APEM KR series Sealed power rocker switches * Illuminated or non-illuminated * Attractive styling * Laser marking KR series Power rocker switches Distinctive features and specifications New rocker design Illuminated or non-illuminated Sealed to IP 65, IP 67 pending Laser marking ELECTRICAL SPECIFICATIONS MATERIALS * Currrent/voltage rating : - functions 1 (ON-OFF) and 6 (ON-ON) : 15A 12VDC, 10A 24VDC max. 10mA 14VDC min. - functions 4 ( ON ON ON) and 4-1R (ON ON MOM) : 8A 12VDC, 5A 24VDC max. - other functions : 10A 12VDC, 8A 24VDC max. * Initial contact resistance : 10 m max. at 1A 2VDC * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals * Electrical life : 10.000 cycles min. * Mechanical life : - 2 position models : 100.000 cycles min. - 3 position models : 30.000 cycles min. * Case and bezel : thermoplastic UL94-V0 * Terminals : brass, silver plated * Contacts : silver grain * Contact roller : brass, nickel plated SEALING Sealing is optional. To order a sealed product, do not forget to complete appropriate box of ordering format on the following pages. ENVIRONMENTAL SPECIFICATIONS * Degree of protection : IP 65 (sealed version) * Salt spray resistance : 96 hours according to IEC 512-6, test 11f * Operating temperature : - 2 position models : -40C to + 85C - 3 position models : -10C to + 65C DIMENSIONS Flat seal 46.50 (1.830) 12.00 (.472) 48.70 (1.917) 23.50 (.925) 24.00 (.944) 6.85 (.269) 14.65 (.576) 11.00 (.433) U2260 25.00 (.984) Dimensions : First dimensions are in mm while inches are shown as bracketed numbers. 47.00 (1.850) Packaging unit : 40 pieces Dimensions, specifications and data shown in this brochure are subject to change without notice. 2 www.apem.com APEM KR series Power rocker switches Case HOW TO ORDER * To order a complete product, fill in all the boxes of the following order guide. * To order case only (without rocker), finish your order number with the LED wiring code. * To order rocker only (without case), begin the order number with code KRR, then follow the order format from "rocker type" until the end of the options. CASE + LED ROCKER MARKING MODEL STRUCTURE 2-3 5-6 Single pole KR31 KR35 KR36 KR37 KR38 KR39 Double pole KR41 KR44* KR44-1R* KR45 KR46 KR47 KR48 KR49 3 2 1 6 5 4 3 2 1 1-2 4-5 ON ON ON MOM ON MOM ON ON OFF ON ON ON MOM ON ON OFF MOM OFF MOM OFF ON * Function 4 : single pole in double pole case CKRSH1-A TERMINALS Side A O3.00x0.50 SI (.118DIAx0.50 IS) 0.80 (.031) 4.50 (.177) 6.35 (.25) 2 4 0 Screw o1.50 (.059DIA) O3.10 (.122DIA) Solder lug / quick-connect 4 2 5 Side A : terminals 1 and 4 Side B : terminals 3 and 6 3 6 6.35x0.80 (.250x.031) 6.35x0.80 (.25x.031) with barrier without barrier 1 Terminals 1 to 6 are marked on the case. 3 5 with barrier without barrier Quick-connect Side B CKRSH2-A CONTACT MATERIALS A APEM Silver grain Functions ON-OFF and ON-ON : 15A 12VDC , 10A 24VDC max. - 10mA 14 VDC min. Other functions : 10A 12VDC, 8A 24VDC max. www.apem.com 3 KR series Power rocker switches Illumination SEALING Blank No sealing K Sealed version LEDS Side A Side B Complete each enlarged box with one of the codes listed below. X Without lamp J 24V LED red A 6V LED red K 24V LED green B 6V LED green L 24V LED yellow C 6V LED yellow D 12V LED red E 12V LED green F 12V LED yellow Side A 4 1 4 1 4 1 4 1 5 2 5 2 5 2 5 2 6 3 6 3 6 3 6 3 Side B The LED wiring diagram is shown on the case. LED WIRING 1 4 1 4 1 4 1 1 4 2 5 2 5 2 5 2 5 2 3 6 3 6 3 6 3 6 3 A (standard) 4 5 6 B 1 2 3 4 1 4 1 5 2 5 2 6 3 6 3 4 5 6 C 1 2 3 4 5 6 D - for function 1 (on-off) CKGRLD with LED on side A 4 www.apem.com APEM KR series Power rocker switches Rockers - Marking To order rocker only (without case), begin the order number with code KRR, then follow the order format from "rocker type" until the end of the options. ROCKER TYPE 1 2 For non-illuminated application For illuminated application Other rocker types : on request. ROCKER COLOUR Blue 5 Yellow Dark blue 6 Red 2 Black 7 Ivory 3 Green 9 Orange 4 Grey 1 1/4 If no marking required, leave box blank. MARKING ORIENTATION 4 ON 5 1 1 2 ON 3 4 2 3 3 N 6 5 4 OFF OFF 2 OFF 6 6 6 5 O 1 5 ON S 4 OFF 3 ON 2 CKRMA1-A 1 E Other orientations : on request APEM www.apem.com 5 KR series Power rocker switches Marking SYMBOLS A B M White marking for black rockers - Black marking for colour rockers - Other : on request. Marking in M area : on request. Shaded area = standard marking CODE SYMBOL XX None - 10 Down motion 01 ON - 11 Hot 02 OFF - 12 Cold 20 03 - 13 Hazard lights 21 04 - 14 Traveller lighting 22 Windshield washer 05 - 15 Driver lighting 23 Ventilator CODE SYMBOL DESCRIPTION 4 1 M 5 2 B 6 3 A 2 Windshield demister/defroster 1 CKRMA2-A 2 1 Windshield wiper 06 STOP - 16 Revolving light 24 Side mirror defroster 07 A Stop 17 Rear ventilator 25 Restarting pump 08 M Motion 18 Heating 26 Front fog lights Up motion 19 Door opening 27 Rear fog lights 09 6 DESCRIPTION www.apem.com APEM KR series Power rocker switches Mounting - Accessories SWITCH PANEL CUT-OUT MATRIX MOUNTING 25.00 mini (.984 min.) Panel thickness : 0,8 mm to 4,6 mm 47.00 mini (1.850 min.) 4.00 (.157) 10.20 (.402) Recommended thickness : between 2 mm and 3,5 mm 36.80 (1.449) 21.08 (.830) CONNECTOR For use with terminals type 2, 3, 4 or 5. 6,35 (1/4) tabs to be fitted by the user (example : AMP/Tyco 0-0141013-2). U2260 MOUNTING PANEL END MOUNTING PANEL MIDDLE MOUNTING PANEL CUT-OUT 48.20 0/0.20 (1.898 0/0.08) 56.00 (2.205) 56.00 (2.205) 51.30 0/0.20 (2.020 0/0.08) 3.80 (.150) 26.50 (1.043) 29.26 (1.152) U2261 3.80 (.150) 26.50 (1.043) 26.26 (1.034) U2262 CKRDE3-A APEM CKRDE2-A www.apem.com CKRDE4-A 7 APEM, a world of switching capabilities The APEM group is one of the world's largest switch and switch panel manufacturers. APEM designs, develops, manufactures and sells electromechanical components to multiple industrial markets including: instrumentation, medical, security, communications, industrial automation, interactive kiosk, avionics, military and transport. Other APEM sealed products Piezo switches Piezo switches have no moving parts, are dust and water proof and their metal surface is impervious to other types of contamination. " I " range of pushbuttons This range consists of several series of sealed pushbuttons (IP, IB, IS, IF, IA) and a large variety of models: round or square, momentary or latching, illuminated or non-illuminated, plastic or metallic. Sealing boots Sealing boots for toggle, pushbutton or rocker prevent dust, sand or water from getting into switches. They are available in a wide range of colours. www.apem.com KR0607A-INC. Addresses of sales subsidiaries and distributors network on