GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 107
Electrical 1 x 105at 80 A 14 VDC Res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 500 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms contact to contact
Insulation Resistance 100 megohms min. at 500 VDC, 20°C
50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature
Operating -40°C (-40°F) to 85°C (185°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 0.062" DA at 10-55 Hz
Shock 10 g
Enclosure PA (UL94: V-0)
Terminals Copper alloy
PCB
Max Solder Temp. 270°C (518°F)
Max Solder Time 5 seconds
Max Solvent Temp. 80°C (176°F)
Max Immersion Time 30 seconds
Weight 40 grams
AZ
3/10/09
COIL
Power
At Pickup Voltage 0.76 W
(typical)
Max. Continuous 3.0 W at 20°C (68°F)
Dissipation
Temperature Rise 68°C (122°F) at nominal coil voltage
Temperature Max.155°C (311°F)
CONTACTS
Arrangement SPST (N.O.) (1 Form A)
SPDT (1 Form C), SPST (N.C.) (1 Form B)
Ratings Resistive load:
Max. switched power: 1120 W (SPST) Form A
840 W (N.O.) Form C
840 W (N.C.) Form C, Form B
Max. switched current: 80 A (SPST) Form A
60 A (N.O.) Form C
60 A (N.C.) Form C, Form B
Max. switched voltage: 30 VDC
Material Silver tin oxide
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method)
AZ983
80 AMP MINI-ISO
AUTOMOTIVE RELAY
FEATURES
•PCB terminals
•80 Amp contact rating
•High momentary carry current
•High operating temperature (85°C)
•SPST N.O. (1 Form A), SPDT (1 Form C),
SPST N.C. (1 Form B)
• ISO/TS 16949, ISO14001
• Tested in accordance with SAE J2544
• Epoxy sealed version available
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
AZ
3/10/09
RELAY ORDERING DATA
COIL SPECIFICATIONS ORDER NUMBER*
Nominal Coil Must Operate Max. Continuous Coil Resistance SPST (N.O.) SPDT
VDC VDC VDC ± 10%
6 3.9 7.8 20 AZ983–1A–6D AZ983–1C–6D
12 7.8 15.6 80 AZ983–1A–12D AZ983–1C–12D
24 15.6 31.2 320 AZ983–1A–24D AZ983–1C–24D
*For SPST (N.C.) (1 Form B) relay, substitute “-1B” for “-1A”. Add suffix “R” for resistor in parallel with coil. Resistor values: 6V: 180 ohms, 12V: 680
ohms, 24V: 2700 ohms. Add suffix “D” for diode across coil option (+ pole at terminal #86) Add Suffix “E for epoxy sealed version.
AZ983
MECHANICAL DATA
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
[1.5]
2 x .058
[9.5]
3 x .374
[1.6]
9 x .063
[1.2]
3 x .047
[1.5]
3 x .059
[3.8]
3 x .150
[0.8]
2 x .032
[6.3]
2 x .248
[29.0]
1.142
[28.0]
1.102
[1.5]
2 x .059
[2.9]
2 x .116
FORM C VERSION SHOWN
86
85
87A
30
86
87
85
30
FORM C VERSION SHOWN
VIEWED TOWARD TERMINALS
PC BOARD LAYOUT
1 FORM C
87
86
30
87A
85
1 FORM B1 FORM A
VIEWED TOWARD TERMINALS
WIRING DIAGRAMS
[3.5]
.137
[10.6]
.418 [3.8]
2 x .150
[7.6]
2 x .300
[ø 1.93 ± .076]
2 x ø .076 ± .003
[8.5]
.335
[17.0]
.669
[9.9]
.390
[ø 2.18 ± .076]
9 x ø .086 ± .003
[8.4]
.331
[8.0]
.315
