RAYCHEM Tubing Products 1 TAT-125 Heat-shrinkable Tubing Adhesive-Lined, Flexible, Polyolefin Tubing Product Facts 2:1 shrink ratio Thin adhesive lining that bonds to outer tubing and surface below, forming a positive environmental seal Flexibility of both tubing and adhesive Moisture seal that is resistant to bending of the substrate Good mechanical strength and cut-through resistance Adhesive that bonds to a wide variety of plastics, rubbers, and metals, including polyethylene, neoprene, lead, and steel RoHS compliant Applications Installation Operating Temperature Range Seals and protects simple in-line splices, bimetallic joints, and components from fluids, moisture, and corrosion. Repairs damaged wire insulation, especially where flexibility is required. Provides onestep electrical insulation and moisture sealing. Minimum shrink temperature: 95C [203F] -55C to 110C [-67F to 230F] Minimum full recovery temperature: 121C [250F] Specifications/Approvals Series UL* Military Raychem TAT-125 Type 1 (colors) E85381 600 V, 125C -- AMS-DTL-23053/4*, Class 2 RW-3032 -- RW-3032 TAT-125 Type 2 (clear) *Formerly MIL-I-23053/4 and MIL-DTL-23053/4. Sizes 1/4" through 1 1/2" only. Available in: Americas Europe Asia Pacific 1-119 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666 RAYCHEM Tubing Products TAT-125 (Continued) Product Dimensions Inside Diameter Maximum Minimum Expanded Recovered After Heating as Supplied 3.2 [0.125] 1.6 [0.062] 4.8 [0.187] 2.4 [0.093] 6.4 [0.250] 3.2 [0.125] 9.5 [0.375] 4.8 [0.187] 12.7 [0.500] 6.4 [0.250] 19.1 [0.750] 9.5 [0.375] 25.4 [1.000] 12.7 [0.500] 38.1 [1.500] 19.1 [0.750] Size 1/8 3/16 1/4 3/8 1/2 3/4 1 1 1/2 Recovered Wall Thickness** Total Wall Adhesive Wall After Heating After Heating (Nominal) (Nominal) 0.69 [0.027] 0.23 [0.009] 0.71 [0.028] 0.25 [0.010] 0.74 [0.029] 0.13 [0.005] 0.74 [0.029] 0.13 [0.005] 0.76 [0.030] 0.15 [0.006] 0.89 [0.035] 0.15 [0.006] 1.07 [0.042] 0.20 [0.008] 1.19 [0.047] 0.28 [0.011] **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Nonstandard Size selection Standard packaging Ordering description Black (-0) White (-9), red (-2), blue (-6), yellow (-4), green (-5), brown (-1), orange (-3), violet (-7), gray (-8), clear (-X , not flame-retardant) Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. In 1.2-meter [4-foot] lengths. Specify product name, size and color (for example, TAT-125 1/4-0). 1-120 9-1773447-9 CIS WR 08/2011 te.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-475-6222 Mexico: 52-55-1106-0800 L. & S. America: 54-11-4733-2200 Germany: 49-6251-133-1999 China: 86-400-820-6015 Japan: 81-44-844-8013 UK: 44-800-267-666