Lichtleiter, liegend 2 x 5mm / O3mm O3m Light Guide, horizontal 2 x 5mm / O3mm O3m Allgemeine Hinweise und Technische Daten Allgemeine Hinweise: siehe Seite 3 Technische Daten LED's: siehe Seite 39 LL-Werkstoff: PMMA glasklar UL94 Umgebungstemperatur: -40C ... +85C ESD-Schutz: <12kV General Remarks and Technical Data General Remarks: see page 3 Technical Data LEDs: see page 39 LL-Material: PMMA clear UL94 Ambient Temperature: -40C ... +85C ESD-Protection: <12kV Dieser Lichtleiter wird uber zwei Einpresszapfen in der Leiterkarte gehalten. Das System ist nach FEL anreihbar. Die Verwendung der Lichtleiter erfolgt in Verbindung mit SMD-LED`s. Das Licht wird in Form eines Lichtleiters von 2 x 5mm bzw. O3mm parallel zur Leiterkarte an die Frontplatte gefuhrt. Die Lange A des Lichtleiters ist variabel von 8,1-45mm lieferbar. This light guide is held by means of two spigots in the circuit card. The system can be strip-mounted in grid dimensions of FEL. The light guides are used in connection with SMD LEDs. The light is led in form of a light guide by 2 x 5mm and/or O3mm parallel to the circuit card to the front plate. The length A of the light guide is variable available by 8,1-45mm. 2.9 3 O3 8.5 0.45 5.6 x45 18.29 Empfohlene LED's Recommended LEDs L1 - L12 8,1 Art.-Nr. 1271.1000 1984 1271.1000 5.08 A Mindestmengen fur Sonderlangen = 3.000 Stuck / auf Anfrage Minimum quantity for special length = 3.000 pieces / on request A 8.5 3 2 2.9 0.45x45 5.6 5 18.29 Empfohlene LED's Recommended LEDs L1 - L12 8,1 Art.-Nr. 1273.1001 1985 1273.1001 5.08 A A 4.5 1.2 Mindestmengen fur Sonderlangen = 3.000 Stuck / auf Anfrage Minimum quantity for special length = 3.000 pieces / on request O 2.4 2.4 8.5 Layoutvorschlag * Layout Suggestion 8 Magerdruck keine Lagerware * Bestellmenge und Preise auf Anfrage * Light printing non-stock item * Quantity and prices on request LL_11_1_Products_03_42_v4_cs3.indd 8 18.08.2008 14:31:07