SDFS077A - D2932, MARCH 1987 - REVISED OCTOBER 1993 SN54F374 . . . J PACKAGE SN74F374 . . . DB, DW, OR N PACKAGE (TOP VIEW) Eight D-Type Flip-Flops in a Single Package 3-State Bus-Driving True Outputs Full Parallel Access for Loading Buffered Control Inputs Package Options Include Plastic Small-Outline (SOIC) and Shrink Small-Outline (SSOP) Packages, Ceramic Chip Carriers, and Plastic and Ceramic DIPs OE 1Q 1D 2D 2Q 3Q 3D 4D 4Q GND description These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC 8Q 8D 7D 7Q 6Q 6D 5D 5Q CLK 1D 1Q OE VCC SN54F374 . . . FK PACKAGE (TOP VIEW) The eight flip-flops of the F374 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs. 2D 2Q 3Q 3D 4D 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 8D 7D 7Q 6Q 6D 4Q GND CLK 5Q 5D A buffered output enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without need for interface or pullup components. 8Q * * * * * The output enable (OE) input does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. The SN74F374 is available in TI's shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area. The SN54F374 is characterized for operation over the full military temperature range of -55C to 125C. The SN74F374 is characterized for operation from 0C to 70C. FUNCTION TABLE (each flip-flop) INPUTS OE CLK D OUTPUT Q L H H L L L L H or L X Q0 H X X Z Copyright 1993, Texas Instruments Incorporated !" # $%&" !# '%()$!" *!"&+ *%$"# $ " #'&$$!"# '& ",& "&# &-!# #"%&"# #"!*!* .!!"/+ *%$" '$&##0 *&# " &$&##!)/ $)%*& "&#"0 !)) '!!&"&#+ POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2-1 SDFS077A - D2932, MARCH 1987 - REVISED OCTOBER 1993 logic symbol OE CLK 1 11 logic diagram (positive logic) OE EN C1 CLK 1 11 C1 1D 2D 3D 4D 5D 6D 7D 8D 3 2 1D 4 5 7 6 8 9 13 12 14 15 17 16 18 19 1Q 1D 3 2 1Q 1D 2Q 3Q 4Q 5Q To Seven Other Channels 6Q 7Q 8Q This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -1.2 V to 7 V Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -30 mA to 5 mA Voltage range applied to any output in the disabled or power-off state . . . . . . . . . . . . . . . . . . . -0.5 V to 5.5 V Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to VCC Current into any output in the low state: SN54F374 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA SN74F374 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 mA Operating free-air temperature range: SN54F374 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55C to 125C SN74F374 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed. recommended operating conditions SN54F374 SN74F374 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IIK Low-level input voltage 0.8 0.8 V Input clamp current -18 -18 mA IOH IOL High-level output current -3 -3 mA Low-level output current 20 24 mA TA Operating free-air temperature 70 C 2-2 High-level input voltage 2 -55 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2 125 0 V V SDFS077A - D2932, MARCH 1987 - REVISED OCTOBER 1993 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH SN54F374 TYP MAX TEST CONDITIONS VCC = 4.5 V, VCC = 4.5 V VCC = 4.75 V, MIN II = - 18 mA IOH = - 1 mA -1.2 IOH = - 3 mA IOH = - 1 mA to - 3 mA VOL VCC = 4.5 V IOL = 20 mA IOL = 24 mA IOZH IOZL VCC = 5.5 V, VCC = 5.5 V, VO = 2.7 V VO = 0.5 V II IIH VCC = 5.5 V, VCC = 5.5 V, IIL IOS VCC = 5.5 V, VCC = 5.5 V, SN74F374 TYP MAX MIN -1.2 2.5 3.4 2.5 3.4 2.4 3.3 2.4 3.3 UNIT V V 2.7 0.3 0.5 0.35 0.5 V 50 50 A -50 -50 A VI = 7 V VI = 2.7 V 0.1 0.1 mA 20 20 A VI = 0.5 V VO = 0 - 0.6 - 0.6 mA -150 mA 86 mA -60 -150 -60 ICCZ VCC = 5.5 V, See Note 2 55 86 55 All typical values are at VCC = 5 V, TA = 25C. Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second. NOTE 2: ICCZ is measured with OE at 4.5 V and all other inputs grounded. timing requirements over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) VCC = 5 V, TA = 25C SN54F374 SN74F374 F374 fclock Clock frequency tw Pulse duration tsu Setup time, data before CLK th Hold time, data after CLK MIN MAX MIN MAX MIN MAX 0 100 0 60 0 70 CLK high 7 7 7 CLK low 6 6 6 High 2 2.5 2 Low 2 2 2 High 2 2 2 Low 2 2.5 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT MHz ns ns ns 2-3 SDFS077A - D2932, MARCH 1987 - REVISED OCTOBER 1993 switching characteristics (see Note 3) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 5 V, CL = 50 pF, RL = 500 , TA = 25C VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 , TA = MIN to MAX F374 MIN fmax tPLH TYP MAX 100 UNIT SN54F374 SN74F374 MIN MIN MAX 60 MAX 70 MHz 3.2 6.1 8.5 3.2 10.5 3.2 10 3.2 6.1 8.5 3.2 11 3.2 10 1.2 8.6 11.5 1.2 14 1.2 12.5 1.2 5.4 7.5 1.2 10 1.2 8.5 1.2 4.9 7 1.2 8 1.2 8 tPLZ 1.2 3.9 5.5 1.2 7.5 1.2 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. NOTE 3: Load circuits and waveforms are shown in Section 1. 6.5 tPHL tPZH tPZL tPHZ 2-4 CLK Q OE Q OE Q POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 ns ns ns PACKAGE OPTION ADDENDUM www.ti.com 25-Jan-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) 5962-9759001Q2A ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-9759001QRA ACTIVE CDIP J 20 1 TBD Call TI Call TI 5962-9759001QRA ACTIVE CDIP J 20 1 TBD Call TI Call TI 5962-9759001QSA ACTIVE CFP W 20 1 TBD Call TI Call TI 5962-9759001QSA ACTIVE CFP W 20 1 TBD Call TI Call TI JM38510/34105B2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type JM38510/34105B2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type JM38510/34105BRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type JM38510/34105BRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type JM38510/34105BSA ACTIVE CFP W 20 1 TBD Call TI N / A for Pkg Type JM38510/34105BSA ACTIVE CFP W 20 1 TBD Call TI N / A for Pkg Type M38510/34105B2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type M38510/34105B2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type M38510/34105BRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type M38510/34105BRA ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type M38510/34105BSA ACTIVE CFP W 20 1 TBD Call TI N / A for Pkg Type M38510/34105BSA ACTIVE CFP W 20 1 TBD Call TI N / A for Pkg Type SN54F374J ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type 1 N / A for Pkg Type SN54F374J ACTIVE CDIP J 20 TBD A42 SN74F374DBLE OBSOLETE SSOP DB 20 TBD Call TI Call TI SN74F374DBLE OBSOLETE SSOP DB 20 TBD Call TI Call TI SN74F374DBR ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DBR ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DBRE4 ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DBRE4 ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DBRG4 ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 (3) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 25-Jan-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) SN74F374DBRG4 ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWR ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWR ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374N ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74F374N ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74F374N3 OBSOLETE PDIP N 20 TBD Call TI Call TI SN74F374N3 OBSOLETE PDIP N 20 TBD Call TI Call TI SN74F374NE4 ACTIVE PDIP N 20 SN74F374NE4 ACTIVE PDIP N SN74F374NSR ACTIVE SO NS 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 20 2000 Green (RoHS & no Sb/Br) Addendum-Page 2 (3) CU NIPDAU Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 25-Jan-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) SN74F374NSR ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374NSRE4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374NSRE4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374NSRG4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74F374NSRG4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SNJ54F374FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type SNJ54F374FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type SNJ54F374J ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type SNJ54F374J ACTIVE CDIP J 20 1 TBD A42 N / A for Pkg Type SNJ54F374W ACTIVE CFP W 20 1 TBD Call TI N / A for Pkg Type SNJ54F374W ACTIVE CFP W 20 1 TBD Call TI N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 25-Jan-2012 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54F374, SN74F374 : * Catalog: SN74F374 * Military: SN54F374 NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Military - QML certified for Military and Defense Applications Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74F374DBR SSOP DB 20 2000 330.0 16.4 8.2 7.5 2.5 12.0 16.0 Q1 SN74F374DWR SOIC DW 20 2000 330.0 24.4 10.8 13.0 2.7 12.0 24.0 Q1 SN74F374NSR SO NS 20 2000 330.0 24.4 8.2 13.0 2.5 12.0 24.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74F374DBR SSOP DB 20 2000 367.0 367.0 38.0 SN74F374DWR SOIC DW 20 2000 367.0 367.0 45.0 SN74F374NSR SO NS 20 2000 367.0 367.0 45.0 Pack Materials-Page 2 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated