672D187H050DS5C - Vishay / Sprague

672D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 1Document Number: 42054

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Aluminum Capacitors

+105 °C, Miniature, Radial Lead

FEATURES

• Original SMPS output capacitors

• Minimal ESR change

• High ripple current capability

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

QUICK REFERENCE DATA

DESCRIPTION VALUE

Nominal case size 

Ø D x L in inches [mm]

0.394 x 0.472 [10.0 x 12.0]

to 0.709 x 1.575 [18.0 x 40.0]

Operating temperature -55 °C to +105 °C

Rated capacitance range, CR4.7 μF to 3300 μF

Tolerance on CR-10 %, +50 %

Rated voltage range, UR6.3 WVDC to 250 WVDC

Termination 2 and 3 radial leads and axial

mount.

Life validation test

4000 h at +105 °C (



13.0 mm dia.):

3000 h at +105 °C (10.0 mm dia.):



CAP



20 % from initial

measurement.



ESR



1.15 x initial specified limit.



DCL



initial specified limit.

Shelf life at 105 °C

500 h:



CAP



10 % from initial

measurement.



ESR



1.15 x initial specified limit.



DCL



2 x initial specified limit,

(6.3 WV

to 100 WV

);



3 x initial specified limit,

(150 WV

to 250 WV

DC leakage current

(after 2 min charge)

I = 0.03

(6.3 V

to 100 V

)

I = 0.01 CV

(150 V

to 250 V

)

I in μA, C in μF, V in Volts

RIPPLE CURRENT MULTIPLIERS

TEMPERATURE

AMBIENT

TEMPERATURE MULTIPLIERS

+105 °C 0.5

+85 °C 1.0

 +75 °C 1.25

FREQUENCY (Hz)

WVDC 50 TO 60 100 TO 120 300 TO 400 1K TO 19K

0 to 75 0.60 0.70 0.75 0.80

76 to 100 0.40 0.55 0.70 0.80

101 to 250 0.25 0.35 0.45 0.65

LOW TEMPERATURE PERFORMANCE

CAPACITANCE RATIO C-55 °C / C+25 °C MINIMUM AT 120 Hz

MAXIMUM 

CAPACITANCE 

CHANGE

VOLTAGE MULTIPLIER

6.3 V to 100 V 0.75

150 V to 250 V 0.70

MAXIMUM 

IMPEDANCE

CHANGE

VOLTAGE MULTIPLIER

6.3 V to 100 V 2.5

150 V to 250 V 2.0

ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz)

NOMINAL

DIAMETER

0.394

[10.0]

0.512

[13.0]

0.630

[16.0]

0.709

[18.0]

TYPICAL ESL (nH) 4.0 7.0 10.0 12.0

Available

672D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 2Document Number: 42054

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

BULK SPECIFICATIONS in millimeters

Notes

Positive terminal

Negative terminal

No charge potential

(1) Available for 12.5 mm, 16 mm, and 18 mm diameter units

(2) Available for 12.5 mm, 16 mm, and 18 mm diameter units with epoxy end-seal

TERMINAL CODE C

7.1 min.

Sleeve

9.5 min.

TERMINAL CODE J (1)

L25 min.25 min.

25 min.

-NC

Sleeve

TERMINAL CODE D

15 min.

20 min. L

Sleeve

TERMINAL CODE O (2)

7.1 ± 1.6

5.0 ± 1.6

9.5 ± 1.6

Third lead may fall

within ± 20° of C

Sleeve

DIMENSIONS in inches [millimeters]

CASE

CODE

NOMINAL STYLES 2 AND 4 STYLES 3 AND 5 LEAD SPACING LEAD DIAMETER

D L D (max.) L (max.) D (max.) L (max.) S ± 0.024

[0.60]

T ± 0.020

[0.50] NOMINAL AWG

CC 0.394 [10.0] 0.512 [13.0] 0.413 [10.5] 0.563 [14.3] 0.413 [10.5] 0.630 [16.0] 0.197 [5.0] n/a 0.025 [0.63] 22

CD 0.394 [10.0] 0.630 [16.0] 0.413 [10.5] 0.669 [17.0] 0.413 [10.5] 0.740 [18.8] 0.197 [5.0] n/a 0.025 [0.63] 22

CG 0.394 [10.0] 0.787 [20.0] 0.413 [10.5] 0.846 [21.5] 0.413 [10.5] 0.906 [23.0] 0.197 [5.0] n/a 0.025 [0.63] 22

DG 0.492 [12.5] 0.787 [20.0] 0.512 [13.0] 0.846 [21.5] 0.512 [13.0] 0.906 [23.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

DK 0.492 [12.5] 0.984 [25.0] 0.512 [13.0] 1.043 [26.5] 0.512 [13.0] 1.142 [29.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

DM 0.492 [12.5] 1.043 [26.5] 0.512 [13.0] 1.102 [28.0] 0.512 [13.0] 1.161 [29.5] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

DT 0.492 [12.5] 1.319 [33.5] 0.512 [13.0] 1.346 [34.2] 0.512 [13.0] 1.417 [36.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

DS 0.492 [12.5] 1.673 [42.5] 0.512 [13.0] 1.720 [43.7] 0.512 [13.0] 1.791 [45.5] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20

EK 0.630 [16.0] 0.984 [25.0] 0.650 [16.5] 1.031 [26.2] 0.650 [16.5] 1.098 [27.9] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

EN 0.630 [16.0] 1.260 [32.0] 0.650 [16.5] 1.319 [33.5] 0.650 [16.5] 1.417 [36.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

ER 0.630 [16.0] 1.417 [36.0] 0.650 [16.5] 1.476 [37.5] 0.650 [16.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

ET 0.630 [16.0] 1.319 [33.5] 0.650 [16.5] 1.347 [34.2] 0.650 [16.5] 1.417 [36.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

EU 0.630 [16.0] 1.575 [40.0] 0.650 [16.5] 1.642 [41.7] 0.650 [16.5] 1.669 [42.4] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

FR 0.709 [18.0] 1.417 [36.0] 0.728 [18.5] 1.476 [37.5] 0.728 [18.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

FV 0.709 [18.0] 1.575 [40.0] 0.728 [18.5] 1.653 [42.0] 0.728 [18.5] 1.693 [43.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20

672D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 3Document Number: 42054

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TAPE AND REEL, SPECIFICATIONS TO EIA-468D in inches [millimeters]

Formed Leads

Unformed (Straight) Leads

Note

(1) Available as special order.

DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES

CASE SIZE F LEAD SPACING STD. QTY/REEL

0.236 x 0.453 [6.0 x 11.0] 0.197 [5.0] 800

0.315 x 0.472 [8.0 x 12.0] 0.197 [5.0] 700

DIMENSIONS in inches [millimeters] AND PACKAGING QUANTITIES

CASE SIZE F LEAD SPACING STD. QTY/REEL

0.236 x 0.453 [6.0 x 11.0] 0.098 [2.5] 800

0.315 x 0.472 [8.0 x 12.0] 0.140 [3.5] (1) 700

0.394 x 0.512 [10.0 x 13.0] 0.197 [5.0] 500

0.394 x 0.630 [10.0 x 16.0] 0.197 [5.0] 500

0.394 x 0.787 [10.0 x 20.0] 0.197 [5.0] 500

W0W

672D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 4Document Number: 42054

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Positive leader is standard. Negative leader is available by special order.

ORDERING EXAMPLE

Electrolytic capacitor 672D series: 672D 336 F 100 DM 5 D

Note

• For lead (Pb)-free / RoHS compliant products add suffix “E3” to part number.

Example: 672D336F100DM5DE3

DIMENSIONS in inches [millimeters]

ITEM

CASE SIZE (DIAMETER x LENGTH)

0.236 x 0.433

[6.0 x 11.0]

0.315 x 0.472

[8.0 x 12.0]

0.394 x 0.512

[10.0 x 13.0]

0.394 x 0.630

[10.0 x 16.0]

0.394 x 0.787

[10.0 x 20.0]

d - Lead-wire diameter 0.025 [0.63] 0.025 [0.63] 0.025 [0.63] 0.025 [0.63] 0.025 [0.63]

P - Pitch of component 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7]

P0 - Feed hole pitch 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7]

F - Lead-to-lead distance 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0]

K - Clinch height 0.098 [2.5] 0.157 [4.0] n/a n/a n/a

H - Height of component from tape center 0.728 [18.5] 0.787 [20.0] 0.906 [23.0] 0.906 [23.0] 0.906 [23.0]

H0 - Lead-wire clinch height 0.630 [16.0] 0.630 [16.0] n/a n/a n/a

W - Tape width 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0]

W0 - Hold down tape width 0.591 [15.0] 0.591 [15.0] 0.591 [15.0] 0.591 [15.0] 0.591 [15.0]

D0 - Feed hole diameter 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0]

f - Total tape thickness 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7]

L1 - Maximum lead protrusion 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] 0.118 [3.0]

DESCRIPTION

CODE EXPLANATION

672D Product type

336 Capacitance value (33 μF)

F Tolerance (F = -10 % / +50 %)

100 Voltage rating at 105 °C (100 = 100 V)

DM Can size (see Dimensions table)

5 Sleeve and sealing (5 = polyester sleeve w/epoxy end seal)

D Terminal code / packaging (D = bulk; straight leads)

ELECTRICAL DATA AND ORDERING INFORMATION

CAPACITANCE

(μF) PART NUMBER NOMINAL CASE SIZE

D x L

MAX. ESR

AT +25 °C ()

MAX. RIPPLE

AT +85 °C (A)

MAX.

IMPEDANCE

AT +25 °C ()

100 kHz

120 Hz 20 kHz 20 kHz TO 100 kHz

6.3 WVDC AT 105 °C, SURGE = 9 V

150.0 672D157F6RCD5D 0.394 x 0.630 [10.0 x 16.0] 1.10 0.70 0.50 0.60

220.0 672D227F6RCG5D 0.394 x 0.787 [10.0 x 20.0] 0.75 0.40 0.70 0.33

1000.0 672D108F6REK5D 0.630 x 0.984 [16.0 x 25.0] 0.16 0.09 2.05 0.085

1500.0 672D158F6RET5D 0.630 x 1.319 [16.0 x 33.5] 0.105 0.06 2.90 0.055

3300.0 672D338F6RFV5D 0.709 x 1.575 [18.0 x 40.0] 0.075 0.045 3.40 0.045

12 WVDC AT 105 °C, SURGE = 16 V

100.0 672D107F012CC5D 0.394 x 0.512 [10.0 x 13.0] 1.60 0.90 0.40 0.70

470.0 672D477F012DM5D 0.492 x 1.043 [12.5 x 26.5] 0.31 0.16 1.35 0.12

1000.0 672D108F012DS5D 0.492 x 1.673 [12.5 x 42.5] 0.15 0.08 2.35 0.06

2200.0 672D228F012FV5D 0.709 x 1.575[18.0 x 40.0] 0.08 0.05 3.30 0.05

15 WVDC AT 105 °C, SURGE = 20 V

100.0 672D107F015CD5D 0.394 x 0.630 [10.0 x 16.0] 1.35 0.70 0.50 0.50

470.0 672D477F015DT5D 0.492 x 1.319 [12.5 x 35.5] 0.25 0.12 1.75 0.11

1000.0 672D108F015ET5D 0.630 x 1.319 [16.0 x 33.5] 0.12 0.06 2.90 0.055

20 WVDC AT 105 °C, SURGE = 30 V

100.0 672D107F020CG5D 0.394 x 0.787 [10.0 x 20.0] 1.25 0.40 0.70 0.35

470.0 672D477F020EK5D 0.630 x 0.984 [16.0 x 25.0] 0.24 0.09 2.00 0.085

1000.0 672D158F020FV5D 0.709 x 1.575 [18.0 x 40.0] 0.09 0.05 3.25 0.05

672D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 5Document Number: 42054

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

25 WVDC AT 105 °C, SURGE = 35 V

47.0 672D476F025CC5D 0.394 x 0.512 [10.0 x 13.0] 2.35 0.90 0.40 0.85

330.0 672D337F025DT5D 0.492 x 1.319 [12.5 x 33.5] 0.29 0.12 1.75 0.10

470.0 672D477F025DS5D 0.492 x 1.673 [12.5 x 42.5] 0.22 0.08 2.35 0.07

1200.0 672D128F025FV5D 0.709 x 1.575 [18.0 x 40.0] 0.10 0.05 3.20 0.055

40 WVDC AT 105 °C, SURGE = 55 V

220.0 672D227F040EK5D 0.630 x 0.984 [16.0 x 25.0] 0.48 0.14 1.65 0.12

330.0 672D337F040ET5D 0.630 x 1.319 [16.0 x 33.5] 0.32 0.12 2.25 0.08

50 WVDC AT 105 °C, SURGE = 75 V

100.0 672D107F050DT5D 0.492 x 1.319 [12.5 x 33.5] 0.80 0.26 1.15 0.22

150.0 672D157F050EK5D 0.630 x 0.984[16.0 x 25.0] 0.55 0.22 1.30 0.18

220.0 672D227F050ET5D 0.630 x 1.319 [16.0 x 33.5] 0.40 0.15 1.85 0.12

470.0 672D477F050FV5D 0.709 x 1.575 [18.0 x 40.0] 0.25 0.09 2.40 0.095

60 WVDC AT 105 °C, SURGE = 85 V

15.0 672D156F060CD5D 0.394 x 0.512 [10.0 x 13.0] 7.00 2.00 0.28 1.70

22.0 672D226F060CG5D 0.394 x 0.787 [10.0 x 20.0] 4.60 1.20 0.40 1.00

100.0 672D107F060EK5D 0.630 x 0.984 [16.0 x 25.0] 0.90 0.28 1.20 0.24

150.0 672D157F060ET5D 0.630 x 1.319 [16.0 x 33.5] 0.60 0.18 1.65 0.15

75 WVDC AT 105 °C, SURGE = 100 V

12.0 672D126F075CD5D 0.394 x 0.512 [10.0 x 13.0] 8.50 2.20 0.26 1.75

120.0 672D127F075ET5D 0.630 x 1.319 [16.0 x 33.5] 0.68 0.18 1.50 0.16

100 WVDC AT 105 °C, SURGE = 125 V

10.0 672D106F100CD5D 0.394 x 0.630 [10.0 x 16.0] 10.00 2.30 0.26 1.80

33.0 672D336F100DM5D 0.492 x 1.043 [12.5 x 26.5] 2.55 0.55 0.72 0.39

120.0 672D127F100ET5D 0.630 x 1.319 [16.0 x 33.5] 0.68 0.19 1.50 0.17

200 WVDC AT 105 °C, SURGE = 250 V

4.7 672D475F200CG5D 0.394 x 0.787 [10.0 x 20.0] 22.50 1.95 0.31 1.75

15.0 672D156F200DT5D 0.492 x 1.319 [12.5 x 33.5] 7.00 0.58 0.76 0.55

47.0 672D476F200FV5D 0.709 x 1.575 [18.0 x 40.0] 2.30 0.18 1.90 0.165

250 WVDC AT 105 °C, SURGE = 300 V

10.0 672D106F250DT5D 0.492 x 1.319 [12.5 x 33.5] 12.00 1.50 0.48 1.60

ELECTRICAL DATA AND ORDERING INFORMATION - Original ratings

CAPACITANCE (μF) CASE CODE PART NUMBER

6.3 WVDC AT 105 °C, SURGE = 9 V

150.0 CD 672D157H6R3CD5C

220.0 CG 672D227H6R3CG5C

680.0 DM 672D687H6R3DM5C

1000.0 EK 672D108H6R3EK5C

1200.0 DS 672D158H6R3ET5C

3300.0 FV 672D338H6R3FV5C

7.5 WVDC AT 105 °C, SURGE = 10 V

100.0 CC 672D107H7R5CC5C

150.0 CD 672D157H7R5CD5C

680.0 DT 672D687H7R5DT5C

1000.0 ET 672D108H7R5ET5C

2700.0 FV 672D278H7R5FV5C

Note

• Capacitance tolerance code H, -10 %, +100 %; lead code C, cut leads. C lead = negative lead: 0.281" [7.1 mm], ± 0.062" [1.6 mm]; positive

lead: 0375" [9.5 mm], ± 0.062" [1.6 mm]. D lead = 1.0" [25.4 mm] minimum.

ELECTRICAL DATA AND ORDERING INFORMATION

CAPACITANCE

(μF) PART NUMBER NOMINAL CASE SIZE

D x L

MAX. ESR

AT +25 °C ()

MAX. RIPPLE

AT +85 °C (A)

MAX.

IMPEDANCE

AT +25 °C ()

100 kHz

120 Hz 20 kHz 20 kHz TO 100 kHz

672D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 6Document Number: 42054

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

12 WVDC AT 105 °C, SURGE = 16 V

100.0 CC 672D107H012CC5C

150.0 CG 672D157H012CG5C

470.0 DM 672D477H012DM5C

680.0 DT 672D687H012DT5C

1000.0 DS 672D108H012DS5C

2200.0 FV 672D228H012FV5C

15 WVDC AT 105 °C, SURGE = 20 V

100.0 CD 672D107H015CD5C

150.0 CG 672D157H015CG5C

470.0 DT 672D477H015DT5C

680.0 EK 672D687H015EK5C

820.0 DS 672D827H015DS5C

1000.0 ET 672D108H015ET5C

1800.0 FV 672D188H015FV5C

20 WVDC AT 105 °C, SURGE = 30 V

68.0 CD 672D868H020CD5C

100.0 CG 672D107H020CG5C

330.0 DM 672D337H020DM5C

470.0 EK 672D477H020EK5C

560.0 DS 672D567H020DS5C

680.0 ET 672D687H020ET5C

1500.0 FV 672D158H020FV5C

25 WVDC AT 105 °C, SURGE = 35 V

47.0 CC 672D476H025CC5C

68.0 CD 672D686H025CD5C

330.0 DT 672D337H025DT5C

470.0 DS 672D477H025DS5C

680.0 EU 672D687H025EU5C

1200.0 FV 672D128H025FV5C

40 WVDC AT 105 °C, SURGE = 55 V

47.0 CD 672D476H040CD5C

220.0 EK 672D227H040EK5C

330.0 ET 672D337H040ET5C

390.0 DS 672D397H040DS5C

820.0 FV 672D827H040FV5C

50 WVDC AT 105 °C, SURGE = 75 V

22.0 CD 672D226H050CD5C

100.0 DT 672D107H050DT5C

150.0 EK 672D157H050EK5C

180.0 DS 672D187H050DS5C

220.0 ET 672D227H050ET5C

470.0 FV 672D477H050FV5C

60 WVDC AT 105 °C, SURGE = 85 V

15.0 CD 672D156H060CD5C

22.0 CG 672D226H060CG5C

68.0 DM 672D686H060DM5C

100.0 EK 672D107H060EK5C

120.0 DS 672D127H060DS5C

150.0 ET 672D157H060ET5C

390.0 FV 672D397H060FV5C

ELECTRICAL DATA AND ORDERING INFORMATION - Original ratings

CAPACITANCE (μF) CASE CODE PART NUMBER

Note

• Capacitance tolerance code H, -10 %, +100 %; lead code C, cut leads. C lead = negative lead: 0.281" [7.1 mm], ± 0.062" [1.6 mm]; positive

lead: 0375" [9.5 mm], ± 0.062" [1.6 mm]. D lead = 1.0" [25.4 mm] minimum.

672D

www.vishay.com Vishay Sprague

Revision: 18-Jul-16 7Document Number: 42054

For technical questions, contact: aluminumcaps4@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the

lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.

75 WVDC AT 105 °C, SURGE = 100 V

12.0 CD 672D126H075CD5C

18.0 CG 672D186H075CG5C

82.0 EK 672D826H075EK5C

120.0 ET 672D127H075ET5C

270.0 FV 672D277H075FV5C

100 WVDC AT 105 °C, SURGE = 125 V

8.2 CC 672D825H100CC5C

10.0 CD 672D106H100CD5C

33.0 DM 672D336H100DM5C

68.0 EK 672D686H100EK5C

120.0 ET 672D127H100ET5C

180.0 FV 672D187H100FV5C

150 WVDC AT 105 °C, SURGE = 200 V

6.8 CG 672D685H150CG5C

22.0 DT 672D226H150DT5C

39.0 ET 672D396H150ET5C

68.0 FV 672D686H150FV5C

200 WVDC AT 105 °C, SURGE = 250 V

4.7 CG 672D475H200CG5C

15.0 DT 672D156H200DT5C

27.0 ET 672D276H200ET5C

47.0 FV 672D476H200FV5C

250 WVDC AT 105 °C, SURGE = 300 V

8.2 DM 672D825H250DM5C

10.0 DT 672D106H250DT5C

22.0 ET 672D226H250ET5C

39.0 FV 672D396H250FV5C

ELECTRICAL DATA AND ORDERING INFORMATION - Original ratings

CAPACITANCE (μF) CASE CODE PART NUMBER

Note

• Capacitance tolerance code H, -10 %, +100 %; lead code C, cut leads. C lead = negative lead: 0.281" [7.1 mm], ± 0.062" [1.6 mm]; positive

lead: 0375" [9.5 mm], ± 0.062" [1.6 mm]. D lead = 1.0" [25.4 mm] minimum.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

672D127F060DS3J 672D686H060DM5J 672D336H100EK5J 672D336H100DM5J 672D187H050DS5J

672D686F060DM5J 672D397H020DM5J 672D397H040DS5J 672D337H040ET5J 672D108F012DS3J

672D108F012DS5J 672D687H6R3DM5J 672D397H040ET5J 672D786H100DT5J 672D127F100EN4J

672D477F025ET4J 672D127F100EK4D 672D477F050FV4D 672D107F020CG4I 672D108F012DS4D

672D187F100FV4D 672D106F100CD4D 672D157F015CG4D 672D157F015CG4I 672D158F020FV4D

672D276F200EN4D 672D277F040DT2D 672D336F100DM4D 672D337F025DT4D 672D686F100EK4D

672D686F150FV4D 672D476F200FV4D 672D687F6R3DM4D 672D226H060CG5C 672D336H020BB5C

672D337H020DM5C 672D186H040BB5C 672D396H150ET5C 672D107H012CC5C 672D477H012DM5J

672D477H012DM5C 672D277H025DM3C 672D477F012DM5D 672D227F6R3CG5D 672D396H250FV5C

672D074A1 672D092A1 672D1060 672D1062 672D1064 672D1065 672D1068 672D1071 672D1073 672D1100

672D156H200DT5C 672D187H050DM5C 672D477H050FV5J 672D686H060DM5D 672D825F250DG5D

672D566H040CD5C 672D227H040EK5C 672D227H040EK5D 672D107F060EK5D 672D107H060EK5C

672D687F012DT5D 672D687H6R3DM5C 672D687H6R3DM5D 672D567H020ET5C 672D687F6R3DM5D

672D686F025CD5D 672D477H025ET5R 672D158H020FV5C 672D106H250DT5C 672D686F100EK5D

672D686H100EK5C 672D187H050DS5C 672D227H050ET5C 672D227F050ET3D 672D227F050ET5D

672D476H040CD5C 672D127H075ET5C 672D108H012DS2C 672D127F100ET3D 672D685H150CG5C

672D397H040ET5C 672D477F020EK5D 672D226H150DT5C 672D226F150DT5D 672D475H100CC5C

672D687H020ET5C 672D226F050CD5D 672D226H050CD5C 672D477H025DS3R 672D826H050DM5D

672D826H050DM5C 672D477H025DS5C 672D477F025DS5D 672D336H100DM5C 672D156H060CD5C