APEM
KR series
Sealed power rocker switches
•Illuminated or non-illuminated
• Attractive styling
• Laser marking
APEMwww.apem.com2
KR series
Power rocker switches
Distinctive features and specifications
SEALING
Sealing is optional.
To order a sealed product, do not
forget to complete appropriate
box of ordering format on the
following pages.
Packaging unit :40 pieces
❑
❑ New rocker design
❑
❑ Illuminated or non-illuminated
❑
❑ Sealed to IP 65, IP 67 pending
❑
❑ Laser marking
ELECTRICAL SPECIFICATIONS
• Currrent/voltage rating :
- functions 1 (ON-OFF) and 6 (ON-ON) : 15A 12VDC, 10A 24VDC max.
10mA 14VDC min.
- functions 4 ( ON ON ON) and 4-1R (ON ON MOM) :
8A 12VDC, 5A 24VDC max.
- other functions : 10A 12VDC, 8A 24VDC max.
• Initial contact resistance : 10 mΩmax. at 1A 2VDC
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals
• Electrical life : 10.000 cycles min.
• Mechanical life :
- 2 position models : 100.000 cycles min.
- 3 position models : 30.000 cycles min.
MATERIALS
• Case and bezel :
thermoplastic UL94-V0
• Terminals : brass, silver plated
• Contacts : silver grain
•
Contact roller : brass, nickel plated
ENVIRONMENTAL SPECIFICATIONS
• Degree of protection : IP 65 (sealed version)
• Salt spray resistance : 96 hours according to IEC 512-6, test 11f
• Operating temperature :
- 2 position models : -40°C to + 85°C
- 3 position models : -10°C to + 65°C
DIMENSIONS
Dimensions : First dimensions are in mm while
inches are shown as bracketed numbers.
(.944)
11.00
(.433)
(1.850)
47.00
23.50
(.925)
(.269)
6.85
(.576)
14.65
(.472)
12.00
(.984)
25.00
46.50
(1.830)
(1.917)
48.70
24.00
U2260
CKR46DT1-A
indice A
ECHELLE: 0.625
le 17/07/06
FICHIER: CKR46DT
➞Flat seal
Dimensions, specifications and data shown in this brochure are subject to change without notice.
KR series
Power rocker switches
Case
APEM www.apem.com 3
2with barrier
4without barrier
1
2
3
4
5
6
CKRSH2-A
indice A
ECHELLE: 0.625
le 17/07/06
FICHIER: CKR46SH
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
MODEL
STRUCTURE
2-3 1-2
5-6 4-5
Single pole Double pole
KR31 KR41 ON - OFF
KR44* ON ON ON
KR44-1R* ON ON MOM
KR35 KR45 MOM - ON
KR36 KR46 ON - ON
KR37 KR47 MOM OFF MOM
KR38 KR48 ON OFF MOM
KR39 KR49 ON OFF ON
123
321
456
CKRSH1-A
indice A
ECHELLE: 0.625
le 17/07/06
FICHIER: CKR46SH
* Function 4 : single pole in double pole case
TERMINALS
03with barrier
5without barrier
Screw
Solder lug / quick-connect
Quick-connect
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
ø1.50
(.059DIA)
6.35x0.80
(.250x.031)
CONTACT MATERIALS
ASilver grain
Functions ON-OFF and ON-ON : 15A 12VDC , 10A 24VDC max. - 10mA 14 VDC min.
Other functions : 10A 12VDC, 8A 24VDC max.
CASE + LED ROCKER MARKING
Terminals 1 to 6
are marked on the case.
Side A : terminals 1 and 4
Side B : terminals 3 and 6
Side A
Side B
HOW TO ORDER
• To order a complete product, fill in all the boxes of the following order guide.
• To order case only (without rocker), finish your order number with the LED wiring code.
• To order rocker only (without case), begin the order number with code KRR, then follow the order format from
”rocker type” until the end of the options.
APEMwww.apem.com4
KR series
Power rocker switches
Illumination
1
2
3
4
5
66
5
4
3
2
11
2
3
4
5
66
5
4
3
2
1
CKRIL-A
indice A
ECHELLE: 0.625
le 17/07/06
FICHIER: CKRIL
C
4
1
36
25
14
36
25
B
A (standard)
4
1
36
25
4
1
36
25
D - for function 1 (on-off)
with LED on side A
4
114
14
363
252
636
525
4
1
36
25
LEDS
XWithout lamp
A6V LED red
B
C
D
E
F
J
K
L
6V LED green
6V LED yellow
12V LED red
12V LED green
12V LED yellow
24V LED red
24V LED green
24V LED yellow
Side A
Side A
Side B
Side B
Complete each enlarged box with one of the codes listed below.
LED WIRING The LED wiring diagram is shown on the case.
2 5
3 6
1 4
CKGRLD
SEALING
Blank No sealing
KSealed version
KR series
Power rocker switches
Rockers - Marking
APEM www.apem.com 5
ROCKER TYPE
ROCKER COLOUR
1Blue
1/4 Dark blue
2
3
4
Black
Green
Grey
5
6
7
9
Yellow
Red
Ivory
Orange
1For non-illuminated application
2For illuminated application
Other rocker types : on request.
To order rocker only (without case), begin the order number with code KRR, then follow the order format
from ”rocker type” until the end of the options.
MARKING ORIENTATION If no marking required, leave box blank.
Other orientations : on request
OFF
ON
ON
OFF
OFF
ON
ON
OFF
4
5
6
1
2
3
123
456
3
2
14
5
6654
1
2
3
CKRMA1-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
NOSE
APEMwww.apem.com6
KR series
Power rocker switches
Marking
CODE SYMBOL DESCRIPTION
XX None -
-
-
-
-
Stop
Motion
Up motion
CODE SYMBOL DESCRIPTION
10 Down motion
Hot
Windshield
demister/defroster
Windshield
wiper
Windshield
washer
Ventilator
Side mirror
defroster
Restarting
pump
Front
fog lights
Rear
fog lights
Cold
Hazard lights
Traveller
lighting
Driver
lighting
Revolving
light
Rear ventilator
Heating
Door opening
11
12 20
13
14
15
16
17
18
19
21
22
23
24
25
26
27
03
04
05
06
07
08
09
White marking for black rockers - Black marking for colour rockers - Other : on request.
Marking in M area : on request.
Shaded area = standard marking
SYMBOLS
3
2
1
6
5
4
CKRMA2-A
FICHIER: CKRMA
le 17/07/06
ECHELLE: 0.625
indice A
A
A
M
B
MB
ON
OFF
STOP
A
M
1
2
1
2
-
-
02
01
KR series
Power rocker switches
Mounting - Accessories
APEM www.apem.com 7
MATRIX MOUNTING
(.984 min.)
25.00 mini
(.157)
4.00 47.00 mini
(1.850 min.)
10.20
(.402)
FICHIER: CKRDE
le 17/07/06
ECHELLE: 0.625
indice A
CKRDE1-A
SWITCH PANEL CUT-OUT
Panel thickness :
0,8 mm to 4,6 mm
Recommended thickness :
between 2 mm and 3,5 mm
MOUNTING PANEL CUT-OUT
36.80
(1.449)
21.08
(.830)
CONNECTOR
For use with terminals type 2, 3,
4 or 5.
6,35 (1/4) tabs to be fitted by the user
(example : AMP/Tyco 0-0141013-2).
U2260
MOUNTING PANEL END
(1.152)
29.26
56.00
(2.205)
(1.043)
26.503.80
(.150)
FICHIER: CKRDE
le 17/07/06
ECHELLE: 0.625
indice A
CKRDE3-A
U2261
MOUNTING PANEL MIDDLE
(2.205)
56.00
26.26
(1.034)
(.150)
3.80 26.50
(1.043)
FICHIER: CKRDE
le 17/07/06
ECHELLE: 0.625
indice A
CKRDE2-A
U2262
(1.898 0/0.08)
48.20 0/0.20
51.30 0/0.20
(2.020 0/0.08)
FICHIER: CKRDE
le 17/07/06
ECHELLE: 0.625
indice A
CKRDE4-A
Addresses of sales subsidiaries and distributors network on
www.apem.com
Other APEM sealed products
The APEM group is one of the world’s largest switch and
switch panel manufacturers.
APEM designs, develops, manufactures and sells electro-
mechanical components to multiple industrial markets
including: instrumentation, medical, security, communications,
industrial automation, interactive kiosk, avionics, military and
transport.
Piezo switches have no moving parts, are dust and
water proof and their metal surface is impervious to
other types of contamination.
This range consists of several series of sealed
pushbuttons (IP, IB, IS, IF, IA) and a large variety of
models: round or square, momentary or latching,
illuminated or non-illuminated, plastic or metallic.
Sealing boots for toggle, pushbutton or rocker
prevent dust, sand or water from getting into
switches. They are available in a wide range of colours.
APEM,
a world of switching capabilities
Piezo switches
" I " range of pushbuttons
Sealing boots
KR0607A-INC.
