3M Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000 For technical, sales or ordering information call
800-225-5373
.100″and .100″ .100″Pin Strip Header
Straight & Right Angle, Solder Tail 2400 Series
14
TS-0767-03
Sheet 1 of 3
One and two row versions
Straight and right angle versions
Break to length for faster delivery, lower
inventory costs, and faster prototyping
Tapered tip does not cut the socket
wipe during insertion, reducing operational
failures and repairs
Solder standoffs facilitate wash of flux residue,
reducing costly rework
Board pin retention feature available
Date Modified: December 28, 1999
Physical
Insulation
Material: Glass Filled Polyester (PBT)
Flammability: UL 94V-0
Color: Gray
Contact
Material: Copper Alloy
Plating
Underplate: 100 µ″ [ 2.54 µm ] Nickel — QQ-N-290, Class 2
Wiping Area: 30 µ″ [ 0.76 µm ] Gold — MIL-G-45204, Type II, Grade C
Solder Tails: 200 µ″ [ 5.08 µm ] 90/10 Tin Lead — MIL-P-81728
Electrical
Current Rating: 3 A
Insulation Resistance: > 1 × 109 Ω at 500 Vdc
Withstanding Voltage: 1000 Vrms at Sea Level
Environmental
Temperatur e Rating: –55°C to +105°C
UL File No.: E68080
3M Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000 For technical, sales or ordering information call
800-225-5373
.100″and .100″ .100″Pin Strip Header
Straight & Right Angle, Solder Tail 2400 Series
Pin Quantity
One
Row Two
Row Dimension
C
01 0.09 [ 2.3]
02 04 0.19 [ 4.8]
03 06 0.29 [ 7.4]
04 08 0.39 [ 9.9]
05 10 0.49 [12.4]
06 12 0.59 [15.0]
07 14 0.69 [17.5]
08 16 0.79 [20.1]
09 18 0.89 [22.6]
10 20 0.99 [25.1]
11 22 1.09 [27.7]
12 24 1.19 [30.2]
13 26 1.29 [32.8]
14 28 1.39 [35.3]
15 30 1.49 [37.8]
16 32 1.59 [40.4]
17 34 1.69 [42.9]
18 36 1.79 [45.5]
19 38 1.89 [48.0]
20 40 1.99 [50.5]
21 42 2.09 [53.1]
22 44 2.19 [55.6]
23 46 2.29 [58.2]
24 48 2.39 [60.7]
25 50 2.49 [63.2]
26 52 2.59 [65.8]
27 54 2.69 [68.3]
28 56 2.79 [70.9]
29 58 2.89 [73.4]
30 60 2.99 [75.9]
31 62 3.09 [78.5]
32 64 3.19 [81.0]
33 66 3.29 [83.6]
34 68 3.39 [86.1]
35 70 3.49 [88.6]
36 72 3.59 [91.2]
37 74 3.69 [93.7]
38 76 3.79 [96.3]
39 78 3.89 [98.8]
40 80 3.98 [101.1]
Tail (Dim B)
One Row
12=.112″ Solder Tails
13=.155″ Solder Tails
32=.112″ Kinked Solder Tails
Pin Length
(Dim A)
1 = .235″
2 = .318″
Pin Quantity:
(See Table)
One Row (01–40)
Two Row (04–80)
.015 ± .002
[ 0.38 ]
∅ .035 ± .003
[0.89 ]
(See Note 2)
.100 ± .003 Typ
[ 2.54 ]
.028 ± .001
[ 0.71 ]
.0245 ± .0005
[ 0.622 ]
24XX-6XXXTB
Ordering Information
Recommended Mounting Hole Pattern
R .0075 Ref
[ 0.190 ]
Pin Cross Section
TS-0767-03
Sheet 2 of 3
B .010
.048
[1.22]
A .008
.100
[2.54]
.04
[1.0]
.096
[2.44]
.100
[2.54]
C +.020
–.005
(See note 1)
Notes;
1. This part is molded in the 40 contact quantity version. Parts that require fewer contacts are
broken to length. Dimension “C” is measured from a “Molded End” to the “Center of the Break
Point” beyond the desired quantity. On Pin Strips, which have break points on both ends, “C” =
.100″ x contact quantity per row.
2. The recommended PCB hole size for the kinked tail positions on the .112″ solder tail connector is
.035″ ± .002. Refer to TS-0971 for the number of tails kinked and the position kinked.
.0 .00
Inch
[mm]
Inch ± .005± .1 ± .01
Tolerance Unless Noted
.000
[ ] Dimensions for
Reference Only
.100
[2.54]
.048
[1.22]
B .008
C +.020
– .005
(See Note 1)
.196
[4.98]
.035 .003
[0.89]
(See Note 2)
.100 .003
[2.54]
.100 .003
[2.54]
Two Row
22=.112″ Solder Tails
23=.155″ Solder Tails
72=.112″ Kinked Solder Tails
A .008
.04
[1.0]
Straight
3M Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000 For technical, sales or ordering information call
800-225-5373
.100″and .100″ .100″Pin Strip Header
Straight & Right Angle, Solder Tail 2400 Series
Pin Quantity
One
Row Two
Row Dimension
C
01 02 0.09 [ 2.3]
02 04 0.19 [ 4.8]
03 06 0.29 [ 7.4]
04 08 0.39 [ 9.9]
05 10 0.49 [12.4]
06 12 0.59 [15.0]
07 14 0.69 [17.5]
08 16 0.79 [20.1]
09 18 0.89 [22.6]
10 20 0.99 [25.1]
11 22 1.09 [27.7]
12 24 1.19 [30.2]
13 26 1.29 [32.8]
14 28 1.39 [35.3]
15 30 1.49 [37.8]
16 32 1.59 [40.4]
17 34 1.69 [42.9]
18 36 1.79 [45.5]
19 38 1.89 [48.0]
20 40 1.99 [50.5]
21 42 2.09 [53.1]
22 44 2.19 [55.6]
23 46 2.29 [58.2]
24 48 2.39 [60.7]
25 50 2.49 [63.2]
26 52 2.59 [65.8]
27 54 2.69 [68.3]
28 56 2.79 [70.9]
29 58 2.89 [73.4]
30 60 2.99 [75.9]
31 62 3.09 [78.5]
32 64 3.19 [81.0]
33 66 3.29 [83.6]
34 68 3.39 [86.1]
35 70 3.49 [88.6]
36 72 3.59 [91.2]
37 74 3.69 [93.7]
38 76 3.79 [96.3]
39 78 3.89 [98.8]
40 80 3.98 [101.1]
Notes:
1. This part is molded in the 40 contact quantity version. Parts that require
fewer contacts are broken to length. Dimension “C’’ is measured from a
‘‘Molded End’’ to the ‘‘Center of the Break Point’’ beyond the desired
quantity. On Pin Strips, which have break points on both ends, ‘‘C’’ = .100″
x contact quantity per row.
2. The recommended PCB hole size for the kinked tail positions on the .112″
solder tail connector is .035″ ± .002. Refer to ts–0971 for the number of
tails kinked and the position kinked.
.028 ± .001
[ 0.71 ]
.0245 ± .0005
[ 0.622 ]
∅ .035 ± .003
[0.89 ]
(See Note 2)
.100 ± .003 Typ
[ 2.54 ]
.045 ± .002
[ 1.14 ]
.04
[1.0]
C +.020
–.005
(See Note 1) .119
[3.02]
A .008
B .010
.100
[2.54]
.071
[1.80]
.100
[2.54]
.07
[1.8]
Recommended
Mounting Hole
Pattern
Pin Cross Section
R .0075 Ref
[0.190]
Ordering Information
TS-0767-03
Sheet 3 of 3
Tail (Dim B)
One Row
12=.112″ Solder Tails
13=.155″ Solder Tails
32=.112″ Kinked Solder Tails
Pin Length
(Dim A)
1 = .235″
2 = .318″
Pin Quantity:
(See Table)
One Row (01-40)
Two Row (02–80)
24XX-5XXXTB
Inch
[mm]
± .005± .1 ± .01
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
∅ .035 ± .003
[ 0.89 ]
( See Note 2 )
.100 .003
[2.54]
.100 .003
[2.54]
.100
[2.54]
A .008
.071
[1.80]
.045 ± .002
[ 1.14 ]
C +.020
– .005
(See Note 1)
.219
[5.56]
.04
[1.0]
B .010
.07
[1.8]
.100
[2.54]
.100
[2.54]
.100
[2.54]
Right Angle
Two Row
22=.112″ Solder Tails
23=.155″ Solder Tails
72=.112″ Kinked Solder Tails
