PX1002 - MURATA MANUFACTURING - Datasheet.Directory

PX1002 (R) 2/12/15 Page 1 of 5 www.murata.com

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units

Nominal Center Frequency fC186.850 MHz

Passband Insertion Loss at fc IL 3 4.0 dB

3 dB Passband BW3

1, 2

±12 ±25 kHz

Amplitude Ripple over fc ±15 kHz 1.0 dBP-P

Group Delay Variation over fc ±10 kHz GDV 6.0 µsP-P

Third-Order Intermod. for -20 dBm tones at fc ±60 & 120 kHz -95 dBm

Rejection fc ±60 kHz

1, 2, 3

11 16

dBfc -880 kHz to fc -940 kHz 65

Ultimate 65

Operating Temperature Range TA1-20 +70°C

Impedance Matching to 50 Ω unbalanced External L-C

Case Style SM13365-12 13.3 X 6.5 mm Nominal Footprint

Lid Symbolization (YY=year, WW=week) See note 4 RFM PX1002 YYWW

Standard 7” Reel Quantity 500 units

Standard 13” Reel Quantity 1000 units

SM13365-12

• Designed for TDMA IS-54 Receiver IF Applications

• Low Insertion Loss

• Excellent Selectivity

• Hermetic 13.3 X 6.5 mm Surface-mount Case

• Unbalanced Input and Output

• Complies with Directive 2002/95/EC (RoHS)

Absolute Maximum Ratings

Rating Value Units

Maximum Incident Power in Passband +10 dBm

Maximum DC Voltage Between any 2 terminals 30 VDC

Storage Temperature Range -40 to +85 °C

Suitable for Lead-free Soldering - Maximum Soldering Profile 260 °C for 30 s

86.85 MHz

SAW Filter

PX1002

1. Unless noted otherwise, all specifications apply over the operating temperature

range with filter soldered to the specified demonstration board with impedance

matching to 50 Ω and measured with 50 Ω network

analyzer.

2. Unless noted otherwise, all frequency specifications are referenced to the

nominal center frequency, fc.

3. Rejection is measured as attenuation below the minimum IL point in the

passband. Rejection in final user application is dependent on PCB layout and

external impedance matching design. See Application Note No. 42 for details.

4. "LRIP" or "L" after the part number indicates "low rate initial production" and

"ENG" or "E" indicates "engineering prototypes."

5. The design, manufacturing process, and specifications of this filter are subject

to change.

6. Either Port 1 or Port 2 may be used for either input or output in the design.

However, impedances and impedance matching may vary between Port 1 and

Port 2, so that the filter must always be installed in one direction per the circuit

design.

7. US and international patents may apply.

8. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks

of Murata Manufacturing Co., Ltd.

Caution: Electrostatic Sensitive Device. Observe precautions for handling.

NOTES:

Electrical Connections

Connection Terminals

Port 1Hot 2

Port 1 Gnd Return 3

Port 2 Hot 8

Port 2 Gnd Return 9

Case Ground All Others

Pb

PX1002 (R) 2/12/15 Page 2 of 5 www.murata.com

PX1002 (R) 2/12/15 Page 3 of 5 www.murata.com

PX1002 (R) 2/12/15 Page 4 of 5 www.murata.com

USER DIRECTION OF FEED

COMPONENT ORIENTATION and DIMENSIONS

Carrier Tape Dimensions

Ao 7.0 mm

Bo 13.8 mm

Ko 2.0 mm

Pitch 12.0 mm

W24.0 mm

PIN #1

2 0 . 2

1 3 . 0

2 . 0

1 0 0 R E F .

" B " R E F .

H u b D e t a i l

1 2 . 0

D i m e n s i o n s i n m m

“B” Quantity Per Reel

Inches millimeters

7 178 500

13 330 3000

Tape and Reel Specifications

24.4

PX1002 (R) 2/12/15 Page 5 of 5 www.murata.com

SM13365-12 Case

Case Dimensions

Dimension mm Inches

Min Nom Max Min Nom Max

A13.08 13.31 13.60 0.515 0.524 0.535

B6.27 6.50 6.80 0.247 0.256 0.268

C1.91 2.00 0.075 0.079

D1.50 0.059

E0.79 0.031

H1.0 0.039

P2.54 0.100

Materials

Solder Pad

Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel

Lid Plating 2.0 to 3.0 µm Nickel

Body Al2O3 Ceramic

Pb Free

12-Terminal Ceramic Surface-Mount Case

13.3 x 6.5 mm Nominal Footprint

0.034 TYP.

0.100 TYP.

(0.86)

(2.54)

0.077 TYP.

(1.96)

0.555

(14.10)

0.287

(7.29)

0.334 REF.

(8.48)

C

H

P (8 Places)

E (10 Places)

D

B

A

4

5

6

7

1

12

11

10

3

98

2

TOP VIEW BOTTOM VIEW

23

89

1

12

11

10

4

5

6

7