INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: * The IC04 LOCMOS HE4000B Logic Family Specifications HEF, HEC * The IC04 LOCMOS HE4000B Logic Package Outlines/Information HEF, HEC HEF4053B MSI Triple 2-channel analogue multiplexer/demultiplexer Product specification File under Integrated Circuits, IC04 January 1995 Philips Semiconductors Product specification Triple 2-channel analogue multiplexer/demultiplexer HEF4053B MSI With E LOW, one of the two switches is selected (low impedance ON-state) by Sn. With E HIGH, all switches are in the high impedance OFF-state, independent of SA to SC. DESCRIPTION The HEF4053B is a triple 2-channel analogue multiplexer/demultiplexer with a common enable input (E). Each multiplexer/demultiplexer has two independent inputs/outputs (Y0 and Y1), a common input/output (Z), and select inputs (Sn). Each also contains two-bidirectional analogue switches, each with one side connected to an independent input/output (Y0 and Y1) and the other side connected to a common input/output (Z). VDD and VSS are the supply voltage connections for the digital control inputs (SA to SC and E). The VDD to VSS range is 3 to 15 V. The analogue inputs/outputs (Y0, Y1 and Z) can swing between VDD as a positive limit and VEE as a negative limit. VDD-VEE may not exceed 15 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to VSS (typically ground). Fig.1 Functional diagram. FAMILY DATA, IDD LIMITS category MSI See Family Specifications January 1995 2 Philips Semiconductors Product specification Triple 2-channel analogue multiplexer/demultiplexer HEF4053B MSI PINNING Y0A to Y0C independent inputs/outputs Y1A to Y1C independent inputs/outputs SA to SC select inputs E enable input (active LOW) ZA to ZC common inputs/outputs FUNCTION TABLE Fig.2 Pinning diagram. INPUTS HEF4053BP(N): 16-lead DIL; plastic (SOT38-1) HEF4053BD(F): 16-lead DIL; ceramic (cerdip) CHANNEL ON E Sn L L Y0n-Zn L H Y1n-Zn H X none Notes (SOT74) 1. H = HIGH state (the more positive voltage) L = LOW state (the less positive voltage) X = state is immaterial HEF4053BT(D): 16-lead SO; plastic (SOT109-1) ( ): Package Designator North America Fig.3 Schematic diagram (one switch). RATINGS Limiting values in accordance with the Absolute Maximum System (IEC 134) Supply voltage (with reference to VDD) VEE -18 to + 0,5 V Note 1. To avoid drawing VDD current out of terminal Z, when switch current flows into terminals Y, the voltage drop across the bidirectional switch must not exceed 0,4 V. If the switch current flows into terminal Z, no VDD current will flow out of terminals Y, in this case there is no limit for the voltage drop across the switch, but the voltages at Y and Z may not exceed VDD or VEE. January 1995 3 Philips Semiconductors Product specification Triple 2-channel analogue multiplexer/demultiplexer HEF4053B MSI Fig.4 Logic diagram. January 1995 4 Philips Semiconductors Product specification Triple 2-channel analogue multiplexer/demultiplexer HEF4053B MSI DC CHARACTERISTICS Tamb = 25 C VDD-VEE V SYMBOL TYP. MAX. 350 2500 80 245 15 60 175 5 115 340 50 160 15 40 115 5 120 365 65 200 15 50 155 `' ON resistance 5 25 - between any two 10 10 - channels 15 5 - - nA 5 ON resistance ON resistance ON resistance OFF-state leakage 10 10 10 RON RON RON RON - 5 CONDITIONS current, all 10 - - nA channels OFF 15 - 1000 nA 5 - - nA - - nA - 200 nA OFF-state leakage current, any 10 channel 15 IOZZ IOZY Vis = 0 to VDD-VEE see Fig.6 Vis = 0 see Fig.6 Vis = VDD-VEE see Fig.6 Vis = 0 to VDD-VEE see Fig.6 E at VDD E at VSS Fig.5 Operating area as a function of the supply voltages. January 1995 5 Philips Semiconductors Product specification Triple 2-channel analogue multiplexer/demultiplexer HEF4053B MSI Fig.6 Test set-up for measuring RON. Iis = 200 A VSS = VEE = 0 V Fig.7 Typical RON as a function of input voltage. January 1995 6 Philips Semiconductors Product specification Triple 2-channel analogue multiplexer/demultiplexer HEF4053B MSI AC CHARACTERISTICS VEE = VSS = 0 V; Tamb = 25 C; input transition times 20 ns VDD V Dynamic power TYPICAL FORMULA FOR P (W) 2 500 fi + (foCL) x VDD2 5 dissipation per 10 11 500 fi + (foCL) x package (P) 15 29 000 fi + (foCL) x where VDD2 VDD2 fi = input freq. (MHz) fo = output freq. (MHz) CL = load capacitance (pF) (foCL) = sum of outputs VDD = supply voltage (V) AC CHARACTERISTICS VEE = VSS = 0 V; Tamb = 25 C; input transition times 20 ns VDD V SYMBOL TYP. MAX. 10 20 ns Propagation delays Vis Vos HIGH to LOW LOW to HIGH Sn Vos HIGH to LOW LOW to HIGH 5 10 tPHL 5 10 ns 15 5 10 ns 5 15 30 ns 10 tPLH 5 10 ns 15 5 10 ns 5 200 400 ns 10 tPHL 85 170 ns 15 65 130 ns 5 275 555 ns 100 200 ns 15 65 130 ns 5 200 400 ns 10 tPLH note 1 note 1 note 2 note 2 Output disable times E Vos HIGH LOW 115 230 ns 15 110 220 ns 5 200 400 ns 120 245 ns 110 215 ns 10 10 tPHZ tPLZ 15 note 3 note 3 Output enable times E Vos 5 HIGH 10 tPZH 15 5 LOW 10 15 January 1995 tPZL 260 525 ns 95 190 ns 65 130 ns 280 565 ns 105 205 ns 70 140 ns 7 note 3 note 3 Philips Semiconductors Product specification Triple 2-channel analogue multiplexer/demultiplexer VDD V Distortion, sine-wave response Crosstalk between any two channels 5 SYMBOL HEF4053B MSI TYP. MAX. 0,25 % 10 0,04 % 15 0,04 % 5 - MHz 10 1 MHz 15 - MHz 5 - mV or address input 10 50 mV to output 15 - mV 5 - MHz 10 1 MHz 15 - MHz 5 13 MHz 10 40 MHz 15 70 MHz Crosstalk; enable OFF-state feed-through ON-state frequency response note 4 note 5 note 6 note 7 note 8 Notes Vis is the input voltage at a Y or Z terminal, whichever is assigned as input. Vos is the output voltage at a Y or Z terminal, whichever is assigned as output. 1. RL = 10 k to VEE; CL = 50 pF to VEE; E = VSS; Vis = VDD (square-wave); see Fig.8. 2. RL = 10 k; CL = 50 pF to VEE; E = VSS; Sn = VDD (square-wave); Vis = VDD and RL to VEE for tPLH; Vis = VEE and RL to VDD for tPHL; see Fig.8. 3. RL = 10 k; CL = 50 pF to VEE; E = VDD (square-wave); Vis = VDD and RL to VEE for tPHZ and tPZH; Vis = VEE and RL to VDD for tPLZ and tPZL; see Fig.8. 4. RL = 10 k; CL = 15 pF; channel ON; Vis = 12 VDD (p-p) (sine-wave, symmetrical about 12 VDD); fis = 1 kHz; see Fig.9. 5. RL = 1 k; Vis = 12 VDD (p-p) (sine-wave, symmetrical about 12 VDD); V os 20 log --------- = - 50 dB; see Fig. 10. V is 6. RL = 10 k to VEE; CL = 15 pF to VEE; E or Sn = VDD (square-wave); crosstalk is Vos (peak value); see Fig.8. 7. RL = 1 k; CL = 5 pF; channel OFF; Vis = 12 VDD (p-p) (sine-wave, symmetrical about 12 VDD); V os 20 log --------- = - 50 dB; see Fig. 9. V is 8. RL = 1 k; CL = 5 pF; channel ON; Vis = 12 VDD (p-p) (sine-wave, symmetrical about 12 VDD); V os 20 log --------- = - 3 dB; see Fig. 9. V is January 1995 8 Philips Semiconductors Product specification Triple 2-channel analogue multiplexer/demultiplexer HEF4053B MSI Fig.8 Fig.9 (b) (a) Fig.10 APPLICATION INFORMATION Some examples of applications for the HEF4053B are: * Analogue multiplexing and demultiplexing. * Digital multiplexing and demultiplexing. * Signal gating. NOTE If break before make is needed, then it is necessary to use the enable input. January 1995 9