Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
©2002 Bel Fuse Inc. Specifications subject to change without notice. 05.02
TM00130
T1-67
HIGH FREQUENCY MAGNETICS
T1/CEPT Dual Line Interface Transformers
SCHEMATICS
• Designed to meet the stringent demands of high density
designs
• Low height profile
S553-0013-00 S553-0013-02
ELECTRICAL SPECIFICATIONS at 25° C
S553-0013-01
16
15
14
1
Primary
S
econdary
2
3
11
9
6
8
Primary Seconda
ry
16
14
1Primary
S
econdary
2
3
11
9
6
8
Primary Seconda
ry
• Minimum interwinding breakdown voltage of 1500 Vr ms
• Reference data sheet TM9906 for additional dual surface
mount transformers
16
15
14
1
Primary Secondary
2
12
11
9
7
8
10
Primary Seconda
ry
C
oil A
C
oil B
rebmuNtraP
oitaRsnruT %5±
yramirP ecnatcudnI nimHm
egakaeL ecnatcudnI xamHµ
gnidniwretnI ecnaticapaC xamFp
yramirPRCD ΩΩ
Ω
ΩΩxam
AlioC BlioC B&AlioC lioC/AlioC BB&AlioC AlioC BlioC
00-3100-355STC583.1:11:1:102.105.0/08.05308.008.0
10-3100-355STC2:TC11:102.105.0/08.05308.008.0
20-3100-355STC2:163.1:102.108.0/08.05308.008.0
30-3100-355STC2:1TC2:102.108.0/08.05308.008.0
60-3100-355STC51.1:1TC2:102.108.0/05.05308.008.0
70-3100-355S62.1:1/1:1TC2:102.108.0/08.05308.008.0
22-3100-355S62.1:1/1:1TC2:TC102.106.0/06.00307.007.0
CORPORATE
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
FAR EAST
Bel Fuse Ltd.
8F / 8 Luk Hop Street
San Po Kong
K owloon, Hong K ong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
EUROPE
Bel Fuse Eur ope Ltd.
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
HIGH FREQUENCY MAGNETICS
©2002 Bel Fuse Inc. Specifications subject to change without notice. 05.02
TM00130
T1-68
T1/CEPT Dual Line Interface Transformers
MECHANICAL
S553-0013-00
S553-0013-01
S553-0013-02
S553-0013-03
S553-0013-06
S553-0013-07
S553-0013-22
SCHEMATICS
S553-0013-03
S553-0013-06 S553-0013-22
0.500
[12.70]
max
0
.375
[
9.53]
max
0.285
[7.24]
max
0.018 ±0.002
[0.46 ±0.05]
0.225
[5.72]
max
0.050
[1.27]
0.015
[0.38] 0.350 ±0.010
[8.89 ±0.25] 0.008 - 0.012
[0.20 - 0.30] 0.035
[0.89] 4˚ no
m
0.025
[0.64] 0.070
[1.78]
0.050
[1.27]
0.425
[10.80]
Suggested PCB Pad Layout
Dimensions are in inches [millimeters].
Standard dimension tolerance is ±0.010 [0.25] unless otherwise noted.
S553-0013-07*
*S553-0013 -07 1 : 1 (14 - 16) : (1 - 2)
*S553-0013 -07 1 : 1.26 (14 - 16) : (2 - 3)
16
10
14
1
Primary
Secondary
2
3
11
9
6
8
Primary Secondary
Coil A
Coil B
1 : 1 (14 - 16) : (2 - 3)
1 : 1.26 (14 - 16) : (1 - 3)
16
10
14
1
Primary
Secondary
3
11
9
6
8
Primary Secondar
y
2
7
