VSMF143TSG1-010 - Raltron Electronics Corp.

SURFACE MOUNT VCXO

RALTRON  10651 N.W. 19th St  Miami, Florida 33172  U.S.A.

Phone: (305) 593-6033  Fax: (305) 594-3973  e-mail: sales@raltron.com  web: http://www.raltron.com

VSMF SERIES: Multi-Frequency Voltage Control Crystal Oscillator with Low Jitter Output

10MHz – 1200MHz

PRODUCT DESCRIPTION

The VSMF clock series is a cutting edge family of High Frequency, Low Jitter Output, Multi-Frequency VCXO

based on an advanced digital PLL platform. The VSMF oscillators are available in a 7x5mm ceramic package

with output frequency from 10MHz to 1.2 GHz. The VSMF units are pre-programmed with up to 2 different output

frequencies, any of which are user selected. Such flexibility significantly reduces design cycle time and overall

cost. The VSMF oscillator design incorporates a low frequency crystal along with low Jitter frequency

synthesizer to provide a wide range of frequencies. The VSMF Clocks are available in LVCMOS, LVPECL and

LVDS outputs, making them suitable for a wide range of applications.

APPLICATION

 SONET/SDH

 FIBRE CHANNEL

 10G,100G, GIGABIT ETHERNET

 CLOCK / DATA RECOVERY

 TEST AND MEASUREMENT

ELECTRICAL SPECIFICATION

Notes

1See part numbering table

2 Contact factory

PARAMETER SYMBOL CONDITIONS VALUE UNIT

Frequency, nominal fO Up to 2 available output frequencies 10 -1200 MHz

Supply voltage, nom. VCC 2.5 or 3.3 V

Supply current Is Typical (depending on output) 35 ~ 45 mA

VOH Vcc -1.4 ~ Vcc - 0.9 V

LVPECL output levels VOL Output termination 50Ω ~ Vcc - 2.0V Vcc - 2.0 ~ Vcc - 1.7 V

LVPECL output voltage swing Vp-p Output termination 50Ω ~ Vcc - 2.0V 0.6 ~ 1.0 V

LVDS differential output voltage ∆VOD 350 mV

LVDS offset voltage, typical VOS 100Ω termination between outputs 1.25 V

LVCMOS / LVTTL output levels VOH / VOL min/max 0.7Vcc / 0.3Vcc V

Duty cycle DC Load = 10kΩ // 20pF 40/60 or 45/55 %

Rise/ fall time, max. tr / tf 20% - 80% (VOL, VOH) 0.6 ns

Absolute Pull Range APR Min guaranteed freq. pull over ∆f/fc ±32,50,80,100 ppm

Control Voltage VC Centered = ½ (Vcc) 1.25, 1.65 V

Control Voltage Range Positive Slope; 10% Linearity, max 0.3 ~ 0.9 (Vcc) V

Modulation Bandwidth, min BW -3dB 10 KHz

RMS phase jitter J Typical 0.8 ps

Overall freq. stability, max.1 ∆f/fc Various available, specified when ordered ±20 ~ ±100. ppm

Enable / Disable En / Dis Min (logic 1) / Max (logic 0) 0.7 (Vcc) / 0.3 (Vcc) V

Operating temperature Ta -40 ~ +85 °C

Storage temperature T(stg) Absolute max -45 ~ +100 °C

Absolute voltage range Vcc(abs) Vcc ± 0.5 V

SURFACE MOUNT VCXO

RALTRON  10651 N.W. 19th St  Miami, Florida 33172  U.S.A.

Phone: (305) 593-6033  Fax: (305) 594-3973  e-mail: sales@raltron.com  web: http://www.raltron.com

123

.197 ±.008

.276 ±.008

7.0 ±0.2

5.0 ±0.2

INDICATES PIN 1.

.079 MAX.

2.00 MAX.

.200

.100

5.08

2.54

.150

3.81

.055

1.40 TYP.

.050

1.27

.079 TYP.

2.00 TYP.

.129

3.28

.100

2.54

.071

1.80

SOLDER PATTERN

2.20

.087

MECHANICAL SPECIFICATION

Notes

2 VC available on pin 1 or 2. See options on part numbering table.

3 Frequency Select pin (SEL)

Logic 1 (NC) = Output Frequency 1 (First frequency listed in part # is automatically available. Customer specified at time of order)

Logic 0 = Output Frequency 2 (Second frequency listed in part # is available. Customer sets SEL pin to Low)

PART NUMBERING SYSTEM:

SERIES NUMBER OF

OUTPUTS OUTPUT

SUPPLY

VOLTAGE

(V)

SYMMETRY

(%)

TEMP

RANGE

(°C)

APR

(ppm)

VC and SEL

Option

OUTPUT FREQUENCY

(MHz)

Surface

mount

Multi-

frequency

Clock

Oscillator

1: Single Output

2: Dual Output

9: LVPECL

8: LVDS

4: LVCMOS

1: Vcc =2.5

3: Vcc =3.3

A: 40/60

T: 45/55

R: 0~50

S: 0~70

U: -20~70

V: -40~85

F: ±32

H:±50

G:±80

J:±100 4

15: Pin 1= VC

2: Pin 1 = SEL

XXX.XXX-YYY.YYY

Freq1- Freq 2

VSMF 2 9 3 A S H 2 - XXX-YYY

Notes

4 ± 100ppm APR may not be available with all frequencies and operating temperature ranges

5 Pin 1= VC is default configuration.

EXAMPLE: VSMF293ASH2-622-311

Clock Oscillator, 7x5mm package, Dual output, LVPECL, +3.3V Supply, 40/60 Symmetry, 0~+70°C Operating

Temperature Range, ±50ppm APR, Select on pin 1, 622.080 MHz and 311.040MHz output frequency.

OUTLINE TOLERANCE

IF NOT SPECIFIED

±0.015” / 0.4mm

PIN FUNCTIONS:

[1] CONTROL VOLTAGE (VC) 2

[2] FREQ. SELECT (SEL) 3

[3] GROUND

[4] OUTPUT

[5] COMP. OUTPUT

[6] SUPPLY VOLTAGE

MARKING:

VSMF293 – (family)

ASH X-Y– (frequency codes)

R D/C – (factory date code)

*0.01uF external bypass capacitor is

recommended as seen in solder pattern

SURFACE MOUNT VCXO

RALTRON  10651 N.W. 19th St  Miami, Florida 33172  U.S.A.

Phone: (305) 593-6033  Fax: (305) 594-3973  e-mail: sales@raltron.com  web: http://www.raltron.com

REFLOW PROFILE:

Reflow profile IPC/JEDEC J-STD-020 REV. C

Temperature Min Preheat TSMIN 150°C

Temperature Max Preheat TSMAX 200°C

Time (TSMIN to TSMAX) tS 60-180 sec.

Temperature TL 217°C

Peak Temperature TP 260°C

Ramp-up rate RUP 3°C/sec max.

Ramp-down rate RDOWN 6°C/sec max.

Time within 5°C of Peak Temperature tP 20-40 sec.

Time t[25°C] to Peak Temperature t[25°C] to Peak 480 sec.

Time tL 60-150 sec.

Temp.

[

°C

]

Time

[

sec

]

TSMAX

TSMIN

Ramp-up

Ramp-down

Critical Zone

to T

t[25°C] to Peak

tS Preheat