Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. MC78LXXA / LM78LXXA 3-Terminal 0.1 A Positive Voltage Regulator Features Description * * * * * The MC78LXXA / LM78LXXA series of fixed-voltage monolithic integrated circuit voltage regulators are suitable for applications that required supply current up to 100 mA. Maximum Output Current of 100 mA Output Voltage of 5 V, 6 V, 8 V, 12 V, and 15 V Thermal Overload Protection Short-Circuit Current Limiting Output Voltage Offered in 5% Tolerance TO-92 SOT-89 8-SOIC GND 8 1 1 23 1. Output 2. GND 3. Input 2 3 1 1. Output 2. GND 3. GND 4. NC 5. NC 6. GND 7. GND 8. Input Ordering Information Product Number Package Packing Method Output Voltage Tolerance Operating Temperature LM78L05ACZ Bulk LM78L05ACZX Tape & Reel LM78L05ACZXA Ammo LM78L12ACZ Bulk LM78L12ACZX Tape & Reel MC78L05ACP TO-92 Bulk MC78L05ACPXA Ammo MC78L06ACP Bulk MC78L08ACP Bulk MC78L15ACP Bulk MC78L15ACPXA Ammo MC78L05ACD MC78L05ACDX MC78L05ACHX MC78L08ACHX 8-SOIC SOT-89 (c) 2002 Fairchild Semiconductor Corporation MC78LXXA / LM78LXXA Rev. 1.9 5% -40 to +125C Rail Tape & Reel Tape & Reel Tape & Reel www.fairchildsemi.com MC78LXXA / LM78LXXA -- 3-Terminal 0.1 A Positive Voltage Regulator July 2015 InpuVt I 3 THERMAL SHUTDOWN CIRCUIT I + REFERENCE VOLTAGE - SHORT- CIRCUIT PROTECTION RSC V 0 Outpu t GND 1 2 Figure 1. Block Diagram Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Symbol VI TOPR TJ(MAX) Parameter Value Input Voltage VO = 5 V to 8 V 30 V VO = 12 V to 15 V 35 V -40 to +125C C Operating Temperature Range 150 C -65 to +150 C 50 C/W TO-92 150 C/W SOT-89 225 C/W 8-SOIC 160 C/W Maximum Junction Temperature TSTG Storage Temperature Range RJC Thermal Resistance, Junction-Case RJA Thermal Resistance, Junction-Air (c) 2002 Fairchild Semiconductor Corporation MC78LXXA / LM78LXXA Rev. 1.9 Unit TO-92 www.fairchildsemi.com 2 MC78LXXA / LM78LXXA -- 3-Terminal 0.1 A Positive Voltage Regulator Block Diagram VI = 10 V, IO = 40 mA, -40C TJ 125C, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Parameter Output Voltage Conditions TJ = 25C VO Line Regulation(1) TJ = 25C VO Load Regulation(1) TJ = 25C VO Output Voltage IQ Quiescent Current IQ 4.8 7 V VI 20 V 7V VI VMAX(2) 5.0 5.2 V 8 150 mV 8 V VI 20 V 6 100 mV 1 mA IO 100 mA 11 60 mV 1 mA IO 40 mA 5.0 1 mA IO 40 mA 1 mA IO 70 mA 4.75 TJ = 25C With Line Unit 7 V VI 20 V 2.0 8 V VI 20 V IQ Quiescent Current Change VN Output Noise Voltage TA = 25C, 10 Hz f 100 kHz Temperature Coefficient of VO IO = 5 mA RR Ripple Rejection f = 120 Hz, 8 V VI 18 V, TJ = 25C VD Dropout Voltage TJ = 25C VO/T Min. Typ. Max. With Load 1 mA IO 40 mA 41 30.0 mV 5.25 V 5.25 V 5.5 mA 1.5 mA 0.1 mA 40 V/Vo -0.65 mV/C 80 dB 1.7 V Notes: 1. The maximum steady-state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represents pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD 0.75 W. (c) 2002 Fairchild Semiconductor Corporation MC78LXXA / LM78LXXA Rev. 1.9 www.fairchildsemi.com 3 MC78LXXA / LM78LXXA -- 3-Terminal 0.1 A Positive Voltage Regulator Electrical Characteristics (MC78L05A / LM78L05A) VI = 12 V, IO = 40 mA, -40C TJ 125C, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Parameter Output Voltage Conditions TJ = 25C VO Line Regulation(3) TJ = 25C VO Load Regulation(3) TJ = 25C 6.0 6.25 V 8.5 V VI 20 V 5.75 64 175 mV 9 V VI 20 V 54 125 mV 12.8 80.0 mV 5.8 1 mA IO 100 mA 1 mA IO 70 mA 8.5 V VI 20 V, 1 mA IO 40 mA VO Output Voltage IQ Quiescent Current IQ IQ Quiescent Current Change VN Output Noise Voltage TA = 25C, 10 Hz f 100 kHz Temperature Coefficient of VO IO = 5 mA RR Ripple Rejection f = 120 Hz, 10 V VI 20 V, TJ = 25C VD Dropout Voltage TJ = 25C VO/T 8.5 V VI Min. Typ. Max. Unit VMAX(4), 1 mA IO 70 mA 40.0 mV 5.7 6.3 V 5.7 6.3 V TJ = 25C TJ = 125C With Line With Load 3.9 9 V VI 20 V 1 mA IO 40 mA 5.5 mA 6.0 mA 1.5 mA 0.1 40 mA 40 V/Vo 0.75 mV/C 46 dB 1.7 V Notes: 3. The maximum steady-state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represents pulse test conditions with junction temperature as indicated at the initiation of tests. 4. Power dissipation PD 0.75 W. (c) 2002 Fairchild Semiconductor Corporation MC78LXXA / LM78LXXA Rev. 1.9 www.fairchildsemi.com 4 MC78LXXA / LM78LXXA -- 3-Terminal 0.1 A Positive Voltage Regulator Electrical Characteristics (MC78L06A) VI = 14 V, IO = 40 mA, -40C TJ 125C, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Parameter Conditions Output Voltage TJ = 25C VO Line Regulation(5) TJ = 25C VO Load Regulation(5) TJ = 25C VO Output Voltage IQ Quiescent Current IQ 8.0 8.3 V 10 175 mV 11 V VI 23 V 8 125 mV 1 mA IO 100 mA 15 80 mV 1 mA IO 40 mA VMAX(6) Quiescent Current Change VN Output Noise Voltage Unit 10.5 V VI 23 V 40 mV 1 mA IO 40 mA 7.6 8 8.4 V 1 mA IO 70 mA 7.6 8.4 V TJ = 25C With Line IQ VO/T 7.7 10.5V VI 23V 10.5V VI Min. Typ. Max. 2.0 11 V VI 23 V With Load 1 mA IO 40 mA TA = 25C, 10 Hz f 100 kHz Temperature Coefficient of VO IO = 5 mA RR Ripple Rejection f = 120 Hz, 11 V VI 21 V, TJ = 25C VD Dropout Voltage TJ = 25C 39 5.5 mA 1.5 mA 0.1 mA 60 V/Vo -0.8 mV/C 70 dB 1.7 V Notes: 5. The maximum steady-state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represents pulse test conditions with junction temperature as indicated at the initiation of tests. 6. Power dissipation PD 0.75 W. (c) 2002 Fairchild Semiconductor Corporation MC78LXXA / LM78LXXA Rev. 1.9 www.fairchildsemi.com 5 MC78LXXA / LM78LXXA -- 3-Terminal 0.1 A Positive Voltage Regulator Electrical Characteristics (MC78L08A) VI = 19 V, IO = 40 mA, -40C TJ 125C, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Parameter Output Voltage Conditions TJ = 25C VO Line Regulation (7) TJ = 25C VO Load Regulation (7) TJ = 25C VO Output Voltage IQ Quiescent Current IQ 12.0 12.5 V 14.5 V VI 27 V 20 250 mV 16 V VI 27 V 15 200 mV 1 mA IO 100 mA 20 100 mV 1 mA IO 40 mA VMAX(8) 50 mV 1 mA IO 40 mA 11.4 10 12.6 V 1 mA IO 70 mA 11.4 12.6 V 6.0 mA With Line 16 V VI 27 V TJ = 25C 1.5 mA With Load 1 mA IO 40 mA 0.1 mA IQ Quiescent Current Change VN Output Noise Voltage VO/T 11.5 14.5 V VI 27 V 14.5 V VI Min. Typ. Max. Unit 2.1 TA = 25C, 10 Hz f 100 kHz Temperature Coefficient of VO IO = 5 mA RR Ripple Rejection f = 120 Hz, 15 V VI 25 V, TJ = 25C VD Dropout Voltage TJ = 25C 37 80 V/Vo -1.0 mV/C 65 dB 1.7 V Notes: 7. The maximum steady-state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represents pulse test conditions with junction temperature as indicated at the initiation of tests. 8. Power dissipation PD 0.75 W. (c) 2002 Fairchild Semiconductor Corporation MC78LXXA / LM78LXXA Rev. 1.9 www.fairchildsemi.com 6 MC78LXXA / LM78LXXA -- 3-Terminal 0.1 A Positive Voltage Regulator Electrical Characteristics (MC78L12A / LM78L12A) VI = 23 V, IO = 40 mA, -40C TJ 125C, CI = 0.33 F, CO = 0.1 F, unless otherwise specified. Symbol VO Parameter Output Voltage Conditions TJ = 25C VO Line Regulation(9) TJ = 25C VO Load Regulation(9) TJ = 25C VO Output Voltage IQ Quiescent Current IQ VMAX(10) 15.0 15.6 V 17.5 V VI 30 V 25 300 mV 20 V VI 30 V 20 250 mV 1 mA IO 100 mA 25 150 mV 1 mA IO 40 mA 12 75 mV 1 mA IO 40 mA 14.25 15.75 V 1 mA IO 70 mA 14.25 15.75 V 6.0 mA With Line 20 V VI 30 V TJ = 25C 1.5 mA With Load 1 mA IO 40 mA 0.1 mA IQ Quiescent Current Change VN Output Noise Voltage VO/T 14.4 17.5 V VI 30 V 17.5 V VI Min. Typ. Max. Unit 2.1 TA = 25C, 10 Hz f 100 kHz Temperature Coefficient of VO IO = 5 mA RR Ripple Rejection f = 120 Hz, 18.5 V VI 28.5 V, TJ = 25C VD Dropout Voltage TJ = 25C 34 90 V/Vo -1.3 mV/C 60 dB 1.7 V Notes: 9. The maximum steady-state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represents pulse test conditions with junction temperature as indicated at the initiation of tests. 10. Power dissipation PD 0.75 W. (c) 2002 Fairchild Semiconductor Corporation MC78LXXA / LM78LXXA Rev. 1.9 www.fairchildsemi.com 7 MC78LXXA / LM78LXXA -- 3-Terminal 0.1 A Positive Voltage Regulator Electrical Characteristics (MC78L15A) 3(8) MC78LXXA/LM78LXXA KA78LXXA NOTE 1 MC78LXXA / LM78LXXA(13) INPUT 1(1) (14) CI C1 0.33 F NOTE 2 2(2,3,6,7) OUTPUT CO (14) 0. 1 F NOTE 2 Figure 2. Typical Application Notes: 13. To specify an output voltage, substitute voltage value for "XX". 14. CI is required if the regulator is located an appreciable distance from the power supply filter. Though Co is not needed for stability, it improves transient response. Bypass capacitors are recommended for optimum stability and transient response and should be located as close as possible to the regulator. (c) 2002 Fairchild Semiconductor Corporation MC78LXXA / LM78LXXA Rev. 1.9 www.fairchildsemi.com 8 MC78LXXA / LM78LXXA -- 3-Terminal 0.1 A Positive Voltage Regulator Typical Application 4.70 C 4.30 1.87 C 1.45 A B 1.40 CL SYMM 2.70 C 2.30 4.50 C 3.90 1.30 0.89 2.23 MIN 0.50 X 45 0.30 X 45 1 2 5.30 MIN 90 3 2.00 MIN 0.52 (2X) C 0.30 0.54 0.10 M 1.50 1 C A B 2 0.90 MIN 2X 3.00 3 0.96 MIN 1.50 1.70 C 1.30 3.00 MIN LAND PATTERN RECOMMENDATION SEATING PLANE C 0.35 0.60 C 0.40 3 0.50 0.35 1 2.70 NOTES: UNLESS OTHERWISE SPECIFIED. A. REFERENCE TO JEDEC TO-243 VARIATION AA. B. ALL DIMENSIONS ARE IN MILLIMETERS. C DOES NOT COMPLY JEDEC STANDARD VALUE. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSION. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5-1994. F. DRAWING FILE NAME: MA03CREV3 2.29 2.13 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com