dark blue -2 : black - 3 : green - 5 : yellow 6 : red - 7/1 : white - 8 : bright chrome - 9 : orange 100 : Satin chrome bezel 101 : Bright chrome bezel 104 : High actuator - If combined with function 5 (NC/NO), order with CD contacts (instead of AD contacts). APPROVAL UL Consult factory for details of approved models. To order switches marked UL, complete above box with "UL". APEM O12.00 (.472DIA) 104 IPR www.apem.com O12.00 (.472DIA) 4.70 (.185) Actuator marking available on IPP models (symbol 10 mm max.). On request. 104 4.70 (.185) ACTUATOR COLOUR IPP B-27