Product specification
2
8
ww.yageo.com
Feb 22, 2005 V.1
Chip Resistor Surface Mount SERIES
YC 248 (Pb Free)
CTC CODE
YC248 – X X X XX XXXX L
(1) (2) (3) (4) (5) (6)
(1) TOLERANCE
F = ±1%
J = ±5%
(2) PACKAGING TYPE
R = Paper/PE taping reel
(3) TEMPERATURE COEFFICIENT
OF RESISTANCE
– = Base on spec
(4) TAPING REEL
07 = 7 inch dia. Reel
(5) RESISTANCE VALUE
56R, 560R, 5K6, 56K, 1M
0R = Jumper
(6) RESISTOR TERMINATIONS
L = Lead free terminations (pure Tin)
ORDERING EXAMPLE
The ordering code of a YC248
convex chip resistor array, value
1,000 X with ±5% tolerance,
supplied in 7-inch tape reel is:
YC248-JR-071KL.
(1) The resistors have a 12-digit
ordering code starting with
2350.
(2) The subsequent 4 or 5 digits
indicate the resistor
tolerance and packaging.
(3) The remaining 4 or 3 digits
represent the resistance value
with the last digit indicating
the multiplier as shown in the
table of “Last digit of 12NC”.
(4) “L” means lead-free
terminations.
ORDERING EXAMPLE
The ordering code of an ARV381
convex chip resistor array, value
1,000 X with ±5% tolerance,
supplied in tape of 5,000 units
per reel is: 235005310102L.
P
PH
HY
YC
CO
OM
MP
P
O
OR
RD
DE
ER
RI
IN
NG
G
C
CO
OD
DE
E
12NC CODE
2350 XXX XXXXX L
(1) (2) (3) (4)
PAPER / PE TAPE ON REEL (units) (2)
TYPE/
0616
START
IN (1)
TOL.
(%)
RESISTANCE
RANGE
5,000
ARV381
2350 ±5% 10 to 1 MΩ 053 10xxx
ARV382
2350 ±1% 10 to 1 MΩ 043 1xxxx
Jumper
2350 - 0 Ω 053 91001
SCOPE
This specification describes YC248 series chip resistor arrays with lead-free terminations made by thick film
process.
ORDERING INFORMATION
Part number is identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and
resistance value.
NOTE
1. The “L” at the end of the code is only for ordering. On the reel label, the standard CTC or 12NC will be mentioned an additional stamp
“LFP”= lead free production.
2. Products with lead in terminations fulfil the same requirements as mentioned in this datasheet.
3. Products with lead in terminations will be phased out in the coming months (before July 1st, 2006)
Resistance decade (3) Last digit
0.01 to 0.0976 X0
0.1 to 0.976 X 7
1 to 9.76 X 8
10 to 97.6 X 9
100 to 976 X 1
1 to 9.76 kX 2
10 to 97.6 kX 3
100 to 976 kX 4
1 to 9.76 MX 5
10 to 97.6 MX 6
Example: 0.02
X= 0200 or 200
0.3 X = 3007 or 307
1
X = 1008 or 108
33 kX= 3303 or 333
10 MX= 1006 or 106
Last digit of 12NC